How to Use Color Fill in Procreate

Although there are many digital art tools, Procreate It stands out for a reason. It's designed. to draw original art Using a stylus and tablet gives you the experience of using pen and paper. You can also trace visual elements easily, but using them to fill in color isn't as straightforward. However, whether you've interacted with Procreate or are a beginner, you can learn to fill in color in multiple ways with a little guidance. This article explains five different ways to fill in color in Procreate. Keep reading to find out which method works best for you.

How to Fill Color in Procreate

Procreate is a masterpiece for anyone passionate about digital art. It comes iPad and iPhone tool With over 200 built-in customizable brushes, Procreate adds variety to your artwork. Aside from brushes, Procreate features a modern paint bucket and ColorDrop, which helps you fill enclosed areas with color. These tools can save you a lot of time that you would otherwise waste by avoiding the painstaking task of over-drawing lines.

The great thing about Procreate is that it lets you do one thing in multiple ways. Here, we discuss five ways to fill in color in Procreate.

Fill color with reference layer

Do you live to create clean art and preserve? Your artistic line Sounds good? Filling the reference layer with color can help you live the dream. This method adds a layer to your art, keeping the basic line drawing and color parts separate.

The reference layer works with ColorDrop. It defines enclosed sections of your line art that you want to draw. ColorDrop can then drag and drop colors into the enclosed areas. This method allows you to draw quickly and experiment with multiple colors.

How do you fill color in Procreate using a reference layer? Follow these instructions:

1. created clean art line On your board or open an existing line.                       
2. Tap anywhere inside the clean art with your finger or stylus to open. Its settings. Shows Toolbar in the upper right corner.
3. Locate "class symbol" (Two interlocking squares) from the toolbar.
4. Your active layer is selected and highlighted in blue on your canvas. Click it to open it. More options.
5. In the drop-down menu that opens on the left, scroll down to the bottom and click on "reference". This turns the line drawing layer into a reference for subsequent steps.                                                               
6. Go to the Layer panel and press the button "addition" On the right. Select another layer above your reference. You're now ready to start drawing.
7. With the new layer in the line drawing highlighted, go to the top right corner and tap the icon "Circle". You can now select the color you want from the pop-up colors.                                                             
8. Click the color, then drag and drop it into a closed section of your art. A closed section means that all the edges of the shape are touching. If they aren't connected, the color fill won't work.                                                                         
9. Choose “Follow-up packing” At the top, fill in the color for more sections. When you're done, go back to the layer settings and change the settings from "reference" To normal mode.

Fill color with color drag

Filling in colors with clouds is simple and won't take much of your time. It works similarly to the reference method. The only difference is that you don't need to add another layer to your existing line drawing. Therefore, any color you add becomes one with your art. This method may be less convenient if you want to experiment with multiple colors.

Here's how to fill color by dragging in Procreate:

1. Create draw a clean line Or open a saved one from your device.
2. Click anywhere inside the art line to open. Settings.                         
3. Choose a symbol The circle In the upper right corner and select the color you want.                   
4. Pull the color And he dropped it in Closed section From the drawing.                           
5. tap on “Follow-up packing” To fill in more closed sections of the drawing.

Fill color by selection

If your art contains thick outlines, you'll quickly fill in color with this method. Conversely, you might find it tedious if your line drawing contains broad strokes. Another thing to note is that filling in color with this method is tedious because it requires you to manually select specific sections of the line drawing to fill with color.

The following steps demonstrate filling color by selection:

1. Open draw a line Exist or create one.                                             
2. Go to exhibition In the upper left corner, select the icon. "S". This activates the selection option.
3. A menu will appear at the bottom with four options: automatic , And Freehand , And Rectangle , And Ellipse. Choose Freehand To make your selections via pen or touch.                                                                                     
4. Below the selection options, click the icon. "addition" و "Color Fill" To activate them. The option allows you to "addition" Make multiple selections, while filling in the option. "Color Fill" Your choices are automatically set to the color you have activated in the color picker.
5. With Freehand mode activated, navigate to your line drawing and make a selection. It will automatically fill with color. You can make more selections until you're satisfied.

Alternatively, you can use ColorDrop instead of filling in a color. Once you've made your selection, drag and drop the color from the color palette in the upper right corner.

Fill color with Alpha Lock

Most artists typically spend a long time drawing around the borders of line art. Even a slight deviation will add extra work to undo and redo. But with alpha lock, you can overcome this obstacle. With alpha lock active, simply select a layer and paint without worrying about going beyond the borders.

However, this method is less preferred because it merges all layers into a single layer after saving. Therefore, you won't be able to customize your work or undo your drawings.

Use the following steps to fill with color using alpha lock:

1. Create piece of art You want to fill it with color or open an existing one.       
2. Click anywhere inside the line drawing to activate. Settings.                     
3. select icon "Layers" in the upper right corner.                                     
4. Click on active layer (The layer highlighted in blue).                 
5. In the menu that opens on the left, enable Alpha LockOnce you've activated alpha lock, you can return to your drawing and paint on the selected layer. After painting, remember to turn off alpha lock in the settings.           

Fill color with brush strokes

This is a manual method of filling in color on your artwork. As much as it's a fun way to find relaxation from art, you may find it time-consuming if you want to paint faster. There's also a significant risk of painting over the lines. However, you can use an eraser to remove unwanted strokes.

You can fill in color using brushes and strokes on Procreate using the following steps:

1. Open The artwork Your own and click anywhere within its borders.           
2. In the menu that appears, click the icon. "circular" To choose the color you want.
3. Click icon Studio Pen And start drawing your art. To move faster, you can enlarge the brush by selecting the plus sign on the right side of the screen.

Make your Procreate art colorful

All of the methods above will help you fill color into your art. Some methods are quick and stick to lines only, while others allow for more creative experimentation. You can adapt your coloring process to different art styles that suit your needs. Remember, practice is key to mastering Procreate's coloring features.

Have you tried any of these color fill methods in Procreate? Share your thoughts and let us know which one works best for you in the comments section below.