System error codes will appear in programs and in various areas within the Windows operating system after certain errors occur. Unfortunately, sometimes all you get is a system error code but nothing about what the code means! Once you know what the code means (below), you can then work on fixing the problem.
Note: The system error code is not the same as the Device Manager error code, or the POST , STOP code, or browser error code, although the error numbers may sometimes be the same.
Complete list of Windows system error codes
This table details the complete list of system error codes in Windows.
Tip: You can quickly find an item on this page by using the Ctrl+F keyboard combination in your browser to search for the error code. You can either search for the message itself or just the code, such as "Error Code 635."
| List of Windows System Error Codes | |
| code | Describe |
| Error code 1 | Invalid function. [ERROR_INVALID_FUNCTION (0x1)] |
| Error code 2 | The system cannot find the file specified. [ERROR_FILE_NOT_FOUND (0x2)] |
| Error code 3 | The system cannot find the path specified. [ERROR_PATH_NOT_FOUND (0x3)] |
| Error code 4 | The system cannot open the file. [ERROR_TOO_MANY_OPEN_FILES (0x4)] |
| Error code 5 | Access denied. [ERROR_ACCESS_DENIED (0x5)] |
| Error code 6 | The handle is invalid. [ERROR_INVALID_HANDLE (0x6)] |
| Error code 7 | Storage control blocks were destroyed. [ERROR_ARENA_TRASHED (0x7)] |
| Error code 8 | There is not enough space to complete this command. [ERROR_NOT_ENOUGH_MEMORY (0x8)] |
| Error code 9 | The storage control block address is invalid. [ERROR_INVALID_BLOCK (0x9)] |
| Error code 10 | The environment is incorrect. [ERROR_BAD_ENVIRONMENT (0xA)] |
| Error code 11 | An attempt was made to load a program in an incorrect format. [ERROR_BAD_FORMAT (0xB)] |
| Error code 12 | Invalid access code. [ERROR_INVALID_ACCESS (0xC)] |
| Error code 13 | Invalid data. [ERROR_INVALID_DATA (0xD)] |
| Error code 14 | Not enough storage to complete this operation. [ERROR_OUTOFMEMORY (0xE)] |
| Error code 15 | The system cannot find the specified drive. [ERROR_INVALID_DRIVE (0xF)] |
| Error code 16 | The directories cannot be moved. [ERROR_CURRENT_DIRECTORY (0x10)] |
| Error code 17 | The system cannot move the file to a different drive. [ERROR_NOT_SAME_DEVICE (0x11)] |
| Error code 18 | There are no more files. [ERROR_NO_MORE_FILES (0x12)] |
| Error code 19 | The media is write protected. [ERROR_WRITE_PROTECT (0x13)] |
| Error code 20 | The system cannot find the specified device. [ERROR_BAD_UNIT (0x14)] |
| Error code 21 | The device is not ready. [ERROR_NOT_READY (0x15)] |
| Error code 22 | The device does not recognize the command. [ERROR_BAD_COMMAND (0x16)] |
| Error code 23 | Data error (cyclic redundancy check). [ERROR_CRC (0x17)] |
| Error code 24 | The program issued a command, but the command length is incorrect. [ERROR_BAD_LENGTH (0x18)] |
| Error code 25 | The drive cannot locate a specific area or track on the disk. [ERROR_SEEK (0x19)] |
| Error code 26 | The specified disk or floppy disk cannot be accessed. [ERROR_NOT_DOS_DISK (0x1A)] |
| Error code 27 | The drive cannot find the requested sector. [ERROR_SECTOR_NOT_FOUND (0x1B)] |
| Error code 28 | The printer ran out of paper. [ERROR_OUT_OF_PAPER (0x1C)] |
| Error code 29 | The system cannot write to the specified device. [ERROR_WRITE_FAULT (0x1D)] |
| Error code 30 | The system cannot read from the specified device. [ERROR_READ_FAULT (0x1E)] |
| Error code 31 | The device connected to the system is not working. [ERROR_GEN_FAILURE (0x1F)] |
| Error code 32 | The process cannot access the file because it is in use by another process. [ERROR_SHARING_VIOLATION (0x20)] |
| Error code 33 | The process cannot access the file because another process has locked part of the file. [ERROR_LOCK_VIOLATION (0x21)] |
| Error code 34 | The wrong floppy disk is in the drive. Enter %2 (the serial number of the volume). |
| Error code 36 | You have opened too many files for sharing. [ERROR_SHARING_BUFFER_EXCEEDED (0x24)] |
| Error code 38 | End of file reached. [ERROR_HANDLE_EOF (0x26)] |
| Error code 39 | The disk is full. [ERROR_HANDLE_DISK_FULL (0x27)] |
| Error code 50 | This request is not supported. [ERROR_NOT_SUPPORTED (0x32)] |
| Error code 51 | Windows cannot find the network path. Verify that the network path is correct and that the destination computer is not busy or turned off. If Windows still cannot find the network path, contact your network administrator. [ERROR_REM_NOT_LIST (0x33)] |
| Error code 52 | You could not connect because of a duplicate network name. If you are joined to a domain, go to System in Control Panel to change the computer name and try again. If you are joined to a workgroup, choose a different workgroup name. [ERROR_DUP_NAME (0x34)] |
| Error code 53 | The network path was not found. [ERROR_BAD_NETPATH (0x35)] |
| Error code 54 | The network is busy. [ERROR_NETWORK_BUSY (0x36)] |
| Error code 55 | The specified network device or resource is no longer available. [ERROR_DEV_NOT_EXIST (0x37)] |
| Error code 56 | The network BIOS command limit has been reached. [ERROR_TOO_MANY_CMDS (0x38)] |
| Error code 57 | An error occurred with the network adapter device. [ERROR_ADAP_HDW_ERR (0x39)] |
| Error code 58 | The specified server could not perform the requested operation. [ERROR_BAD_NET_RESP (0x3A)] |
| Error code 59 | An unexpected network error occurred. [ERROR_UNEXP_NET_ERR (0x3B)] |
| Error code 60 | The remote adapter is incompatible. [ERROR_BAD_REM_ADAP (0x3C)] |
| Error code 61 | The printer queue is full. [ERROR_PRINTQ_FULL (0x3D)] |
| Error code 62 | The server does not have enough space to store the file waiting to be printed. [ERROR_NO_SPOOL_SPACE (0x3E)] |
| Error code 63 | Your file waiting to print has been deleted. [ERROR_PRINT_CANCELLED (0x3F)] |
| Error code 64 | The specified network name is no longer available. [ERROR_NETNAME_DELETED (0x40)] |
| Error code 65 | Network access denied. [ERROR_NETWORK_ACCESS_DENIED (0x41)] |
| Error code 66 | Invalid network resource type. [ERROR_BAD_DEV_TYPE (0x42)] |
| Error code 67 | The network name could not be found. [ERROR_BAD_NET_NAME (0x43)] |
| Error code 68 | The name limit for the local computer's network adapter card has been exceeded. [ERROR_TOO_MANY_NAMES (0x44)] |
| Error code 69 | The network BIOS session limit has been exceeded. [ERROR_TOO_MANY_SESS (0x45)] |
| Error code 70 | The remote server is paused or is running. [ERROR_SHARING_PAUSED (0x46)] |
| Error code 71 | No more connections can be made to this remote computer at this time because there are too many connections for the computer to accept. [ERROR_REQ_NOT_ACCEP (0x47)] |
| Error code 72 | The specified printer or disk device has been stopped. [ERROR_REDIR_PAUSED (0x48)] |
| Error code 80 | The file exists. [ERROR_FILE_EXISTS (0x50)] |
| Error code 82 | The directory or file could not be created. [ERROR_CANNOT_MAKE (0x52)] |
| Error code 83 | INT 24 failed. [ERROR_FAIL_I24 (0x53)] |
| Error code 84 | Storage to process this request is unavailable. [ERROR_OUT_OF_STRUCTURES (0x54)] |
| Error code 85 | The local device name is already in use. [ERROR_ALREADY_ASSIGNED (0x55)] |
| Error code 86 | The specified network password is incorrect. [ERROR_INVALID_PASSWORD (0x56)] |
| Error code 87 | The parameter is invalid. [ERROR_INVALID_PARAMETER (0x57)] |
| Error code 88 | A network write error occurred. [ERROR_NET_WRITE_FAULT (0x58)] |
| Error code 89 | The system cannot start another process at this time. [ERROR_NO_PROC_SLOTS (0x59)] |
| Error code 100 | Another system signal cannot be created. [ERROR_TOO_MANY_SEMAPHORES (0x64)] |
| Error code 101 | The signal is owned exclusively by another process. [ERROR_EXCL_SEM_ALREADY_OWNED (0x65)] |
| Error code 102 | The signal is set and cannot be closed. [ERROR_SEM_IS_SET (0x66)] |
| Error code 103 | The flag cannot be set again. [ERROR_TOO_MANY_SEM_REQUESTS (0x67)] |
| Error code 104 | Exclusive signals cannot be requested at interrupt time. [ERROR_INVALID_AT_INTERRUPT_TIME (0x68)] |
| Error code 105 | The previous ownership of this signal has expired. [ERROR_SEM_OWNER_DIED (0x69)] |
| Error code 106 | Insert floppy disk for drive %1. [ERROR_SEM_USER_LIMIT (0x6A)] |
| Error code 107 | The program stopped because a replacement floppy disk was not inserted. [ERROR_DISK_CHANGE (0x6B)] |
| Error code 108 | The disk is in use or locked by another process. [ERROR_DRIVE_LOCKED (0x6C)] |
| Error code 109 | The pipe is broken. [ERROR_BROKEN_PIPE (0x6D)] |
| Error code 110 | The system cannot open the specified device or file. [ERROR_OPEN_FAILED (0x6E)] |
| Error code 111 | The file name is too long. [ERROR_BUFFER_OVERFLOW (0x6F)] |
| Error code 112 | There is not enough space on the disk. [ERROR_DISK_FULL (0x70)] |
| Error code 113 | No more internal file IDs available. [ERROR_NO_MORE_SEARCH_HANDLES (0x71)] |
| Error code 114 | The target internal file ID is invalid. [ERROR_INVALID_TARGET_HANDLE (0x72)] |
| Error code 117 | The IOCTL call made by the application program is invalid. [ERROR_INVALID_CATEGORY (0x75)] |
| Error code 118 | The value of the write verification switch parameter is invalid. [ERROR_INVALID_VERIFY_SWITCH (0x76)] |
| Error code 119 | The system does not support the requested command. [ERROR_BAD_DRIVER_LEVEL (0x77)] |
| Error code 120 | This function is not supported on this system. [ERROR_CALL_NOT_IMPLEMENTED (0x78)] |
| Error code 121 | The signal timed out. [ERROR_SEM_TIMEOUT (0x79)] |
| Error code 122 | The data area passed to the system call is too small. [ERROR_INSUFFICIENT_BUFFER (0x7A)] |
| Error code 123 | The file name, directory name, or volume label syntax is invalid. [ERROR_INVALID_NAME (0x7B)] |
| Error code 124 | The system call level is incorrect. [ERROR_INVALID_LEVEL (0x7C)] |
| Error code 125 | The disk has no volume label. [ERROR_NO_VOLUME_LABEL (0x7D)] |
| Error code 126 | The specified module could not be found. [ERROR_MOD_NOT_FOUND (0x7E)] |
| Error code 127 | The specified procedure could not be found. [ERROR_PROC_NOT_FOUND (0x7F)] |
| Error code 128 | There are no child processes to wait for. [ERROR_WAIT_NO_CHILDREN (0x80)] |
| Error code 129 | Application %1 cannot be run in Win32 mode. [ERROR_CHILD_NOT_COMPLETE (0x81)] |
| Error code 130 | Attempt to use a file handle to an open disk partition for an operation other than primary disk I/O. [ERROR_DIRECT_ACCESS_HANDLE (0x82)] |
| Error code 131 | An attempt was made to move the file pointer before the beginning of the file. [ERROR_NEGATIVE_SEEK (0x83)] |
| Error code 132 | The file pointer cannot be set to the specified device or file. [ERROR_SEEK_ON_DEVICE (0x84)] |
| Error code 133 | The JOIN or SUBST command cannot be used for a drive that contains previously connected drives. [ERROR_IS_JOIN_TARGET (0x85)] |
| Error code 134 | An attempt was made to use a JOIN or SUBST command on a drive that was already joined. [ERROR_IS_JOINED (0x86)] |
| Error code 135 | An attempt was made to use a JOIN or SUBST command on a drive that has already been replaced. [ERROR_IS_SUBSTED (0x87)] |
| Error code 136 | The system attempted to delete a JOIN for an unattached drive. [ERROR_NOT_JOINED (0x88)] |
| Error code 137 | The system attempted to delete a drive replacement that was not replaced. [ERROR_NOT_SUBSTED (0x89)] |
| Error code 138 | The system attempted to join the drive to a directory on a joined drive. [ERROR_JOIN_TO_JOIN (0x8A)] |
| Error code 139 | The system attempted to replace the drive with a directory on a replaced drive. [ERROR_SUBST_TO_SUBST (0x8B)] |
| Error code 140 | The system attempted to join a drive to a directory on an alternate drive. [ERROR_JOIN_TO_SUBST (0x8C)] |
| Error code 141 | The system attempted to substitute a drive with a directory on a joined drive. [ERROR_SUBST_TO_JOIN (0x8D)] |
| Error code 142 | The system cannot perform a JOIN or SUBST at this time. [ERROR_BUSY_DRIVE (0x8E)] |
| Error code 143 | The system cannot join or replace a drive with a directory on the same drive. [ERROR_SAME_DRIVE (0x8F)] |
| Error code 144 | The directory is not a subdirectory of the root directory. [ERROR_DIR_NOT_ROOT (0x90)] |
| Error code 145 | The directory is not empty. [ERROR_DIR_NOT_EMPTY (0x91)] |
| Error code 146 | The specified path is used in an alternative. [ERROR_IS_SUBST_PATH (0x92)] |
| Error code 147 | There are not enough resources available to process this. [ERROR_IS_JOIN_PATH (0x93)] |
| Error code 148 | The specified path cannot be used at this time. [ERROR_PATH_BUSY (0x94)] |
| Error code 149 | An attempt was made to join or replace a drive where a directory on the drive is the target of a previous substitute. [ERROR_IS_SUBST_TARGET (0x95)] |
| Error code 150 | System tracing information is not specified in the CONFIG.SYS file or tracing is not allowed. [ERROR_SYSTEM_TRACE (0x96)] |
| Error code 151 | The number of signal events specified for DosMuxSemWait is incorrect. [ERROR_INVALID_EVENT_COUNT (0x97)] |
| Error code 152 | DosMuxSemWait did not execute too many signals already set. [ERROR_TOO_MANY_MUXWAITERS (0x98)] |
| Error code 153 | The DosMuxSemWait list is invalid. [ERROR_INVALID_LIST_FORMAT (0x99)] |
| Error code 154 | The volume label you entered exceeds the label character limit of the target file system. [ERROR_LABEL_TOO_LONG (0x9A)] |
| Error code 155 | Unable to create another topic. [ERROR_TOO_MANY_TCBS (0x9B)] |
| Error code 156 | The receiver process rejected the signal. [ERROR_SIGNAL_REFUSED (0x9C)] |
| Error code 157 | The segment has already been discarded and cannot be locked. [ERROR_DISCARDED (0x9D)] |
| Error code 158 | The segment is already open. [ERROR_NOT_LOCKED (0x9E)] |
| Error code 159 | The thread ID address is invalid. [ERROR_BAD_THREADID_ADDR (0x9F)] |
| Error code 160 | One or more arguments are invalid. [ERROR_BAD_ARGUMENTS (0xA0)] |
| Error code 161 | The specified path is invalid. [ERROR_BAD_PATHNAME (0xA1)] |
| Error code 162 | Signal already pending. [ERROR_SIGNAL_PENDING (0xA2)] |
| Error code 164 | No more threads can be created in the system. [ERROR_MAX_THRDS_REACHED (0xA4)] |
| Error code 167 | An area of the file could not be locked. [ERROR_LOCK_FAILED (0xA7)] |
| Error code 170 | The requested resource is in use. [ERROR_BUSY (0xAA)] |
| Error code 173 | The lock request was not pending for the submitted cancellation region. [ERROR_CANCEL_VIOLATION (0xAD)] |
| Error code 174 | The file system does not support atomic changes to the lock type. [ERROR_ATOMIC_LOCKS_NOT_SUPPORTED (0xAE)] |
| Error code 180 | The system detected an invalid part number. [ERROR_INVALID_SEGMENT_NUMBER (0xB4)] |
| Error code 182 | The operating system cannot start %1. [ERROR_INVALID_ORDINAL (0xB6)] |
| Error code 183 | A file cannot be created when the file already exists. [ERROR_ALREADY_EXISTS (0xB7)] |
| Error code 186 | The flag is invalid. [ERROR_INVALID_FLAG_NUMBER (0xBA)] |
| Error code 187 | The specified signal system name was not found. [ERROR_SEM_NOT_FOUND (0xBB)] |
| Error code 188 | The operating system cannot start %1. [ERROR_INVALID_STARTING_CODESEG (0xBC)] |
| Error code 189 | The operating system cannot start %1. [ERROR_INVALID_STACKSEG (0xBD)] |
| Error code 190 | The operating system cannot start %1. [ERROR_INVALID_MODULETYPE (0xBE)] |
| Error code 191 | %1 cannot run in Win32 mode. [ERROR_INVALID_EXE_SIGNATURE (0xBF)] |
| Error code 192 | The operating system cannot launch %1. [ERROR_EXE_MARKED_INVALID (0xC0)] |
| Error code 193 | %1 is not a valid Win32 application. [ERROR_BAD_EXE_FORMAT (0xC1)] |
| Error code 194 | The operating system cannot run %1. [ERROR_ITERATED_DATA_EXCEEDS_64K (0xC2)] |
| Error code 195 | The operating system cannot run %1. [ERROR_INVALID_MINALLOCSIZE (0xC3)] |
| Error code 196 | The operating system cannot run this application program. [ERROR_DYNLINK_FROM_INVALID_RING (0xC4)] |
| Error code 197 | The operating system is not currently configured to run this application. [ERROR_IOPL_NOT_ENABLED (0xC5)] |
| Error code 198 | The operating system cannot start %1. [ERROR_INVALID_SEGDPL (0xC6)] |
| Error code 199 | The operating system cannot run this application program. [ERROR_AUTODATASEG_EXCEEDS_64K (0xC7)] |
| Error code 200 | The code segment cannot be greater than or equal to 64 KB. [ERROR_RING2SEG_MUST_BE_MOVABLE (0xC8)] |
| Error code 201 | The operating system cannot run %1. [ERROR_RELOC_CHAIN_XEEDS_SEGLIM (0xC9)] |
| Error code 202 | The operating system cannot start %1. [ERROR_INFLOOP_IN_RELOC_CHAIN (0xCA)] |
| Error code 203 | The system could not find the environment option you entered. [ERROR_ENVVAR_NOT_FOUND (0xCB)] |
| Error code 205 | No process in the subtree has a signal handler. [ERROR_NO_SIGNAL_SENT (0xCD)] |
| Error code 206 | The file name or extension is too long. [ERROR_FILENAME_EXCED_RANGE (0xCE)] |
| Error code 207 | Ring stack 2 is in use. [ERROR_RING2_STACK_IN_USE (0xCF)] |
| Error code 208 | The generic file name characters, * or ?, were entered incorrectly or too many generic file name characters were specified. [ERROR_META_EXPANSION_TOO_LONG (0xD0)] |
| Error code 209 | The signal being posted is invalid. [ERROR_INVALID_SIGNAL_NUMBER (0xD1)] |
| Error code 210 | The signal handler cannot be set. [ERROR_THREAD_1_INACTIVE (0xD2)] |
| Error code 212 | The segment is locked and cannot be reallocated. [ERROR_LOCKED (0xD4)] |
| Error code 214 | Too many dynamic link modules are attached to this program or dynamic link module. [ERROR_TOO_MANY_MODULES (0xD6)] |
| Error code 215 | Calls cannot be nested with LoadModule. [ERROR_NESTING_NOT_ALLOWED (0xD7)] |
| Error code 216 | Version %1 is incompatible with the version you are running. Check your computer's system information to see if you need an x86 (32-bit) or x64 (64-bit) version of the software, and then contact the software publisher. [ERROR_EXE_MACHINE_TYPE_MISMATCH (0xD8)] |
| Error code 217 | Image file %1 is signed and cannot be modified. [ERROR_EXE_CANNOT_MODIFY_SIGNED_BINARY (0xD9)] |
| Error code 218 | The image file %1 is strongly signed and cannot be modified. [ERROR_EXE_CANNOT_MODIFY_STRONG_SIGNED_BINARY (0xDA)] |
| Error code 220 | This file has been checked out or locked for editing by another user. [ERROR_FILE_CHECKED_OUT (0xDC)] |
| Error code 221 | The file must be checked out before saving changes. [ERROR_CHECKOUT_REQUIRED (0xDD)] |
| Error code 222 | The file type being saved or recovered is blocked. [ERROR_BAD_FILE_TYPE (0xDE)] |
| Error code 223 | The file size exceeds the allowed limit and cannot be saved. [ERROR_FILE_TOO_LARGE (0xDF)] |
| Error code 224 | Rejected. Before opening files from this site, you must first add the website to your list of trusted sites, browse to the website, and select the option to log in automatically. [ERROR_FORMS_AUTH_REQUIRED (0xE0)] |
| Error code 225 | The operation did not complete successfully because the file contains a virus. [ERROR_VIRUS_INFECTED (0xE1)] |
| Error code 226 | This file contains a virus and cannot be opened. Due to the nature of this virus, the file has been removed from this location. [ERROR_VIRUS_DELETED (0xE2)] |
| Error code 229 | The pipe is local. [ERROR_PIPE_LOCAL (0xE5)] |
| Error code 230 | Invalid pipe status. [ERROR_BAD_PIPE (0xE6)] |
| Error code 231 | All pipe instances are busy. [ERROR_PIPE_BUSY (0xE7)] |
| Error code 232 | Pipes are closed. [ERROR_NO_DATA (0xE8)] |
| Error code 233 | There is no process on the other end of the pipe. [ERROR_PIPE_NOT_CONNECTED (0xE9)] |
| Error code 234 | More data is available. [ERROR_MORE_DATA (0xEA)] |
| Error code 240 | Session cancelled. [ERROR_VC_DISCONNECTED (0xF0)] |
| Error code 254 | The specified extended attribute name is invalid. [ERROR_INVALID_EA_NAME (0xFE)] |
| Error code 255 | Extended attributes are inconsistent. [ERROR_EA_LIST_INCONSISTENT (0xFF)] |
| Error code 258 | The waiting process timed out. [WAIT_TIMEOUT (0x102)] |
| Error code 259 | No more data available. [ERROR_NO_MORE_ITEMS (0x103)] |
| Error code 266 | The copy functions cannot be used. [ERROR_CANNOT_COPY (0x10A)] |
| Error code 267 | Invalid directory name. [ERROR_DIRECTORY (0x10B)] |
| Error code 275 | Extended attributes were not contained in the buffer. [ERROR_EAS_DIDNT_FIT (0x113)] |
| Error code 276 | The extended attribute file on the mounted file system is corrupted. [ERROR_EA_FILE_CORRUPT (0x114)] |
| Error code 277 | The extended attribute table file is full. [ERROR_EA_TABLE_FULL (0x115)] |
| Error code 278 | The specified attribute extension handle is invalid. [ERROR_INVALID_EA_HANDLE (0x116)] |
| Error code 282 | The mounted file system does not support extended attributes. [ERROR_EAS_NOT_SUPPORTED (0x11A)] |
| Error code 288 | Attempt to free a mutex not owned by the caller. [ERROR_NOT_OWNER (0x120)] |
| Error code 298 | Also submitted many posts on the signal. [ERROR_TOO_MANY_POSTS (0x12A)] |
| Error code 299 | Only part of the ReadProcessMemory or WriteProcessMemory request was completed. [ERROR_PARTIAL_COPY (0x12B)] |
| Error code 300 | The oplock request was rejected. [ERROR_OPLOCK_NOT_GRANTED (0x12C)] |
| Error code 301 | An invalid unlock acknowledgment was received by the system. [ERROR_INVALID_OPLOCK_PROTOCOL (0x12D)] |
| Error code 302 | The volume is too fragmented to complete this operation. [ERROR_DISK_TOO_FRAGMENTED (0x12E)] |
| Error code 303 | The file cannot be opened because it is being deleted. [ERROR_DELETE_PENDING (0x12F)] |
| Error code 317 | The system cannot find the message text for message number 0x%1 in the message file for %2. [ERROR_MR_MID_NOT_FOUND (0x13D)] |
| Error code 318 | The specified scope was not found. [ERROR_SCOPE_NOT_FOUND (0x13E)] |
| Error code 350 | No action was taken as a system reboot is required. [ERROR_FAIL_NOACTION_REBOOT (0x15E)] |
| Error code 351 | Shutdown failed. [ERROR_FAIL_SHUTDOWN (0x15F)] |
| Error code 352 | The restart failed. [ERROR_FAIL_RESTART (0x160)] |
| Error code 353 | The maximum number of sessions has been reached. [ERROR_MAX_SESSIONS_REACHED (0x161)] |
| Error code 400 | The thread is already in background processing mode. [ERROR_THREAD_MODE_ALREADY_BACKGROUND (0x190)] |
| Error code 401 | The thread is not in background processing mode. [ERROR_THREAD_MODE_NOT_BACKGROUND (0x191)] |
| Error code 402 | The process is already in background processing mode. [ERROR_PROCESS_MODE_ALREADY_BACKGROUND (0x192)] |
| Error code 403 | The process is not in background processing mode. [ERROR_PROCESS_MODE_NOT_BACKGROUND (0x193)] |
| Error code 487 | Invalid access attempt |
| Address. [ERROR_INVALID_ADDRESS (0x1E7)] | |
| Error code 500 | The user profile could not be loaded. [ERROR_USER_PROFILE_LOAD (0x1F4)] |
| Error code 534 | The arithmetic result exceeded 32 bits. [ERROR_ARITHMETIC_OVERFLOW (0x216)] |
| Error code 535 | There is a process on the other end of the pipe. [ERROR_PIPE_CONNECTED (0x217)] |
| Error code 536 | Waiting for the other end of the pipe to open. [ERROR_PIPE_LISTENING (0x218)] |
| Error code 537 | The application verifier found an error in the current process. [ERROR_VERIFIER_STOP (0x219)] |
| Error code 538 | An error occurred in the ABIOS subsystem. [ERROR_ABIOS_ERROR (0x21A)] |
| Error code 539 | A warning occurred in the WX86 subsystem. [ERROR_WX86_WARNING (0x21B)] |
| Error code 540 | An error occurred in the WX86 subsystem. [ERROR_WX86_ERROR (0x21C)] |
| Error code 541 | An attempt was made to cancel or set a timer that has an associated APC and the thread in question was not the thread that originally set the timer using an associated APC procedure. [ERROR_TIMER_NOT_CANCELED (0x21D)] |
| Error code 542 | Unwind exception code. [ERROR_UNWIND (0x21E)] |
| Error code 543 | An invalid or misaligned stack was encountered during a rollback operation. [ERROR_BAD_STACK (0x21F)] |
| Error code 544 | An invalid unwind target was encountered during the unwind operation. [ERROR_INVALID_UNWIND_TARGET (0x220)] |
| Error code 545 | Invalid object attributes were specified for NtCreatePort or invalid port attributes were specified for NtConnectPort [ERROR_INVALID_PORT_ATTRIBUTES (0x221)] |
| Error code 546 | The message length passed to NtRequestPort or NtRequestWaitReplyPort was longer than the maximum message length allowed by the port. [ERROR_PORT_MESSAGE_TOO_LONG (0x222)] |
| Error code 547 | An attempt was made to lower the quota limit below the current usage. [ERROR_INVALID_QUOTA_LOWER (0x223)] |
| Error code 548 | An attempt was made to connect to a device that is already connected to another device. [ERROR_DEVICE_ALREADY_ATTACHED (0x224)] |
| Error code 549 | An attempt was made to execute an instruction at a misaligned address, and the host system does not support misaligned instruction references. [ERROR_INSTRUCTION_MISALIGNMENT (0x225)] |
| Error code 550 | Profiling did not start. [ERROR_PROFILING_NOT_STARTED (0x226)] |
| Error code 551 | Profiling not stopped. [ERROR_PROFILING_NOT_STOPPED (0x227)] |
| Error code 552 | The ACL passed does not contain the minimum required information. [ERROR_COULD_NOT_INTERPRET (0x228)] |
| Error code 553 | The number of active profile objects has reached the maximum and no more can be started. [ERROR_PROFILING_AT_LIMIT (0x229)] |
| Error code 554 | Used to indicate that a process cannot continue without blocking I/O. [ERROR_CANT_WAIT (0x22A)] |
| Error code 555 | Indicates that a thread attempted to terminate itself by default (called NtTerminateThread with NULL) and was the last thread in the current process. [ERROR_CANT_TERMINATE_SELF (0x22B)] |
| Error code 556 | If an MM error is returned that is not defined in the standard FsRtl filter [ERROR_UNEXPECTED_MM_CREATE_ERR (0x22C)] |
| Error code 557 | If an MM error is returned that is not defined in the standard FsRtl filter [ERROR_UNEXPECTED_MM_MAP_ERROR (0x22D)] |
| Error code 558 | If an MM error is displayed that is not specified in the standard FsRtl filter [ERROR_UNEXPECTED_MM_EXTEND_ERR (0x22E)] |
| Error code 559 | A corrupted function table was encountered during a decompilation operation. [ERROR_BAD_FUNCTION_TABLE (0x22F)] |
| Error code 560 | Indicates that an attempt was made to set protection for a file system file or directory and one of the security identifiers (SIDs) in the security descriptor could not be translated into a GUID that could be stored by the file system. This results in a failed protection attempt [ERROR_NO_GUID_TRANSLATION (0x230)] |
| Error code 561 | Indicates that an attempt was made to increase the LDT by setting its size [ERROR_INVALID_LDT_SIZE (0x231)] |
| Error code 563 | Indicates that the starting value of the LDT information was not an integral multiple of the size of the selector. [ERROR_INVALID_LDT_OFFSET (0x233)] |
| Error code 564 | Indicates that the user provided an invalid descriptor when trying to set Ldt descriptors. [ERROR_INVALID_LDT_DESCRIPTOR (0x234)] |
| Error code 565 | Indicates that the process has too many threads to perform the requested action. For example, [ERROR_TOO_MANY_THREADS (0x235)] |
| Error code 566 | An attempt was made to operate on a thread within a specific process [ERROR_THREAD_NOT_IN_PROCESS (0x236)] |
| Error code 567 | Page file quota exceeded. [ERROR_PAGEFILE_QUOTA_EXCEEDED (0x237)] |
| Error code 568 | The Netlogon service cannot be started because another Netlogon service running in the domain conflicts with the specified role. [ERROR_LOGON_SERVER_CONFLICT (0x238)] |
| Error code 569 | The SAM database on the Windows Server is significantly out of sync with the copy on the domain controller. A full synchronization is required. [ERROR_SYNCHRONIZATION_REQUIRED (0x239)] |
| Error code 570 | The NtCreateFile API failed. This error should never be returned to an application [ERROR_NET_OPEN_FAILED (0x23A)] |
| Error code 571 | {Privilege Failure} The I/O permissions for the process could not be changed. [ERROR_IO_PRIVILEGE_FAILED (0x23B)] |
| Error code 572 | {Application Exit by CTRL+C} The application was terminated as a result of pressing CTRL+C. [ERROR_CONTROL_C_EXIT (0x23C)] |
| Error code 573 | {System file missing} The required system file %hs is corrupted or missing. [ERROR_MISSING_SYSTEMFILE (0x23D)] |
| Error code 574 | {Application Error} The exception %s (0x%08lx) occurred in the application at location 0x%08lx. [ERROR_UNHANDLED_EXCEPTION (0x23E)] |
| Error code 575 | {Application Error} The application failed to initialize properly (0x%lx). Click OK to terminate the application. [ERROR_APP_INIT_FAILURE (0x23F)] |
| Error code 576 | {Unable to create paging file} Failed to create paging file %hs (%lx). The requested size is %ld. [ERROR_PAGEFILE_CREATE_FAILED (0x240)] |
| Error code 577 | Windows cannot verify the digital signature for this file. The file may have been installed incorrectly signed or corrupted due to a recent hardware or software change [ERROR_INVALID_IMAGE_HASH (0x241)] |
| Error code 578 | {No paging file specified} No paging file is specified in the system configuration. [ERROR_NO_PAGEFILE (0x242)] |
| Error code 579 | {Exception} The real mode application issued a floating-point instruction and the floating-point devices are not present. [ERROR_ILLEGAL_FLOAT_CONTEXT (0x243)] |
| Error code 580 | An event pair synchronization operation was performed using a client/server pair event object assigned to the thread [ERROR_NO_EVENT_PAIR (0x244)] |
| Error code 581 | The Windows server has an incorrect configuration. [ERROR_DOMAIN_CTRLR_CONFIG_ERROR (0x245)] |
| Error code 582 | An illegal character was encountered. For a multi-byte character set, this includes the lead byte with no trailing byte. For a Unicode character set, this includes the characters 0xFFFF and 0xFFFE. [ERROR_ILLEGAL_CHARACTER (0x246)] |
| Error code 583 | The Unicode character is not defined in the Unicode character set installed on the system. [ERROR_UNDEFINED_CHARACTER (0x247)] |
| Error code 584 | The paging file cannot be created on a floppy disk. [ERROR_FLOPPY_VOLUME (0x248)] |
| Error code 585 | The system BIOS failed to connect a system interrupt to the device or bus to which the device is connected. [ERROR_BIOS_FAILED_TO_CONNECT_INTERRUPT (0x249)] |
| Error code 586 | This operation is only allowed for the primary domain controller of the domain. [ERROR_BACKUP_CONTROLLER (0x24A)] |
| Error code 587 | An attempt was made to acquire a mutant whose maximum number was exceeded. [ERROR_MUTANT_LIMIT_EXCEEDED (0x24B)] |
| Error code 588 | A volume has been accessed that requires a file system driver that is not yet mounted. [ERROR_FS_DRIVER_REQUIRED (0x24C)] |
| Error code 589 | {Registration file failed} The registry cannot load the cell (file) |
| Error code 590 | {Unexpected failure in DebugActiveProcess} An unexpected failure occurred while processing the DebugActiveProcess API request. You can choose OK to terminate the process [ERROR_DEBUG_ATTACH_FAILED (0x24E)] |
| Error code 591 | {Fatal System Error} The system process %hs terminated unexpectedly with status 0x%08x (0x%08x 0x%08x). The system has been shut down. [ERROR_SYSTEM_PROCESS_TERMINATED (0x24F)] |
| Error code 592 | {Data not accepted} The TDI client could not process data received during the signal. [ERROR_DATA_NOT_ACCEPTED (0x250)] |
| Error code 593 | NTVDM encountered a fatal error. [ERROR_VDM_HARD_ERROR (0x251)] |
| Error code 594 | {Cancel Timeout} Driver %hs failed to complete a canceled I/O request within the allotted time. [ERROR_DRIVER_CANCEL_TIMEOUT (0x252)] |
| Error code 595 | {Reply Message Mismatch} An attempt was made to reply to an LPC message [ERROR_REPLY_MESSAGE_MISMATCH (0x253)] |
| Error code 596 | {Delayed write operation failed} Windows could not save all data for the file %hs. Data was lost. This error may be caused by a hardware or network connection failure. Please try saving this file elsewhere. [ERROR_LOST_WRITEBEHIND_DATA (0x254)] |
| Error code 597 | The parameters passed to the server in the client/server shared memory window are invalid. Too much data may have been placed in the shared memory window. [ERROR_CLIENT_SERVER_PARAMETERS_INVALID (0x255)] |
| Error code 598 | The stream is not a small stream. [ERROR_NOT_TINY_STREAM (0x256)] |
| Error code 599 | The request must be handled with a stack overflow code. [ERROR_STACK_OVERFLOW_READ (0x257)] |
| Error code 600 | Internal OFS status codes indicate how the allocation operation is handled. Either a retry occurs after the containing onode is moved or the extent stream is converted to a large stream. [ERROR_CONVERT_TO_LARGE (0x258)] |
| Error code 601 | An attempt to find the object found an object matching the ID on the volume but outside the scope of the handle used for the operation. [ERROR_FOUND_OUT_OF_SCOPE (0x259)] |
| Error code 602 | The bucket group must grow. Try again after doing this. [ERROR_ALLOCATE_BUCKET (0x25A)] |
| Error code 603 | User/kernel marshalling buffer overflow. [ERROR_MARSHALL_OVERFLOW (0x25B)] |
| Error code 604 | The provided variable structure contains invalid data. [ERROR_INVALID_VARIANT (0x25C)] |
| Error code 605 | The specified buffer contains invalid data. [ERROR_BAD_COMPRESSION_BUFFER (0x25D)] |
| Error code 606 | {Audit Failed} An attempt to create a security audit failed. [ERROR_AUDIT_FAILED (0x25E)] |
| Error code 607 | The timer resolution has not been preset by the current process. [ERROR_TIMER_RESOLUTION_NOT_SET (0x25F)] |
| Error code 608 | There is not enough account information to log you in. [ERROR_INSUFFICIENT_LOGON_INFO (0x260)] |
| Error code 609 | {Invalid DLL entry point} The dynamic link library %hs was not written correctly. The stack pointer was left in an inconsistent state. The entry point must be declared as WINAPI or STDCALL. Select "Yes" to fail to load the DLL. Select "No" to continue execution. Selecting "No" may cause the application to start incorrectly. [ERROR_BAD_DLL_ENTRYPOINT (0x261)] |
| Error code 610 | {Invalid Service Callback Entry} The %hs service was not written correctly. The stack pointer was left in an inconsistent state. The callback entry point must be declared as WINAPI or STDCALL. Selecting OK will cause the service to continue. But [ERROR_BAD_SERVICE_ENTRYPOINT (0x262)] |
| Error code 611 | There is an IP address conflict with another system on the network [ERROR_IP_ADDRESS_CONFLICT1 (0x263)] |
| Error code 612 | There is an IP address conflict with another system on the network [ERROR_IP_ADDRESS_CONFLICT2 (0x264)] |
| Error code 613 | {Low On Registry Space} The system has reached the maximum allowable size for the system portion of the registry. Additional storage requests will be ignored. [ERROR_REGISTRY_QUOTA_LIMIT (0x265)] |
| Error code 614 | The callback system service cannot be executed if there is no active callback. [ERROR_NO_CALLBACK_ACTIVE (0x266)] |
| Error code 615 | The password provided is too short to meet your user account policy. Please choose a longer password. [ERROR_PWD_TOO_SHORT (0x267)] |
| Error code 616 | Your user account policy doesn't allow you to change passwords too often. This is done to prevent users from changing passwords again to the usual [ERROR_PWD_TOO_RECENT (0x268)] |
| Error code 617 | You tried to change your password to one you have used in the past. Your user account policy does not allow this. Please select a password you have not used before. [ERROR_PWD_HISTORY_CONFLICT (0x269)] |
| Error code 618 | The specified compression format is not supported. [ERROR_UNSUPPORTED_COMPRESSION (0x26A)] |
| Error code 619 | The specified device profile configuration is invalid. [ERROR_INVALID_HW_PROFILE (0x26B)] |
| Error code 620 | The specified Plug and Play recording device path is invalid. [ERROR_INVALID_PLUGPLAY_DEVICE_PATH (0x26C)] |
| Error code 621 | The specified quota list is internally inconsistent with its descriptor. [ERROR_QUOTA_LIST_INCONSISTENT (0x26D)] |
| Error code 622 | {Windows Evaluation Notice} The evaluation period for this Windows installation has expired. This system will shut down in one hour. To restore access to this Windows installation [ERROR_EVALUATION_EXPIRATION (0x26E)] |
| Error code 623 | {Illegal System DLL Relocation} The system DLL %hs has been relocated in memory. The application will not run correctly. The relocation occurred because the DLL %hs occupied an address range reserved for Windows system DLLs. The vendor that provides the DLL must be contacted to obtain a new one. [ERROR_ILLEGAL_DLL_RELOCATION (0x26F)] |
| Error code 624 | {DLL Initialization Failure} The application failed to initialize because the window terminal was shut down. [ERROR_DLL_INIT_FAILED_LOGOFF (0x270)] |
| Error code 625 | The validation process needs to continue to the next step. [ERROR_VALIDATE_CONTINUE (0x271)] |
| Error code 626 | There are no more matches for the current index count. [ERROR_NO_MORE_MATCHES (0x272)] |
| Error code 627 | The range could not be added to the range list due to a conflict. [ERROR_RANGE_LIST_CONFLICT (0x273)] |
| Error code 628 | The server process is running under a different security identifier (SID) than the one requested by the client. [ERROR_SERVER_SID_MISMATCH (0x274)] |
| Error code 629 | A group marked for use as deny-only cannot be enabled. [ERROR_CANT_ENABLE_DENY_ONLY (0x275)] |
| Error code 630 | {Exception} Multiple floating-point errors. [ERROR_FLOAT_MULTIPLE_FAULTS (0x276)] |
| Error code 631 | {Exception} Multiple floating-point intercepts. [ERROR_FLOAT_MULTIPLE_TRAPS (0x277)] |
| Error code 632 | The requested interface is not supported. [ERROR_NOINTERFACE (0x278)] |
| Error code 633 | {System Standby Failed} The driver %hs does not support standby. Updating this driver might allow the system to go into standby. [ERROR_DRIVER_FAILED_SLEEP (0x279)] |
| Error code 634 | The system file %1 was corrupted and replaced. [ERROR_CORRUPT_SYSTEM_FILE (0x27A)] |
| Error code 635 | {Minimum virtual memory too low} Virtual memory is low on your system. Windows is increasing the size of the virtual memory paging file. During this process [ERROR_COMMITMENT_MINIMUM (0x27B)] |
| Error code 636 | A device has been removed so the enumeration must be restarted. [ERROR_PNP_RESTART_ENUMERATION (0x27C)] |
| Error code 637 | {Fatal System Error} The system image %s was not signed correctly. The file was replaced with the signed file. The system has been shut down. [ERROR_SYSTEM_IMAGE_BAD_SIGNATURE (0x27D)] |
| Error code 638 | The device will not start without rebooting. [ERROR_PNP_REBOOT_REQUIRED (0x27E)] |
| Error code 639 | There is not enough power to complete the requested operation. [ERROR_INSUFFICIENT_POWER (0x27F)] |
| Error code 640 | ERROR_MULTIPLE_FAULT_VIOLATION [ERROR_MULTIPLE_FAULT_VIOLATION (0x280)] |
| Error code 641 | The system is shutting down. [ERROR_SYSTEM_SHUTDOWN (0x281)] |
| Error code 642 | An attempt was made to remove DebugPort processes [ERROR_PORT_NOT_SET (0x282)] |
| Error code 643 | This version of Windows is incompatible with the directory group behavior version [ERROR_DS_VERSION_CHECK_FAILURE (0x283)] |
| Error code 644 | The specified range cannot be found in the range list. [ERROR_RANGE_NOT_FOUND (0x284)] |
| Error code 646 | The driver did not load because the system is booting in safe mode. [ERROR_NOT_SAFE_MODE_DRIVER (0x286)] |
| Error code 647 | The driver did not load because it failed to call initialization. [ERROR_FAILED_DRIVER_ENTRY (0x287)] |
| Error code 648 | "%hs" encountered an error while applying power or reading the device configuration. This could be due to a device failure or a poor connection. [ERROR_DEVICE_ENUMERATION_ERROR (0x288)] |
| Error code 649 | The creation operation failed because the name contains at least one mount point that resides in a volume to which the specified device object is not attached. [ERROR_MOUNT_POINT_NOT_RESOLVED (0x289)] |
| Error code 650 | The device object parameter is either not a valid device object or is not attached to the volume specified by the file name. [ERROR_INVALID_DEVICE_OBJECT_PARAMETER (0x28A)] |
| Error code 651 | A device scan error occurred. Please check the system event log for additional information. [ERROR_MCA_OCCURED (0x28B)] |
| Error code 652 | An error occurred [%2] while processing the driver database. [ERROR_DRIVER_DATABASE_ERROR (0x28C)] |
| Error code 653 | The system hive size exceeded the allowed limit. [ERROR_SYSTEM_HIVE_TOO_LARGE (0x28D)] |
| Error code 654 | The driver could not be loaded because a previous version of the driver is still in memory. [ERROR_DRIVER_FAILED_PRIOR_UNLOAD (0x28E)] |
| Error code 655 | {Volume Shadow Copy Service} Please wait while the Volume Shadow Copy Service prepares volume %hs for hibernation. [ERROR_VOLSNAP_PREPARE_HIBERNATE (0x28F)] |
| Error code 656 | The system failed to hibernate (error code is %hs). Hibernation will be disabled until the system is restarted. [ERROR_HIBERNATION_FAILURE (0x290)] |
| Error code 665 | The requested operation could not be completed due to file system limitations [ERROR_FILE_SYSTEM_LIMITATION (0x299)] |
| Error code 668 | An assertion failure occurred. [ERROR_ASSERTION_FAILURE (0x29C)] |
| Error code 669 | An error occurred in the ACPI subsystem. [ERROR_ACPI_ERROR (0x29D)] |
| Error code 670 | Assertion error. [ERROR_WOW_ASSERTION (0x29E)] |
| Error code 671 | A device is missing from the system BIOS MPS table. This device will not be used. Please contact your system vendor to update the system BIOS. [ERROR_PNP_BAD_MPS_TABLE (0x29F)] |
| Error code 672 | Translator failed to translate resources. [ERROR_PNP_TRANSLATION_FAILED (0x2A0)] |
| Error code 673 | The IRQ translator failed to translate resources. [ERROR_PNP_IRQ_TRANSLATION_FAILED (0x2A1)] |
| Error code 674 | Driver %2 returned an invalid ID for a child device (%3). [ERROR_PNP_INVALID_ID (0x2A2)] |
| Error code 675 | {Kernel Debugger Awakened} The system debugger was activated due to an interrupt. [ERROR_WAKE_SYSTEM_DEBUGGER (0x2A3)] |
| Error code 676 | {Handles Closed} The object handles were automatically closed as a result of the requested operation. [ERROR_HANDLES_CLOSED (0x2A4)] |
| Error code 677 | {Too much information} The specified access control list (ACL) contained more information than expected. [ERROR_EXTRANEOUS_INFORMATION (0x2A5)] |
| Error code 678 | This warning level status indicates that the transaction status already exists for the registry subtree [ERROR_RXACT_COMMIT_NECESSARY (0x2A6)] |
| Error code 679 | {Media changed} The media may have changed. [ERROR_MEDIA_CHECK (0x2A7)] |
| Error code 680 | {GUID Substitution} occurred while translating a Global Identifier (GUID) to a Windows Security Identifier (SID) [ERROR_GUID_SUBSTITUTION_MADE (0x2A8)] |
| Error code 681 | The build process stopped after reaching a symbolic link [ERROR_STOPPED_ON_SYMLINK (0x2A9)] |
| Error code 682 | A long jump was executed. [ERROR_LONGJUMP (0x2AA)] |
| Error code 683 | The Plug and Play query was unsuccessful. [ERROR_PLUGPLAY_QUERY_VETOED (0x2AB)] |
| Error code 684 | Frame merging has been performed. [ERROR_UNWIND_CONSOLIDATE (0x2AC)] |
| Error code 685 | Registry Hive Recovered (file) |
| Error code 686 | The application is attempting to run executable code from module %hs. This might be unsafe. Alternative [ERROR_DLL_MIGHT_BE_INSECURE (0x2AE)] |
| Error code 687 | The application is loading executable code from the %hs module. This is safe [ERROR_DLL_MIGHT_BE_INCOMPATIBLE (0x2AF)] |
| Error code 688 | The debugger did not handle the exception. [ERROR_DBG_EXCEPTION_NOT_HANDLED (0x2B0)] |
| Error code 689 | The corrector will reply later. [ERROR_DBG_REPLY_LATER (0x2B1)] |
| Error code 690 | The debugger cannot provide a handle. [ERROR_DBG_UNABLE_TO_PROVIDE_HANDLE (0x2B2)] |
| Error code 691 | The debugger terminated the thread. [ERROR_DBG_TERMINATE_THREAD (0x2B3)] |
| Error code 692 | The debugger terminated the process. [ERROR_DBG_TERMINATE_PROCESS (0x2B4)] |
| Error code 693 | The debugger obtained control C. [ERROR_DBG_CONTROL_C (0x2B5)] |
| Error code 694 | The debugger printed an exception on control C. [ERROR_DBG_PRINTEXCEPTION_C (0x2B6)] |
| Error code 695 | The debugger received a RIP exception. [ERROR_DBG_RIPEXCEPTION (0x2B7)] |
| Error code 696 | The debugger received a control break. [ERROR_DBG_CONTROL_BREAK (0x2B8)] |
| Error code 697 | Debugger command connection exception. [ERROR_DBG_COMMAND_EXCEPTION (0x2B9)] |
| Error code 698 | {Object Exists} An attempt was made to create an object and the object name already exists. [ERROR_OBJECT_NAME_EXISTS (0x2BA)] |
| Error code 699 | {Thread suspended} A thread termination occurred while it was suspended. The thread has been resumed [ERROR_THREAD_WAS_SUSPENDED (0x2BB)] |
| Error code 700 | {Image Relocated} An image file could not be relocated to the address specified in the image file. Local repairs must be made to this image. [ERROR_IMAGE_NOT_AT_BASE (0x2BC)] |
| Error code 701 | This information level status indicates that the transaction state for the specified registry subtree does not yet exist and must be created. [ERROR_RXACT_STATE_CREATED (0x2BD)] |
| Error code 702 | {Segment Load} A virtual DOS machine (VDM) is being loaded [ERROR_SEGMENT_NOTIFICATION (0x2BE)] |
| Error code 703 | {The current directory is invalid} The process cannot switch to the current startup directory %hs. Select OK to set the current directory to %hs [ERROR_BAD_CURRENT_DIRECTORY (0x2BF)] |
| Error code 704 | {Duplicate read} to fulfill a read request [ERROR_FT_READ_RECOVERY_FROM_BACKUP (0x2C0)] |
| Error code 705 | {Duplicate write} to fulfill write request [ERROR_FT_WRITE_RECOVERY (0x2C1)] |
| Error code 706 | {Device Type Mismatch} Image file %hs is invalid [ERROR_IMAGE_MACHINE_TYPE_MISMATCH (0x2C2)] |
| Error code 707 | {Partial data received} The network transmission returned partial data to the client. The remaining data will be sent later. [ERROR_RECEIVE_PARTIAL (0x2C3)] |
| Error code 708 | {Expedited Data Received} The network transport returned data to the client that was marked as expedited by the remote system. [ERROR_RECEIVE_EXPEDITED (0x2C4)] |
| Error code 709 | {Partial accelerated data received} The network transmission returned partial data to the client, and this data was marked as accelerated by the remote system. The remaining data will be sent later. [ERROR_RECEIVE_PARTIAL_EXPEDITED (0x2C5)] |
| Error code 710 | {TDI event completed} The TDI completed successfully. [ERROR_EVENT_DONE (0x2C6)] |
| Error code 711 | {TDI Event Pending} The TDI has entered the Pending state. [ERROR_EVENT_PENDING (0x2C7)] |
| Error code 712 | Checking file system on %wZ [ERROR_CHECKING_FILE_SYSTEM (0x2C8)] |
| Error code 713 | {FATAL APP EXIT} %hs [ERROR_FATAL_APP_EXIT (0x2C9)] |
| Error code 714 | The specified registry key is referenced by a predefined handle. [ERROR_PREDEFINED_HANDLE (0x2CA)] |
| Error code 715 | {Page Unlocked} The locked page protection has been changed to "Access Forbidden" and the page has been unlocked from memory and from the process. [ERROR_WAS_UNLOCKED (0x2CB)] |
| Error code 716 | %hs [ERROR_SERVICE_NOTIFICATION (0x2CC)] |
| Error code 717 | {Page Locked} One of the pages to be locked is already locked. [ERROR_WAS_LOCKED (0x2CD)] |
| Error code 718 | Application pop-up window |
| Error code 719 | ERROR_ALREADY_WIN32 [ERROR_ALREADY_WIN32 (0x2CF)] |
| Error code 720 | {Device Type Mismatch} Image file %hs is invalid [ERROR_IMAGE_MACHINE_TYPE_MISMATCH_EXE (0x2D0)] |
| Error code 721 | Yield execution was performed and no thread was available to run. [ERROR_NO_YIELD_PERFORMED (0x2D1)] |
| Error code 722 | The timer API resume flag was ignored. [ERROR_TIMER_RESUME_IGNORED (0x2D2)] |
| Error code 723 | The arbitration of these resources has been deferred to the parent company [ERROR_ARBITRATION_UNHANDLED (0x2D3)] |
| Error code 724 | The inserted CardBus device could not be started due to a configuration error on “%hs”. [ERROR_CARDBUS_NOT_SUPPORTED (0x2D4)] |
| Error code 725 | The CPUs in this multiprocessor system are not all at the same rev level. To use all the processors, the operating system limits itself to the least capable processor in the system. If problems occur with this system [ERROR_MP_PROCESSOR_MISMATCH (0x2D5)] |
| Error code 726 | The system has been put into hibernation mode. [ERROR_HIBERNATED (0x2D6)] |
| Error code 727 | The system has resumed from hibernation. [ERROR_RESUME_HIBERNATION (0x2D7)] |
| Error code 728 | Windows has detected that the system firmware (BIOS) has been updated [Previous firmware date = %2 [ERROR_FIRMWARE_UPDATED (0x2D8)] |
| Error code 729 | A device driver is leaking locked I/O pages, causing system degradation. The system has automatically enabled a trace code to try to catch the culprit. [ERROR_DRIVERS_LEAKING_LOCKED_PAGES (0x2D9)] |
| Error code 730 | System alert [ERROR_WAKE_SYSTEM (0x2DA)] |
| Error code 731 | ERROR_WAIT_1 [ERROR_WAIT_1 (0x2DB)] |
| Error code 732 | ERROR_WAIT_2 [ERROR_WAIT_2 (0x2DC)] |
| Error code 733 | ERROR_WAIT_3 [ERROR_WAIT_3 (0x2DD)] |
| Error code 734 | ERROR_WAIT_63 [ERROR_WAIT_63 (0x2DE)] |
| Error code 735 | ERROR_ABANDONED_WAIT_0 [ERROR_ABANDONED_WAIT_0 (0x2DF)] |
| Error code 736 | ERROR_ABANDONED_WAIT_63 [ERROR_ABANDONED_WAIT_63 (0x2E0)] |
| Error code 737 | ERROR_USER_APC [ERROR_USER_APC (0x2E1)] |
| Error code 738 | ERROR_KERNEL_APC [ERROR_KERNEL_APC (0x2E2)] |
| Error code 739 | ERROR_ALERTED [ERROR_ALERTED (0x2E3)] |
| Error code 740 | The requested operation requires elevation. [ERROR_ELEVATION_REQUIRED (0x2E4)] |
| Error code 741 | The object manager must perform reparse because the filename resulted in a symbolic link. [ERROR_REPARSE (0x2E5)] |
| Error code 742 | An open/create operation completed while an oplock break was in progress. [ERROR_OPLOCK_BREAK_IN_PROGRESS (0x2E6)] |
| Error code 743 | A new volume has been mounted by the file system. [ERROR_VOLUME_MOUNTED (0x2E7)] |
| Error code 744 | This success level status indicates that the transaction status already exists for the registry subtree [ERROR_RXACT_COMMITTED (0x2E8)] |
| Error code 745 | This indicates that the change notification request has completed because the identifier that made the change notification request has been closed. [ERROR_NOTIFY_CLEANUP (0x2E9)] |
| Error code 746 | {Connection Failed on Primary Transport} An attempt was made to connect to the remote server %hs on the primary transport [ERROR_PRIMARY_TRANSPORT_CONNECT_FAILED (0x2EA)] |
| Error code 747 | The page error occurred while transitioning. [ERROR_PAGE_FAULT_TRANSITION (0x2EB)] |
| Error code 748 | Page fault: The request error was zero. [ERROR_PAGE_FAULT_DEMAND_ZERO (0x2EC)] |
| Error code 749 | Page Fault The request error was zero. [ERROR_PAGE_FAULT_COPY_ON_WRITE (0x2ED)] |
| Error code 750 | Page Fault The request error was zero. [ERROR_PAGE_FAULT_GUARD_PAGE (0x2EE)] |
| Error code 751 | A page fault was met by reading from a secondary storage device. [ERROR_PAGE_FAULT_PAGING_FILE (0x2EF)] |
| Error code 752 | The cached page was locked during the operation. [ERROR_CACHE_PAGE_LOCKED (0x2F0)] |
| Error code 753 | Crash dump is in the paging file. [ERROR_CRASH_DUMP (0x2F1)] |
| Error code 754 | The specified buffer contains all zeros. [ERROR_BUFFER_ALL_ZEROS (0x2F2)] |
| Error code 755 | The object manager must perform reparse because the filename resulted in a symbolic link. [ERROR_REPARSE_OBJECT (0x2F3)] |
| Error code 756 | The device successfully stopped the query and its resource requirements changed. [ERROR_RESOURCE_REQUIREMENTS_CHANGED (0x2F4)] |
| Error code 757 | The translator has translated these resources into global space and no further translations should be performed. [ERROR_TRANSLATION_COMPLETE (0x2F5)] |
| Error code 758 | There are no threads to terminate the process being terminated. [ERROR_NOTHING_TO_TERMINATE (0x2F6)] |
| Error code 759 | The specified process is not part of the job. [ERROR_PROCESS_NOT_IN_JOB (0x2F7)] |
| Error code 760 | The specified process is part of a job. [ERROR_PROCESS_IN_JOB (0x2F8)] |
| Error code 761 | {Volume Shadow Copy Service} The system is now ready to hibernate. [ERROR_VOLSNAP_HIBERNATE_READY (0x2F9)] |
| Error code 762 | The file system driver or file system filter completed the FsFilter operation successfully. [ERROR_FSFILTER_OP_COMPLETED_SUCCESSFULLY (0x2FA)] |
| Error code 763 | The specified interrupt vector has already been connected. [ERROR_INTERRUPT_VECTOR_ALREADY_CONNECTED (0x2FB)] |
| Error code 764 | The specified interrupt vector is still connected. [ERROR_INTERRUPT_STILL_CONNECTED (0x2FC)] |
| Error code 765 | An operation waiting for an open has been blocked. [ERROR_WAIT_FOR_OPLOCK (0x2FD)] |
| Error code 766 | The debugger handled the exception [ERROR_DBG_EXCEPTION_HANDLED (0x2FE)] |
| Error code 767 | Debugger Continue [ERROR_DBG_CONTINUE (0x2FF)] |
| Error code 768 | An exception occurred in a user-mode callback and the kernel callback frame must be removed. [ERROR_CALLBACK_POP_STACK (0x300)] |
| Error code 769 | Compression is disabled for this volume. [ERROR_COMPRESSION_DISABLED (0x301)] |
| Error code 770 | The data provider cannot fetch back through the result set. [ERROR_CANTFETCHBACKWARDS (0x302)] |
| Error code 771 | The data provider cannot scroll back through the result set. [ERROR_CANTSCROLLBACKWARDS (0x303)] |
| Error code 772 | The data provider requires that previously fetched data be released before requesting more data. [ERROR_ROWSNOTRELEASED (0x304)] |
| Error code 773 | The data provider was unable to interpret the flag set for the column binding in the connector. [ERROR_BAD_ACCESSOR_FLAGS (0x305)] |
| Error code 774 | One or more errors occurred while processing the request. [ERROR_ERRORS_ENCOUNTERED (0x306)] |
| Error code 775 | The implementation is unable to execute the request. [ERROR_NOT_CAPABLE (0x307)] |
| Error code 776 | The component client requested an invalid operation due to the state of the component instance. [ERROR_REQUEST_OUT_OF_SEQUENCE (0x308)] |
| Error code 777 | The version number could not be parsed. [ERROR_VERSION_PARSE_ERROR (0x309)] |
| Error code 778 | The start position of the iterator is invalid. [ERROR_BADSTARTPOSITION (0x30A)] |
| Error code 779 | The device reported an uncorrectable memory error. [ERROR_MEMORY_HARDWARE (0x30B)] |
| Error code 780 | The operation you attempted required self-repair to be enabled. [ERROR_DISK_REPAIR_DISABLED (0x30C)] |
| Error code 781 | The desktop heap encountered an error allocating session memory. More information is available in the system event log. [ERROR_INSUFFICIENT_RESOURCE_FOR_SPECIFIED_SHARED_SECTION_SIZE (0x30D)] |
| Error code 782 | The system power state is going from %2 to %3. [ERROR_SYSTEM_POWERSTATE_TRANSITION (0x30E)] |
| Error code 783 | The system power state goes from %2 to %3 but can enter %4. [ERROR_SYSTEM_POWERSTATE_COMPLEX_TRANSITION (0x30F)] |
| Error code 784 | A topic is being sent with an MCA EXCEPTION due to an MCA. [ERROR_MCA_EXCEPTION (0x310)] |
| Error code 785 | Access to %1 is being monitored by policy rule %2. [ERROR_ACCESS_AUDIT_BY_POLICY (0x311)] |
| Error code 786 | Access to %1 has been restricted by the administrator via policy rule %2. [ERROR_ACCESS_DISABLED_NO_SAFER_UI_BY_POLICY (0x312)] |
| Error code 787 | A valid hibernation file has been invalidated and must be abandoned. [ERROR_ABANDON_HIBERFILE (0x313)] |
| Error code 788 | {Delayed write failed} Windows could not save all data for the file %hs; data was lost. This error may be caused by network connectivity problems. Please try saving this file elsewhere. [ERROR_LOST_WRITEBEHIND_DATA_NETWORK_DISCONNECTED (0x314)] |
| Error code 789 | {Delayed write operation failed} Windows could not save all data for the file %hs; the data was lost. This error was returned by the server on which the file resides. Please try saving this file elsewhere. [ERROR_LOST_WRITEBEHIND_DATA_NETWORK_SERVER_ERROR (0x315)] |
| Error code 790 | {Delayed write failed} Windows could not save all data for the file %hs; the data was lost. This error can occur if the device was removed or if the media is write-protected. [ERROR_LOST_WRITEBEHIND_DATA_LOCAL_DISK_ERROR (0x316)] |
| Error code 791 | The resources requested for this device conflict with the MCFG table. [ERROR_BAD_MCFG_TABLE (0x317)] |
| Error code 994 | Access to the long attribute was denied. [ERROR_EA_ACCESS_DENIED (0x3E2)] |
| Error code 995 | The I/O operation was aborted either due to a thread termination or an application request. [ERROR_OPERATION_ABORTED (0x3E3)] |
| Error code 996 | The overlapped I/O event is not in a signal state. [ERROR_IO_INCOMPLETE (0x3E4)] |
| Error code 997 | Overlapped I/O operation in progress. [ERROR_IO_PENDING (0x3E5)] |
| Error code 998 | Valid access to memory location. [ERROR_NOACCESS (0x3E6)] |
| Error code 999 | Error performing an operation on the page. [ERROR_SWAPERROR (0x3E7)] |
| Error code 1001 | The recursion is too deep; the stack overflowed. [ERROR_STACK_OVERFLOW (0x3E9)] |
| Error code 1002 | The window cannot operate on the sent message. [ERROR_INVALID_MESSAGE (0x3EA)] |
| Error code 1003 | This function cannot be completed. [ERROR_CAN_NOT_COMPLETE (0x3EB)] |
| Error code 1004 | Invalid flags. [ERROR_INVALID_FLAGS (0x3EC)] |
| Error code 1005 | It does not contain a recognized file system volume. Please ensure that all required file system drivers are loaded and the volume is not damaged. [ERROR_UNRECOGNIZED_VOLUME (0x3ED)] |
| Error code 1006 | The file storage unit has been externally modified so that the opened file is no longer valid. [ERROR_FILE_INVALID (0x3EE)] |
| Error code 1007 | The requested operation cannot be performed in full screen mode. [ERROR_FULLSCREEN_MODE (0x3EF)] |
| Error code 1008 | An attempt was made to reference a non-existent token. [ERROR_NO_TOKEN (0x3F0)] |
| Error code 1009 | The configuration log database is corrupted. [ERROR_BADDB (0x3F1)] |
| Error code 1010 | The configuration registry key is invalid. [ERROR_BADKEY (0x3F2)] |
| Error code 1011 | The configuration registry key could not be opened. [ERROR_CANTOPEN (0x3F3)] |
| Error code 1012 | The configuration registry key could not be read. [ERROR_CANTREAD (0x3F4)] |
| Error code 1013 | The configuration registry key could not be written. [ERROR_CANTWRITE (0x3F5)] |
| Error code 1014 | A file in the registry database had to be recovered using a registry or alternate copy. The recovery was successful. [ERROR_REGISTRY_RECOVERED (0x3F6)] |
| Error code 1015 | The registry is corrupted. The structure of a file containing registry data is corrupted, the system memory image of the file is damaged, or the file could not be recovered because a copy or a replacement registry was missing or corrupted. [ERROR_REGISTRY_CORRUPT (0x3F7)] |
| Error code 1016 | An I/O operation initiated by the registry failed irrecoverably. The registry could not read, write, or erase a file containing the system image for the registry. [ERROR_REGISTRY_IO_FAILED (0x3F8)] |
| Error code 1017 | The system attempted to load or restore a file to the registry, but the specified file is not in a registry file format. [ERROR_NOT_REGISTRY_FILE (0x3F9)] |
| Error code 1018 | An illegal operation was attempted on a registry key marked for deletion. [ERROR_KEY_DELETED (0x3FA)] |
| Error code 1019 | The system could not allocate the requested space in the logging log. [ERROR_NO_LOG_SPACE (0x3FB)] |
| Error code 1020 | A symbolic link cannot be created in a registry key that already contains values or subkeys. [ERROR_KEY_HAS_CHILDREN (0x3FC)] |
| Error code 1021 | A static subkey cannot be created under a volatile parent key. [ERROR_CHILD_MUST_BE_VOLATILE (0x3FD)] |
| Error code 1022 | The change notification request is now complete and no information will be returned to the requester's buffer. The caller now needs to enumerate the files to find the changes. [ERROR_NOTIFY_ENUM_DIR (0x3FE)] |
| Error code 1051 | A stop control was sent to a service that other running services depend on. [ERROR_DEPENDENT_SERVICES_RUNNING (0x41B)] |
| Error code 1052 | The requested control is invalid for this service. [ERROR_INVALID_SERVICE_CONTROL (0x41C)] |
| Error code 1053 | The service did not respond to the start or control request in a timely manner. [ERROR_SERVICE_REQUEST_TIMEOUT (0x41D)] |
| Error code 1054 | Unable to create a thread for the service. [ERROR_SERVICE_NO_THREAD (0x41E)] |
| Error code 1055 | The service database is locked. [ERROR_SERVICE_DATABASE_LOCKED (0x41F)] |
| Error code 1056 | The service instance is already running. [ERROR_SERVICE_ALREADY_RUNNING (0x420)] |
| Error code 1057 | The account name is invalid, does not exist, or the password is invalid for the specified account name. [ERROR_INVALID_SERVICE_ACCOUNT (0x421)] |
| Error code 1058 | The service cannot be started either because it is disabled or because it does not have enabled devices associated with it. [ERROR_SERVICE_DISABLED (0x422)] |
| Error code 1059 | A circular service dependency has been identified. [ERROR_CIRCULAR_DEPENDENCY (0x423)] |
| Error code 1060 | The specified service does not exist as an installed service. [ERROR_SERVICE_DOES_NOT_EXIST (0x424)] |
| Error code 1061 | The service cannot accept control messages at this time. [ERROR_SERVICE_CANNOT_ACCEPT_CTRL (0x425)] |
| Error code 1062 | The service has not started yet. [ERROR_SERVICE_NOT_ACTIVE (0x426)] |
| Error code 1063 | The service process could not connect to the service controller. [ERROR_FAILED_SERVICE_CONTROLLER_CONNECT (0x427)] |
| Error code 1064 | A service exception occurred while processing a control request. [ERROR_EXCEPTION_IN_SERVICE (0x428)] |
| Error code 1065 | The specified database does not exist. [ERROR_DATABASE_DOES_NOT_EXIST (0x429)] |
| Error code 1066 | The service returned a service-specific error code. [ERROR_SERVICE_SPECIFIC_ERROR (0x42A)] |
| Error code 1067 | The process terminated unexpectedly. [ERROR_PROCESS_ABORTED (0x42B)] |
| Error code 1068 | The dependency service or group failed to start. [ERROR_SERVICE_DEPENDENCY_FAIL (0x42C)] |
| Error code 1069 | The service did not start due to a login failure. [ERROR_SERVICE_LOGON_FAILED (0x42D)] |
| Error code 1070 | After starting the service, it is stuck in the start-up pending state. [ERROR_SERVICE_START_HANG (0x42E)] |
| Error code 1071 | The specified database security is unavailable. [ERROR_INVALID_SERVICE_LOCK (0x42F)] |
| Error code 1072 | The specified service has been marked for deletion. [ERROR_SERVICE_MARKED_FOR_DELETE (0x430)] |
| Error code 1073 | Predefined service. [ERROR_SERVICE_EXISTS (0x431)] |
| Error code 1074 | The system is currently running with the last known good configuration. [ERROR_ALREADY_RUNNING_LKG (0x432)] |
| Error code 1075 | The dependency service does not exist or has been marked for deletion. [ERROR_SERVICE_DEPENDENCY_DELETED (0x433)] |
| Error code 1076 | The current boot has already been accepted for use as the last known good control set. [ERROR_BOOT_ALREADY_ACCEPTED (0x434)] |
| Error code 1077 | No attempts have been made to start the service since the last boot. [ERROR_SERVICE_NEVER_STARTED (0x435)] |
| Error code 1078 | The name is already in use as a service name or service display name. [ERROR_DUPLICATE_SERVICE_NAME (0x436)] |
| Error code 1079 | The account specified for this service differs from the account specified for other services running in the same process. [ERROR_DIFFERENT_SERVICE_ACCOUNT (0x437)] |
| Error code 1080 | Failure actions can only be set for Win32 services, not drivers. [ERROR_CANNOT_DETECT_DRIVER_FAILURE (0x438)] |
| Error code 1081 | This service runs in the same process as the Service Control Manager. Therefore, the Service Control Manager cannot take action if this service's process terminates unexpectedly. [ERROR_CANNOT_DETECT_PROCESS_ABORT (0x439)] |
| Error code 1082 | No recovery program is configured for this service. [ERROR_NO_RECOVERY_PROGRAM (0x43A)] |
| Error code 1083 | The executable program in which this service is configured to run is not implementing the service. [ERROR_SERVICE_NOT_IN_EXE (0x43B)] |
| Error code 1084 | This service cannot be started in safe mode [ERROR_NOT_SAFEBOOT_SERVICE (0x43C)] |
| Error code 1100 | The physical end of the tape has been reached. [ERROR_END_OF_MEDIA (0x44C)] |
| Error code 1101 | The tape reached a file mark. [ERROR_FILEMARK_DETECTED (0x44D)] |
| Error code 1102 | The beginning of the tape or section was encountered. [ERROR_BEGINNING_OF_MEDIA (0x44E)] |
| Error code 1103 | The access bar has reached the end of a set of files. [ERROR_SETMARK_DETECTED (0x44F)] |
| Error code 1104 | There is no more data on the tape. [ERROR_NO_DATA_DETECTED (0x450)] |
| Error code 1105 | The tape cannot be partitioned. [ERROR_PARTITION_FAILURE (0x451)] |
| Error code 1106 | When accessing a new block of a multipartition partition, the current block size is incorrect. [ERROR_INVALID_BLOCK_LENGTH (0x452)] |
| Error code 1107 | The tape partition information could not be found when loading a tape. [ERROR_DEVICE_NOT_PARTITIONED (0x453)] |
| Error code 1108 | The media eject mechanism could not be locked. [ERROR_UNABLE_TO_LOCK_MEDIA (0x454)] |
| Error code 1109 | Unable to unload media. [ERROR_UNABLE_TO_UNLOAD_MEDIA (0x455)] |
| Error code 1110 | The media in the drive may have changed. [ERROR_MEDIA_CHANGED (0x456)] |
| Error code 1111 | The I/O bus has been reset. [ERROR_BUS_RESET (0x457)] |
| Error code 1112 | There is no media in the drive. [ERROR_NO_MEDIA_IN_DRIVE (0x458)] |
| Error code 1113 | No Unicode character mapping exists in the target multibyte code page. [ERROR_NO_UNICODE_TRANSLATION (0x459)] |
| Error code 1114 | The dynamic link library (DLL) initialization procedure failed. [ERROR_DLL_INIT_FAILED (0x45A)] |
| Error code 1115 | The system is shutting down. [ERROR_SHUTDOWN_IN_PROGRESS (0x45B)] |
| Error code 1116 | Unable to abort system shutdown because no shutdown is in progress. [ERROR_NO_SHUTDOWN_IN_PROGRESS (0x45C)] |
| Error code 1117 | The request could not be executed due to an I/O device error. [ERROR_IO_DEVICE (0x45D)] |
| Error code 1118 | No serial device was initialized successfully. The serial driver will be unpacked. [ERROR_SERIAL_NO_DEVICE (0x45E)] |
| Error code 1119 | A device sharing an interrupt request (IRQ) with other devices could not be opened. At least one other device using that IRQ has already been opened. [ERROR_IRQ_BUSY (0x45F)] |
| Error code 1120 | A serial I/O operation was completed by another write to the serial port. IOCTL_SERIAL_XOFF_COUNTER reached zero. [ERROR_MORE_WRITES (0x460)] |
| Error code 1121 | A serial I/O operation completed a timeout. IOCTL_SERIAL_XOFF_COUNTER did not reach zero. [ERROR_COUNTER_TIMEOUT (0x461)] |
| Error code 1122 | No ID address mark found on the floppy disk. [ERROR_FLOPPY_ID_MARK_NOT_FOUND (0x462)] |
| Error code 1123 | Mismatch between the floppy disk sector ID field and the floppy disk controller path address. [ERROR_FLOPPY_WRONG_CYLINDER (0x463)] |
| Error code 1124 | The floppy disk controller reported an error not recognized by the floppy disk driver. [ERROR_FLOPPY_UNKNOWN_ERROR (0x464)] |
| Error code 1125 | The floppy disk controller returned inconsistent results in its registers. [ERROR_FLOPPY_BAD_REGISTERS (0x465)] |
| Error code 1126 | While accessing the hard disk, the recalibration operation failed even after retrying. [ERROR_DISK_RECALIBRATE_FAILED (0x466)] |
| Error code 1127 | While accessing the hard disk, the disk operation failed even after retrying. [ERROR_DISK_OPERATION_FAILED (0x467)] |
| Error code 1128 | While accessing the hard disk, a disk controller reset was required but even that failed. [ERROR_DISK_RESET_FAILED (0x468)] |
| Error code 1129 | The physical end of the tape was encountered. [ERROR_EOM_OVERFLOW (0x469)] |
| Error code 1130 | There is not enough storage space available on the server to process this command. [ERROR_NOT_ENOUGH_SERVER_MEMORY (0x46A)] |
| Error code 1131 | A possible deadlock condition has been detected. [ERROR_POSSIBLE_DEADLOCK (0x46B)] |
| Error code 1132 | The specified base address or file offset does not have the correct alignment. [ERROR_MAPPED_ALIGNMENT (0x46C)] |
| Error code 1140 | An attempt to change the system power state was rejected by another application or driver. [ERROR_SET_POWER_STATE_VETOED (0x474)] |
| Error code 1141 | The system BIOS failed trying to change the system power state. [ERROR_SET_POWER_STATE_FAILED (0x475)] |
| Error code 1142 | An attempt was made to create more links on a file than the file system supports. [ERROR_TOO_MANY_LINKS (0x476)] |
| Error code 1150 | The specified program requires a newer version of Windows. [ERROR_OLD_WIN_VERSION (0x47E)] |
| Error code 1151 | The specified program is not a Windows or MS-DOS program. [ERROR_APP_WRONG_OS (0x47F)] |
| Error code 1152 | More than one instance of the specified program cannot be started. [ERROR_SINGLE_INSTANCE_APP (0x480)] |
| Error code 1153 | The specified program was written for an earlier version of Windows. [ERROR_RMODE_APP (0x481)] |
| Error code 1154 | One of the library files required to run this application is corrupted. [ERROR_INVALID_DLL (0x482)] |
| Error code 1155 | There is no application associated with the specified file for this operation. [ERROR_NO_ASSOCIATION (0x483)] |
| Error code 1156 | There was an error sending the command to the application. [ERROR_DDE_FAIL (0x484)] |
| Error code 1157 | One of the library files required to run this application could not be found. [ERROR_DLL_NOT_FOUND (0x485)] |
| Error code 1158 | The current process has used all system-allowed handles for Window Manager objects. [ERROR_NO_MORE_USER_HANDLES (0x486)] |
| Error code 1159 | The message can only be used with synchronous operations. [ERROR_MESSAGE_SYNC_ONLY (0x487)] |
| Error code 1160 | The referenced source element contains no media. [ERROR_SOURCE_ELEMENT_EMPTY (0x488)] |
| Error code 1161 | The indicated destination element already contains media. [ERROR_DESTINATION_ELEMENT_FULL (0x489)] |
| Error code 1162 | The indicated element does not exist. [ERROR_ILLEGAL_ELEMENT_ADDRESS (0x48A)] |
| Error code 1163 | The referenced item is part of a magazine that does not exist. [ERROR_MAGAZINE_NOT_PRESENT (0x48B)] |
| Error code 1164 | The indicated device requires reinitialization due to hardware errors. [ERROR_DEVICE_REINITIALIZATION_NEEDED (0x48C)] |
| Error code 1165 | The device has indicated that cleaning is required before attempting further operations. [ERROR_DEVICE_REQUIRES_CLEANING (0x48D)] |
| Error code 1166 | The device has indicated that its door is open. [ERROR_DEVICE_DOOR_OPEN (0x48E)] |
| Error code 1167 | The device is not connected. [ERROR_DEVICE_NOT_CONNECTED (0x48F)] |
| Error code 1168 | The item does not exist. [ERROR_NOT_FOUND (0x490)] |
| Error code 1169 | There is no match for the specified key in the index. [ERROR_NO_MATCH (0x491)] |
| Error code 1170 | The specified property set does not exist in the object. [ERROR_SET_NOT_FOUND (0x492)] |
| Error code 1171 | The point passed to GetMouseMovePoints is not in the buffer. [ERROR_POINT_NOT_FOUND (0x493)] |
| Error code 1172 | The tracking service (workstation) is not running. [ERROR_NO_TRACKING_SERVICE (0x494)] |
| Error code 1173 | The volume ID could not be found. [ERROR_NO_VOLUME_ID (0x495)] |
| Error code 1175 | The file to be replaced could not be removed. [ERROR_UNABLE_TO_REMOVE_REPLACED (0x497)] |
| Error code 1176 | The replacement file could not be moved to the file to be replaced. The file to be replaced kept its original name. [ERROR_UNABLE_TO_MOVE_REPLACEMENT (0x498)] |
| Error code 1177 | The replacement file could not be moved to the file to be replaced. The file to be replaced was renamed using the backup name. [ERROR_UNABLE_TO_MOVE_REPLACEMENT_2 (0x499)] |
| Error code 1178 | The resize journal is being deleted. [ERROR_JOURNAL_DELETE_IN_PROGRESS (0x49A)] |
| Error code 1179 | The resize journal is inactive. [ERROR_JOURNAL_NOT_ACTIVE (0x49B)] |
| Error code 1180 | A file was found but it might not be the correct file. [ERROR_POTENTIAL_FILE_FOUND (0x49C)] |
| Error code 1181 | The journal entry was deleted from the journal. [ERROR_JOURNAL_ENTRY_DELETED (0x49D)] |
| Error code 1190 | System shutdown is already scheduled. [ERROR_SHUTDOWN_IS_SCHEDULED (0x4A6)] |
| Error code 1191 | System shutdown cannot be initiated because other users are logged on to the computer. [ERROR_SHUTDOWN_USERS_LOGGED_ON (0x4A7)] |
| Error code 1200 | The specified device name is invalid. [ERROR_BAD_DEVICE (0x4B0)] |
| Error code 1201 | The device is currently offline but the connection is saved. [ERROR_CONNECTION_UNAVAIL (0x4B1)] |
| Error code 1202 | The local device name has a saved connection to another network resource. [ERROR_DEVICE_ALREADY_REMEMBERED (0x4B2)] |
| Error code 1203 | Either the network path you typed incorrectly does not exist or the network provider is currently unavailable. Please try retyping the path or contact your network administrator. [ERROR_NO_NET_OR_BAD_PATH (0x4B3)] |
| Error code 1204 | The specified network provider name is invalid. [ERROR_BAD_PROVIDER (0x4B4)] |
| Error code 1205 | Unable to open the network connection profile. [ERROR_CANNOT_OPEN_PROFILE (0x4B5)] |
| Error code 1206 | The network connection profile is corrupted. [ERROR_BAD_PROFILE (0x4B6)] |
| Error code 1207 | Cannot enumerate noncontainer. [ERROR_NOT_CONTAINER (0x4B7)] |
| Error code 1208 | An extended error occurred. [ERROR_EXTENDED_ERROR (0x4B8)] |
| Error code 1209 | The specified group name format is invalid. [ERROR_INVALID_GROUPNAME (0x4B9)] |
| Error code 1210 | The specified computer name format is invalid. [ERROR_INVALID_COMPUTERNAME (0x4BA)] |
| Error code 1211 | The specified event name format is invalid. [ERROR_INVALID_EVENTNAME (0x4BB)] |
| Error code 1212 | The specified domain name format is invalid. [ERROR_INVALID_DOMAINNAME (0x4BC)] |
| Error code 1213 | The specified service name format is invalid. [ERROR_INVALID_SERVICENAME (0x4BD)] |
| Error code 1214 | The specified network name is invalid. [ERROR_INVALID_NETNAME (0x4BE)] |
| Error code 1215 | The specified share name format is invalid. [ERROR_INVALID_SHARENAME (0x4BF)] |
| Error code 1216 | The specified password format is invalid. [ERROR_INVALID_PASSWORDNAME (0x4C0)] |
| Error code 1217 | The specified message name format is invalid. [ERROR_INVALID_MESSAGENAME (0x4C1)] |
| Error code 1218 | The specified message destination format is invalid. [ERROR_INVALID_MESSAGEDEST (0x4C2)] |
| Error code 1219 | Multiple connections to a shared server or resource by the same user using more than one username are not allowed. Disconnect all previous connections to the server or shared resource and try again. [ERROR_SESSION_CREDENTIAL_CONFLICT (0x4C3)] |
| Error code 1220 | An attempt was made to establish a session to a network server, but there are already too many sessions established for this server. [ERROR_REMOTE_SESSION_LIMIT_EXCEEDED (0x4C4)] |
| Error code 1221 | The workgroup or domain name is already in use by another computer on the network. [ERROR_DUP_DOMAINNAME (0x4C5)] |
| Error code 1222 | The network does not exist or has not been started. [ERROR_NO_NETWORK (0x4C6)] |
| Error code 1223 | The operation was canceled by the user. [ERROR_CANCELLED (0x4C7)] |
| Error code 1224 | The requested operation cannot be performed on a file with a specific partition open by the user. [ERROR_USER_MAPPED_FILE (0x4C8)] |
| Error code 1225 | The remote computer refused to connect to the network. [ERROR_CONNECTION_REFUSED (0x4C9)] |
| Error code 1226 | The network connection was closed gracefully. [ERROR_GRACEFUL_DISCONNECT (0x4CA)] |
| Error code 1227 | An address already exists associated with the network transport endpoint. [ERROR_ADDRESS_ALREADY_ASSOCIATED (0x4CB)] |
| Error code 1228 | The address was not associated with a network endpoint. [ERROR_ADDRESS_NOT_ASSOCIATED (0x4CC)] |
| Error code 1229 | An operation was attempted on a non-existent network connection. [ERROR_CONNECTION_INVALID (0x4CD)] |
| Error code 1230 | An invalid operation was attempted on an active network connection. [ERROR_CONNECTION_ACTIVE (0x4CE)] |
| Error code 1231 | The network location cannot be reached. For information about troubleshooting network problems, see Windows Help. [ERROR_NETWORK_UNREACHABLE (0x4CF)] |
| Error code 1232 | The network location cannot be reached. For information about troubleshooting network problems, see Windows Help. [ERROR_HOST_UNREACHABLE (0x4D0)] |
| Error code 1233 | The network location cannot be reached. For information about troubleshooting network problems, see Windows Help. [ERROR_PROTOCOL_UNREACHABLE (0x4D1)] |
| Error code 1234 | No service is running at the destination network endpoint on the remote system. [ERROR_PORT_UNREACHABLE (0x4D2)] |
| Error code 1235 | The request was aborted. [ERROR_REQUEST_ABORTED (0x4D3)] |
| Error code 1236 | The network connection was aborted by the local system. [ERROR_CONNECTION_ABORTED (0x4D4)] |
| Error code 1237 | The operation could not be completed. A retry is required. [ERROR_RETRY (0x4D5)] |
| Error code 1238 | A connection to the server could not be made because the maximum number of concurrent connections for this account has been reached. [ERROR_CONNECTION_COUNT_LIMIT (0x4D6)] |
| Error code 1239 | An attempt to log in during an unauthorized time of day for this account. [ERROR_LOGIN_TIME_RESTRICTION (0x4D7)] |
| Error code 1240 | The account is not authorized to log in from this terminal. [ERROR_LOGIN_WKSTA_RESTRICTION (0x4D8)] |
| Error code 1241 | The network address could not be used for the requested operation. [ERROR_INCORRECT_ADDRESS (0x4D9)] |
| Error code 1242 | The service is already registered. [ERROR_ALREADY_REGISTERED (0x4DA)] |
| Error code 1243 | The specified service does not exist. [ERROR_SERVICE_NOT_FOUND (0x4DB)] |
| Error code 1244 | The requested operation could not be performed because the user was not authenticated. [ERROR_NOT_AUTHENTICATED (0x4DC)] |
| Error code 1245 | The requested operation could not be performed because the user is not logged in to the network. The specified service does not exist. [ERROR_NOT_LOGGED_ON (0x4DD)] |
| Error code 1246 | Continue with work in progress. [ERROR_CONTINUE (0x4DE)] |
| Error code 1247 | An initialization operation was attempted when initialization had already completed. [ERROR_ALREADY_INITIALIZED (0x4DF)] |
| Error code 1248 | No more local devices. [ERROR_NO_MORE_DEVICES (0x4E0)] |
| Error code 1249 | The specified site does not exist. [ERROR_NO_SUCH_SITE (0x4E1)] |
| Error code 1250 | A domain controller with the specified name already exists. [ERROR_DOMAIN_CONTROLLER_EXISTS (0x4E2)] |
| Error code 1251 | This operation is only supported when you are connected to the server. [ERROR_ONLY_IF_CONNECTED (0x4E3)] |
| Error code 1252 | The group policy framework must call the extension even if there are no changes. [ERROR_OVERRIDE_NOCHANGES (0x4E4)] |
| Error code 1253 | The specified user does not have a valid profile. [ERROR_BAD_USER_PROFILE (0x4E5)] |
| Error code 1254 | This operation is not supported on a computer running Windows Server 2003 for Small Business Server [ERROR_NOT_SUPPORTED_ON_SBS (0x4E6)] |
| Error code 1255 | The server is shutting down. [ERROR_SERVER_SHUTDOWN_IN_PROGRESS (0x4E7)] |
| Error code 1256 | The remote system is unavailable. For information on troubleshooting network problems, see Windows Help. [ERROR_HOST_DOWN (0x4E8)] |
| Error code 1257 | The security ID provided is not from an account domain. [ERROR_NON_ACCOUNT_SID (0x4E9)] |
| Error code 1258 | The provided security identifier does not have a domain component. [ERROR_NON_DOMAIN_SID (0x4EA)] |
| Error code 1259 | The AppHelp dialog was canceled, preventing the application from starting. [ERROR_APPHELP_BLOCK (0x4EB)] |
| Error code 1260 | This program has been blocked by group policy. For more information, contact your system administrator. [ERROR_ACCESS_DISABLED_BY_POLICY (0x4EC)] |
| Error code 1261 | A program attempts to use an invalid registry value. This is usually caused by an uninitialized registry. This error is specific to Itanium. [ERROR_REG_NAT_CONSUMPTION (0x4ED)] |
| Error code 1262 | The share is currently offline or does not exist. [ERROR_CSCSHARE_OFFLINE (0x4EE)] |
| Error code 1263 | The Kerberos protocol encountered an error while validating the KDC certificate during smart card logon. More information is available in the system event log. [ERROR_PKINIT_FAILURE (0x4EF)] |
| Error code 1264 | The Kerberos protocol encountered an error while trying to use the smart card subsystem. [ERROR_SMARTCARD_SUBSYSTEM_FAILURE (0x4F0)] |
| Error code 1265 | The system has detected a possible security breach attempt. Please ensure you can connect to the server that authenticated you. [ERROR_DOWNGRADE_DETECTED (0x4F1)] |
| Error code 1271 | The device is locked and cannot be turned off without a force shutdown option. [ERROR_MACHINE_LOCKED (0x4F7)] |
| Error code 1273 | The application-defined callback operation returned invalid data when called. [ERROR_CALLBACK_SUPPLIED_INVALID_DATA (0x4F9)] |
| Error code 1274 | The Group Policy framework must call the extension during a synchronous foreground policy refresh. [ERROR_SYNC_FOREGROUND_REFRESH_REQUIRED (0x4FA)] |
| Error code 1275 | This driver has been blocked from loading [ERROR_DRIVER_BLOCKED (0x4FB)] |
| Error code 1276 | The dynamic link library (DLL) referenced a module that was neither a DLL nor the executable image for the process. [ERROR_INVALID_IMPORT_OF_NON_DLL (0x4FC)] |
| Error code 1277 | Windows cannot open this program because it is disabled. [ERROR_ACCESS_DISABLED_WEBBLADE (0x4FD)] |
| Error code 1278 | Windows cannot open this program because the license enforcement system has been tampered with or damaged. [ERROR_ACCESS_DISABLED_WEBBLADE_TAMPER (0x4FE)] |
| Error code 1279 | Transaction recovery failed. [ERROR_RECOVERY_FAILURE (0x4FF)] |
| Error code 1280 | The current thread has already been converted to fiber optics. [ERROR_ALREADY_FIBER (0x500)] |
| Error code 1281 | The current thread has already been converted from fiber. [ERROR_ALREADY_THREAD (0x501)] |
| Error code 1282 | The system detected a stack-based buffer overrun in this application. This overrun could allow a malicious user to take control of this application. [ERROR_STACK_BUFFER_OVERRUN (0x502)] |
| Error code 1283 | There is more data in one of the parameters than the function can operate on. [ERROR_PARAMETER_QUOTA_EXCEEDED (0x503)] |
| Error code 1284 | An attempt to perform an operation on a debug object failed because the object is being deleted. [ERROR_DEBUGGER_INACTIVE (0x504)] |
| Error code 1285 | An attempt to load a .dll file or obtain the address of a function in a .dll file failed. [ERROR_DELAY_LOAD_FAILED (0x505)] |
| Error code 1286 | %1 is a 16-bit application. You do not have permissions to execute 16-bit applications. Check your permissions with your system administrator. [ERROR_VDM_DISALLOWED (0x506)] |
| Error code 1287 | There is insufficient information to determine the cause of the failure. [ERROR_UNIDENTIFIED_ERROR (0x507)] |
| Error code 1288 | The parameter passed to the C runtime function is invalid. [ERROR_INVALID_CRUNTIME_PARAMETER (0x508)] |
| Error code 1289 | The operation occurred after the valid data length for the file. [ERROR_BEYOND_VDL (0x509)] |
| Error code 1290 | The service start failed because one or more services in the same process have an incompatible service SID type setting. A service with a restricted service SID type can only coexist in the same process with other services with a restricted SID type. If the service SID type has just been configured for this service, the hosting process must be restarted to start this service. [ERROR_INCOMPATIBLE_SERVICE_SID_TYPE (0x50A)] |
| Error code 1291 | The driver hosting process for this device has terminated. [ERROR_DRIVER_PROCESS_TERMINATED (0x50B)] |
| Error code 1292 | A process attempted to exceed an implementation-defined limit. [ERROR_IMPLEMENTATION_LIMIT (0x50C)] |
| Error code 1293 | Either the target process or the process containing the target thread is a protected process. [ERROR_PROCESS_IS_PROTECTED (0x50D)] |
| Error code 1294 | The service notification client lags too far behind the current state of services on the device. [ERROR_SERVICE_NOTIFY_CLIENT_LAGGING (0x50E)] |
| Error code 1295 | The requested file operation failed because the storage quota exceeded. To free up disk space, move the files to a different location or delete unnecessary files. For more information, contact your system administrator. [ERROR_DISK_QUOTA_EXCEEDED (0x50F)] |
| Error code 1296 | The requested file operation failed because storage policies prohibit this file type. For more information, contact your system administrator. [ERROR_CONTENT_BLOCKED (0x510)] |
| Error code 1297 | The privilege required by the service to function properly is missing from the service account configuration. You may use the Services Microsoft Management Console (MMC) snap-in (services.msc) and the Local Security Settings MMC snap-in (secpol.msc) to view the service and account configuration. [ERROR_INCOMPATIBLE_SERVICE_PRIVILEGE (0x511)] |
| Error code 1299 | Indicates that a specific security identifier may not be assigned as a label to an object. [ERROR_INVALID_LABEL (0x513)] |
| Error code 1300 | Not all of the indicated privileges or groups are assigned to the caller. [ERROR_NOT_ALL_ASSIGNED (0x514)] |
| Error code 1301 | Some mappings between account names and security IDs were not made. [ERROR_SOME_NOT_MAPPED (0x515)] |
| Error code 1302 | System quota limits are not specifically set for this account. [ERROR_NO_QUOTAS_FOR_ACCOUNT (0x516)] |
| Error code 1303 | No encryption key available. A known encryption key was returned. [ERROR_LOCAL_USER_SESSION_KEY (0x517)] |
| Error code 1304 | The password is too complex to be converted to a LAN Manager password. The returned LAN Manager password is a NULL string. [ERROR_NULL_LM_PASSWORD (0x518)] |
| Error code 1305 | Revision level unknown. [ERROR_UNKNOWN_REVISION (0x519)] |
| Error code 1306 | Indicates that two revision levels are incompatible. [ERROR_REVISION_MISMATCH (0x51A)] |
| Error code 1307 | This security ID may not be assigned as the owner of this object. [ERROR_INVALID_OWNER (0x51B)] |
| Error code 1308 | This security identifier may not be assigned as a primary group for an object. [ERROR_INVALID_PRIMARY_GROUP (0x51C)] |
| Error code 1309 | An attempt was made to operate on an impersonation token by a thread that is not currently impersonating a client. [ERROR_NO_IMPERSONATION_TOKEN (0x51D)] |
| Error code 1310 | The group may not be disabled. [ERROR_CANT_DISABLE_MANDATORY (0x51E)] |
| Error code 1311 | There are currently no login servers available to service your login request. [ERROR_NO_LOGON_SERVERS (0x51F)] |
| Error code 1312 | The specified logon session does not exist. It may have already been terminated. [ERROR_NO_SUCH_LOGON_SESSION (0x520)] |
| Error code 1313 | The specified privilege does not exist. [ERROR_NO_SUCH_PRIVILEGE (0x521)] |
| Error code 1314 | The requested privilege is not held by the client. [ERROR_PRIVILEGE_NOT_HELD (0x522)] |
| Error code 1315 | The name provided is not a correctly formed account name. [ERROR_INVALID_ACCOUNT_NAME (0x523)] |
| Error code 1316 | The specified account already exists. [ERROR_USER_EXISTS (0x524)] This is not the same as the 524 error you might see in your browser. |
| Error code 1317 | The specified account does not exist. [ERROR_NO_SUCH_USER (0x525)] |
| Error code 1318 | The predefined group. [ERROR_GROUP_EXISTS (0x526)] |
| Error code 1319 | The specified group does not exist. [ERROR_NO_SUCH_GROUP (0x527)] |
| Error code 1320 | Either the specified user account is already a member of the specified group, or the specified group cannot be deleted because it contains a member. [ERROR_MEMBER_IN_GROUP (0x528)] |
| Error code 1321 | The specified user account is not a member of the specified group account. [ERROR_MEMBER_NOT_IN_GROUP (0x529)] |
| Error code 1322 | The last remaining administration account cannot be disabled or deleted. [ERROR_LAST_ADMIN (0x52A)] |
| Error code 1323 | Unable to update password. The value provided as the current password is incorrect. [ERROR_WRONG_PASSWORD (0x52B)] |
| Error code 1324 | Unable to update password. The provided new password contains values that are not allowed in passwords. [ERROR_ILL_FORMED_PASSWORD (0x52C)] |
| Error code 1325 | Unable to update password. The value provided for the new password does not meet the length complexity or archive requirements for the domain. [ERROR_PASSWORD_RESTRICTION (0x52D)] |
| Error code 1326 | login failed |
| Error code 1327 | login failed |
| Error code 1328 | login failed |
| Error code 1329 | login failed |
| Error code 1330 | login failed |
| Error code 1331 | login failed |
| Error code 1332 | No mapping between account names and security IDs was performed. [ERROR_NONE_MAPPED (0x534)] |
| Error code 1333 | Too many local user IDs (LUIDs) were requested at once. [ERROR_TOO_MANY_LUIDS_REQUESTED (0x535)] |
| Error code 1334 | No more local user identifiers (LUIDs) are available. [ERROR_LUIDS_EXHAUSTED (0x536)] |
| Error code 1335 | The sub-authority part of the security identifier is invalid for this particular use. [ERROR_INVALID_SUB_AUTHORITY (0x537)] |
| Error code 1336 | The access control list (ACL) structure is invalid. [ERROR_INVALID_ACL (0x538)] |
| Error code 1337 | Invalid security identifier structure. [ERROR_INVALID_SID (0x539)] |
| Error code 1338 | The security descriptor structure is invalid. [ERROR_INVALID_SECURITY_DESCR (0x53A)] |
| Error code 1340 | The inherited access control list (ACL) or access control entry (ACE) could not be created. [ERROR_BAD_INHERITANCE_ACL (0x53C)] |
| Error code 1341 | The server is currently down. [ERROR_SERVER_DISABLED (0x53D)] |
| Error code 1342 | The server is currently enabled. [ERROR_SERVER_NOT_DISABLED (0x53E)] |
| Error code 1343 | The value provided was an invalid ID authority value. [ERROR_INVALID_ID_AUTHORITY (0x53F)] |
| Error code 1344 | No additional memory is available for security information updates. [ERROR_ALLOTTED_SPACE_EXCEEDED (0x540)] |
| Error code 1345 | The specified attributes are invalid or incompatible with the attributes of the group as a whole. [ERROR_INVALID_GROUP_ATTRIBUTES (0x541)] |
| Error code 1346 | No required impersonation level was provided or the provided impersonation level is invalid. [ERROR_BAD_IMPERSONATION_LEVEL (0x542)] |
| Error code 1347 | An anonymous security token could not be opened. [ERROR_CANT_OPEN_ANONYMOUS (0x543)] |
| Error code 1348 | The requested validation information class is invalid. [ERROR_BAD_VALIDATION_CLASS (0x544)] |
| Error code 1349 | The token type is not suitable for the attempt to use. [ERROR_BAD_TOKEN_TYPE (0x545)] |
| Error code 1350 | Unable to perform a security operation on an object that has no security associated. [ERROR_NO_SECURITY_ON_OBJECT (0x546)] |
| Error code 1351 | Configuration information could not be read from the domain controller because either the device is unavailable or access is denied. [ERROR_CANT_ACCESS_DOMAIN_INFO (0x547)] |
| Error code 1352 | The Security Account Manager (SAM) or Local Security Authority (LSA) server was in the wrong state to perform the security operation. [ERROR_INVALID_SERVER_STATE (0x548)] |
| Error code 1353 | The domain was in the wrong state to perform the security operation. [ERROR_INVALID_DOMAIN_STATE (0x549)] |
| Error code 1354 | This operation is only allowed for the primary domain controller of the domain. [ERROR_INVALID_DOMAIN_ROLE (0x54A)] |
| Error code 1355 | Either the specified domain does not exist or could not be contacted. [ERROR_NO_SUCH_DOMAIN (0x54B)] |
| Error code 1356 | The domain is already specified. [ERROR_DOMAIN_EXISTS (0x54C)] |
| Error code 1357 | An attempt was made to exceed the maximum number of domains per server. [ERROR_DOMAIN_LIMIT_EXCEEDED (0x54D)] |
| Error code 1358 | The requested operation could not be completed due to either a catastrophic media failure or data structure corruption on the disk. [ERROR_INTERNAL_DB_CORRUPTION (0x54E)] |
| Error code 1359 | An internal error occurred. [ERROR_INTERNAL_ERROR (0x54F)] |
| Error code 1360 | Generic access types are included in an access mask that should already be mapped to non-generic types. [ERROR_GENERIC_NOT_MAPPED (0x550)] |
| Error code 1361 | The security descriptor is not in the correct format (absolute or self-relative). [ERROR_BAD_DESCRIPTOR_FORMAT (0x551)] |
| Error code 1362 | The requested action is restricted to use by logins only. The calling process is not registered as a login process. [ERROR_NOT_LOGON_PROCESS (0x552)] |
| Error code 1363 | A new logon session cannot be started with an ID already in use. [ERROR_LOGON_SESSION_EXISTS (0x553)] |
| Error code 1364 | The specified authentication package is unknown. [ERROR_NO_SUCH_PACKAGE (0x554)] |
| Error code 1365 | The logon session is not in a state that matches the requested operation. [ERROR_BAD_LOGON_SESSION_STATE (0x555)] |
| Error code 1366 | The login session ID is already in use. [ERROR_LOGON_SESSION_COLLISION (0x556)] |
| Error code 1367 | The login request contained an invalid login type value. [ERROR_INVALID_LOGON_TYPE (0x557)] |
| Error code 1368 | Unable to impersonate a named pipe until data is read from that pipe. [ERROR_CANNOT_IMPERSONATE (0x558)] |
| Error code 1369 | The transaction state of the log subtree is incompatible with the requested operation. [ERROR_RXACT_INVALID_STATE (0x559)] |
| Error code 1370 | A corruption was encountered in the internal security database. [ERROR_RXACT_COMMIT_FAILURE (0x55A)] |
| Error code 1371 | This operation cannot be performed on embedded accounts. [ERROR_SPECIAL_ACCOUNT (0x55B)] |
| Error code 1372 | This operation cannot be performed on this special built-in group. [ERROR_SPECIAL_GROUP (0x55C)] |
| Error code 1373 | This operation cannot be performed on this built-in special user. [ERROR_SPECIAL_USER (0x55D)] |
| Error code 1374 | The user cannot be removed from a group because the group is currently the user's primary group. [ERROR_MEMBERS_PRIMARY_GROUP (0x55E)] |
| Error code 1375 | The token is already in use as a primary token. [ERROR_TOKEN_ALREADY_IN_USE (0x55F)] |
| Error code 1376 | The specified local group does not exist. [ERROR_NO_SUCH_ALIAS (0x560)] |
| Error code 1377 | The specified account name is not a member of the group. [ERROR_MEMBER_NOT_IN_ALIAS (0x561)] |
| Error code 1378 | The specified account name is already a member of the group. [ERROR_MEMBER_IN_ALIAS (0x562)] |
| Error code 1379 | The specified local group already exists. [ERROR_ALIAS_EXISTS (0x563)] |
| Error code 1380 | login failed |
| Error code 1381 | The maximum number of secrets that can be stored on a single system has been exceeded. [ERROR_TOO_MANY_SECRETS (0x565)] |
| Error code 1382 | The secret length exceeds the maximum allowed length. [ERROR_SECRET_TOO_LONG (0x566)] |
| Error code 1383 | The local security authority database contains an internal inconsistency. [ERROR_INTERNAL_DB_ERROR (0x567)] |
| Error code 1384 | While trying to log in, the user's security context accumulated too many security IDs. [ERROR_TOO_MANY_CONTEXT_IDS (0x568)] |
| Error code 1385 | login failed |
| Error code 1386 | An encrypted password is required to change the user's password. [ERROR_NT_CROSS_ENCRYPTION_REQUIRED (0x56A)] |
| Error code 1387 | A member could not be added to or removed from the local group because the member does not exist. [ERROR_NO_SUCH_MEMBER (0x56B)] |
| Error code 1388 | A new member could not be added to a local group because the member has the wrong account type. [ERROR_INVALID_MEMBER (0x56C)] |
| Error code 1389 | Too many security identifiers were specified. [ERROR_TOO_MANY_SIDS (0x56D)] |
| Error code 1390 | An encrypted password is required to change this user's password. [ERROR_LM_CROSS_ENCRYPTION_REQUIRED (0x56E)] |
| Error code 1391 | Indicates that the access control list (ACL) contains no inheritable components. [ERROR_NO_INHERITANCE (0x56F)] |
| Error code 1392 | The file or directory is corrupted and unreadable. [ERROR_FILE_CORRUPT (0x570)] |
| Error code 1393 | The disk structure is corrupted and unreadable. [ERROR_DISK_CORRUPT (0x571)] |
| Error code 1394 | There is no user session key for the specified login session. [ERROR_NO_USER_SESSION_KEY (0x572)] |
| Error code 1395 | The service being accessed is licensed for a certain number of connections. No more connections to the service can be made at this time because there are already too many connections for the service to accept. [ERROR_LICENSE_QUOTA_EXCEEDED (0x573)] |
| Error code 1396 | login failed |
| Error code 1397 | Mutual authentication failed. The server password is outdated on the domain controller. [ERROR_MUTUAL_AUTH_FAILED (0x575)] |
| Error code 1398 | There is a time and/or date difference between the client and the server. [ERROR_TIME_SKEW (0x576)] |
| Error code 1399 | This operation cannot be performed on the current domain. [ERROR_CURRENT_DOMAIN_NOT_ALLOWED (0x577)] |
| Error code 1400 | The window handle is invalid. [ERROR_INVALID_WINDOW_HANDLE (0x578)] |
| Error code 1401 | The menu handle is invalid. [ERROR_INVALID_MENU_HANDLE (0x579)] |
| Error code 1402 | The cursor handle is invalid. [ERROR_INVALID_CURSOR_HANDLE (0x57A)] |
| Error code 1403 | The accelerator table handle is invalid. [ERROR_INVALID_ACCEL_HANDLE (0x57B)] |
| Error code 1404 | Invalid hook handle. [ERROR_INVALID_HOOK_HANDLE (0x57C)] |
| Error code 1405 | Invalid handle for multi-window position structure. [ERROR_INVALID_DWP_HANDLE (0x57D)] |
| Error code 1406 | A top-level subwindow cannot be created. [ERROR_TLW_WITH_WSCHILD (0x57E)] |
| Error code 1407 | The window class could not be found. [ERROR_CANNOT_FIND_WND_CLASS (0x57F)] |
| Error code 1408 | Invalid window. It belongs to another thread. [ERROR_WINDOW_OF_OTHER_THREAD (0x580)] |
| Error code 1409 | The hotkey has already been registered. [ERROR_HOTKEY_ALREADY_REGISTERED (0x581)] |
| Error code 1410 | The class already exists. [ERROR_CLASS_ALREADY_EXISTS (0x582)] |
| Error code 1411 | The class does not exist. [ERROR_CLASS_DOES_NOT_EXIST (0x583)] |
| Error code 1412 | The class still has windows open. [ERROR_CLASS_HAS_WINDOWS (0x584)] |
| Error code 1413 | Invalid index. [ERROR_INVALID_INDEX (0x585)] |
| Error code 1414 | The icon handle is invalid. [ERROR_INVALID_ICON_HANDLE (0x586)] |
| Error code 1415 | Using private dialog window keywords. [ERROR_PRIVATE_DIALOG_INDEX (0x587)] |
| Error code 1416 | The list box ID was not found. [ERROR_LISTBOX_ID_NOT_FOUND (0x588)] |
| Error code 1417 | No wildcard characters found. [ERROR_NO_WILDCARD_CHARACTERS (0x589)] |
| Error code 1418 | The clipboard is not open. [ERROR_CLIPBOARD_NOT_OPEN (0x58A)] |
| Error code 1419 | The hotkey was not registered. [ERROR_HOTKEY_NOT_REGISTERED (0x58B)] |
| Error code 1420 | The window is not a valid dialog window. [ERROR_WINDOW_NOT_DIALOG (0x58C)] |
| Error code 1421 | The control ID does not exist. [ERROR_CONTROL_ID_NOT_FOUND (0x58D)] |
| Error code 1422 | Invalid message for a combo box because it does not contain an edit control. [ERROR_INVALID_COMBOBOX_MESSAGE (0x58E)] |
| Error code 1423 | The window is not a combo box. [ERROR_WINDOW_NOT_COMBOBOX (0x58F)] |
| Error code 1424 | Height must be less than 256. [ERROR_INVALID_EDIT_HEIGHT (0x590)] |
| Error code 1425 | The device context (DC) handle is invalid. [ERROR_DC_NOT_FOUND (0x591)] |
| Error code 1426 | The type of the add-in action in the routine is invalid. [ERROR_INVALID_HOOK_FILTER (0x592)] |
| Error code 1427 | The filter position in the routine is invalid. [ERROR_INVALID_FILTER_PROC (0x593)] |
| Error code 1428 | A non-local hook cannot be set without a module handle. [ERROR_HOOK_NEEDS_HMOD (0x594)] |
| Error code 1429 | This hook action can only be set globally. [ERROR_GLOBAL_ONLY_HOOK (0x595)] |
| Error code 1430 | The journal hook procedure has already been installed. [ERROR_JOURNAL_HOOK_SET (0x596)] |
| Error code 1431 | Hook action not installed. [ERROR_HOOK_NOT_INSTALLED (0x597)] |
| Error code 1432 | Invalid message for single-select list box. [ERROR_INVALID_LB_MESSAGE (0x598)] |
| Error code 1433 | LB_SETCOUNT was sent to a non-lazy list box. [ERROR_SETCOUNT_ON_BAD_LB (0x599)] |
| Error code 1434 | This list box does not support tab stops. [ERROR_LB_WITHOUT_TABSTOPS (0x59A)] |
| Error code 1435 | An object created by another thread cannot be destroyed. [ERROR_DESTROY_OBJECT_OF_OTHER_THREAD (0x59B)] |
| Error code 1436 | Child windows cannot have menus. [ERROR_CHILD_WINDOW_MENU (0x59C)] |
| Error code 1437 | You did not have a system menu window. [ERROR_NO_SYSTEM_MENU (0x59D)] |
| Error code 1438 | The message box style is invalid. [ERROR_INVALID_MSGBOX_STYLE (0x59E)] |
| Error code 1439 | The parameter (SPI_*) is invalid at the system level. [ERROR_INVALID_SPI_VALUE (0x59F)] |
| Error code 1440 | The screen is already locked. [ERROR_SCREEN_ALREADY_LOCKED (0x5A0)] |
| Error code 1441 | All window handles in a multi-window position structure must have the same parent. [ERROR_HWNDS_HAVE_DIFF_PARENT (0x5A1)] |
| Error code 1442 | The window is not the child's window. [ERROR_NOT_CHILD_WINDOW (0x5A2)] |
| Error code 1443 | Invalid GW_* command. [ERROR_INVALID_GW_COMMAND (0x5A3)] |
| Error code 1444 | Invalid thread ID. [ERROR_INVALID_THREAD_ID (0x5A4)] |
| Error code 1445 | A message from a window that is not a Multiple Document Interface (MDI) window cannot be processed. [ERROR_NON_MDICHILD_WINDOW (0x5A5)] |
| Error code 1446 | The popup menu is already active. [ERROR_POPUP_ALREADY_ACTIVE (0x5A6)] |
| Error code 1447 | You do not have a scrollbar window. [ERROR_NO_SCROLLBARS (0x5A7)] |
| Error code 1448 | The scroll bar range cannot be greater than MAXLONG. [ERROR_INVALID_SCROLLBAR_RANGE (0x5A8)] |
| Error code 1449 | The window cannot be shown or removed in the specified manner. [ERROR_INVALID_SHOWWIN_COMMAND (0x5A9)] |
| Error code 1450 | There are insufficient system resources to complete the requested service. [ERROR_NO_SYSTEM_RESOURCES (0x5AA)] |
| Error code 1451 | There are insufficient system resources to complete the requested service. [ERROR_NONPAGED_SYSTEM_RESOURCES (0x5AB)] |
| Error code 1452 | There are insufficient system resources to complete the requested service. [ERROR_PAGED_SYSTEM_RESOURCES (0x5AC)] |
| Error code 1453 | Insufficient quota to complete the requested service. [ERROR_WORKING_SET_QUOTA (0x5AD)] |
| Error code 1454 | Insufficient quota to complete the requested service. [ERROR_PAGEFILE_QUOTA (0x5AE)] |
| Error code 1455 | The paging file is too small for this operation to complete. [ERROR_COMMITMENT_LIMIT (0x5AF)] |
| Error code 1456 | Menu item not found. [ERROR_MENU_ITEM_NOT_FOUND (0x5B0)] |
| Error code 1457 | The keyboard layout handle is invalid. [ERROR_INVALID_KEYBOARD_HANDLE (0x5B1)] |
| Error code 1458 | Hook type not allowed. [ERROR_HOOK_TYPE_NOT_ALLOWED (0x5B2)] |
| Error code 1459 | This operation requires an interactive window station. [ERROR_REQUIRES_INTERACTIVE_WINDOWSTATION (0x5B3)] |
| Error code 1460 | This operation returned due to a timeout. [ERROR_TIMEOUT (0x5B4)] |
| Error code 1461 | Invalid monitor handle. [ERROR_INVALID_MONITOR_HANDLE (0x5B5)] |
| Error code 1462 | Invalid size argument. [ERROR_INCORRECT_SIZE (0x5B6)] |
| Error code 1463 | The symbolic link cannot be followed because it is of a disabled type. [ERROR_SYMLINK_CLASS_DISABLED (0x5B7)] |
| Error code 1464 | This application does not support the current operation on symbolic links. [ERROR_SYMLINK_NOT_SUPPORTED (0x5B8)] |
| Error code 1465 | Windows could not parse the requested XML data. [ERROR_XML_PARSE_ERROR (0x5B9)] |
| Error code 1466 | An error occurred while processing an XML digital signature. [ERROR_XMLDSIG_ERROR (0x5BA)] |
| Error code 1467 | This application must be restarted. [ERROR_RESTART_APPLICATION (0x5BB)] |
| Error code 1468 | The caller made a connection request to the wrong routing compartment. [ERROR_WRONG_COMPARTMENT (0x5BC)] |
| Error code 1469 | An authentication failure occurred when attempting to connect to the remote host. [ERROR_AUTHIP_FAILURE (0x5BD)] |
| Error code 1500 | The event log file is corrupted. [ERROR_EVENTLOG_FILE_CORRUPT (0x5DC)] |
| Error code 1501 | The event log file could not be opened so the event logging service did not start. [ERROR_EVENTLOG_CANT_START (0x5DD)] |
| Error code 1502 | The event log file is full. [ERROR_LOG_FILE_FULL (0x5DE)] |
| Error code 1503 | The event log file has been changed between reads. [ERROR_EVENTLOG_FILE_CHANGED (0x5DF)] |
| Error code 1550 | The specified task name is invalid. [ERROR_INVALID_TASK_NAME (0x60E)] |
| Error code 1551 | The specified task index is invalid. [ERROR_INVALID_TASK_INDEX (0x60F)] |
| Error code 1552 | The specified thread is already joining a task. [ERROR_THREAD_ALREADY_IN_TASK (0x610)] |
| Error code 1552 | The specified thread is already joining a task. [ERROR_THREAD_ALREADY_IN_TASK (0x610)] |
| Error code 1552 | The specified thread is already joining a task. [ERROR_THREAD_ALREADY_IN_TASK (0x610)] |
| Error code 1552 | The specified thread is already joining a task. [ERROR_THREAD_ALREADY_IN_TASK (0x610)] |
| Error code 1605 | This action is only valid for currently installed products. [ERROR_UNKNOWN_PRODUCT (0x645)] |
| Error code 1606 | Feature ID not registered. [ERROR_UNKNOWN_FEATURE (0x646)] |
| Error code 1607 | Component ID not registered. [ERROR_UNKNOWN_COMPONENT (0x647)] |
| Error code 1608 | Unknown property. [ERROR_UNKNOWN_PROPERTY (0x648)] |
| Error code 1609 | The handle is in an invalid state. [ERROR_INVALID_HANDLE_STATE (0x649)] |
| Error code 1610 | The configuration data for this product is corrupted. Contact your support personnel. [ERROR_BAD_CONFIGURATION (0x64A)] |
| Error code 1611 | Component qualifier not found. [ERROR_INDEX_ABSENT (0x64B)] |
| Error code 1612 | The installation source for this product is not available. Verify that the source exists and that you can access it. [ERROR_INSTALL_SOURCE_ABSENT (0x64C)] |
| Error code 1613 | This installation package cannot be installed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service. [ERROR_INSTALL_PACKAGE_VERSION (0x64D)] |
| Error code 1614 | The product has been uninstalled. [ERROR_PRODUCT_UNINSTALLED (0x64E)] |
| Error code 1615 | Invalid or unsupported SQL query syntax. [ERROR_BAD_QUERY_SYNTAX (0x64F)] |
| Error code 1616 | The record field does not exist. [ERROR_INVALID_FIELD (0x650)] |
| Error code 1617 | The device has been removed. [ERROR_DEVICE_REMOVED (0x651)] |
| Error code 1618 | Another installation is already in progress. Complete that installation before continuing with this one. [ERROR_INSTALL_ALREADY_RUNNING (0x652)] |
| Error code 1619 | This installation package could not be opened. Verify that the package exists and that you can access it, or contact the application vendor to verify the validity of the Windows Installer package. [ERROR_INSTALL_PACKAGE_OPEN_FAILED (0x653)] |
| Error code 1620 | This installation package could not be opened. Contact the application vendor to verify the validity of the Windows Installer package. [ERROR_INSTALL_PACKAGE_INVALID (0x654)] |
| Error code 1621 | An error occurred while starting the Windows Installer service user interface. Contact your support personnel. [ERROR_INSTALL_UI_FAILURE (0x655)] |
| Error code 1622 | Error opening installation log file. Verify that the specified log file location exists and that you can write to it. [ERROR_INSTALL_LOG_FAILURE (0x656)] |
| Error code 1623 | The language of this installation package is not supported by your system. [ERROR_INSTALL_LANGUAGE_UNSUPPORTED (0x657)] |
| Error code 1624 | Error applying transforms. Verify that the specified transform paths are valid. [ERROR_INSTALL_TRANSFORM_FAILURE (0x658)] |
| Error code 1625 | This installation is prohibited by system policy. Contact your system administrator. [ERROR_INSTALL_PACKAGE_REJECTED (0x659)] |
| Error code 1626 | The function cannot be executed. [ERROR_FUNCTION_NOT_CALLED (0x65A)] |
| Error code 1627 | The function failed during execution. [ERROR_FUNCTION_FAILED (0x65B)] |
| Error code 1628 | An invalid or unknown table was specified. [ERROR_INVALID_TABLE (0x65C)] |
| Error code 1629 | The data provided is of the wrong type. [ERROR_DATATYPE_MISMATCH (0x65D)] |
| Error code 1630 | Data of this type is not supported. [ERROR_UNSUPPORTED_TYPE (0x65E)] |
| Error code 1631 | The Windows Installer service failed to start. Contact your support personnel. [ERROR_CREATE_FAILED (0x65F)] |
| Error code 1632 | The Temp folder is located on a drive that is full or inaccessible. Free up space on the drive or verify that you have write permission to the Temp folder. [ERROR_INSTALL_TEMP_UNWRITABLE (0x660)] |
| Error code 1633 | This installation package is not supported by this type of processor. Contact your product vendor. [ERROR_INSTALL_PLATFORM_UNSUPPORTED (0x661)] |
| Error code 1634 | The component is not used on this computer. [ERROR_INSTALL_NOTUSED (0x662)] |
| Error code 1635 | This update package could not be opened. Verify that the update package exists and that you can access it, or contact the application vendor to verify the validity of the Windows Installer update package. [ERROR_PATCH_PACKAGE_OPEN_FAILED (0x663)] |
| Error code 1636 | This update package could not be opened. Contact the application vendor to verify that the Windows Installer update package is valid. [ERROR_PATCH_PACKAGE_INVALID (0x664)] |
| Error code 1637 | This update package cannot be processed by the Windows Installer service. You must install a Windows service pack that contains a newer version of the Windows Installer service. [ERROR_PATCH_PACKAGE_UNSUPPORTED (0x665)] |
| Error code 1638 | Another version of this product is already installed. The installation of this version cannot continue. To configure or remove the current version of this product, use Add/Remove Programs in Control Panel. [ERROR_PRODUCT_VERSION (0x666)] |
| Error code 1639 | Invalid command line argument. Consult the Windows Installer SDK for detailed command line instructions. [ERROR_INVALID_COMMAND_LINE (0x667)] |
| Error code 1640 | Only administrators have permission to add, remove, or configure server software during a Remote Terminal Services session. If you want to install or configure software on the server, contact your network administrator. [ERROR_INSTALL_REMOTE_DISALLOWED (0x668)] |
| Error code 1641 | The requested operation completed successfully. The system will restart for the changes to take effect. [ERROR_SUCCESS_REBOOT_INITIATED (0x669)] |
| Error code 1642 | The upgrade cannot be installed by the Windows Installer service because the program to be upgraded may be missing or the upgrade may update a different version of the program. Check that the program to be upgraded is present on your computer and that you have the correct upgrade. [ERROR_PATCH_TARGET_NOT_FOUND (0x66A)] |
| Error code 1643 | The update package is not allowed by software restriction policy. [ERROR_PATCH_PACKAGE_REJECTED (0x66B)] |
| Error code 1644 | The software restriction policy does not allow one or more customizations. [ERROR_INSTALL_TRANSFORM_REJECTED (0x66C)] |
| Error code 1645 | Windows Installer does not allow installation from a remote desktop connection. [ERROR_INSTALL_REMOTE_PROHIBITED (0x66D)] |
| Error code 1646 | Uninstalling the update package is not supported. [ERROR_PATCH_REMOVAL_UNSUPPORTED (0x66E)] |
| Error code 1647 | The update has not been applied to this product. [ERROR_UNKNOWN_PATCH (0x66F)] |
| Error code 1648 | A valid patch sequence could not be found. [ERROR_PATCH_NO_SEQUENCE (0x670)] |
| Error code 1649 | Update removal was prevented by policy. [ERROR_PATCH_REMOVAL_DISALLOWED (0x671)] |
| Error code 1650 | Invalid XML update data. [ERROR_INVALID_PATCH_XML (0x672)] |
| Error code 1651 | Windows Installer does not allow updates of advertised managed products. At least one feature of the product must be installed before the update can be applied. [ERROR_PATCH_MANAGED_ADVERTISED_PRODUCT (0x673)] |
| Error code 1652 | The Windows Installer service cannot be accessed in Safe Mode. Please try again when your computer is not in Safe Mode, or you can use System Restore to restore your computer to a previous good state. [ERROR_INSTALL_SERVICE_SAFEBOOT (0x674)] |
| Error code 1700 | Invalid string binding. [RPC_S_INVALID_STRING_BINDING (0x6A4)] |
| Error code 1701 | The binding handle is not of the correct type. [RPC_S_WRONG_KIND_OF_BINDING (0x6A5)] |
| Error code 1702 | Invalid binding handler. [RPC_S_INVALID_BINDING (0x6A6)] |
| Error code 1703 | Unsupported RPC protocol sequence. [RPC_S_PROTSEQ_NOT_SUPPORTED (0x6A7)] |
| Error code 1704 | Invalid RPC protocol sequence. [RPC_S_INVALID_RPC_PROTSEQ (0x6A8)] |
| Error code 1705 | The universally unique identifier (UUID) for the string is invalid. [RPC_S_INVALID_STRING_UUID (0x6A9)] |
| Error code 1706 | Invalid endpoint format. [RPC_S_INVALID_ENDPOINT_FORMAT (0x6AA)] |
| Error code 1707 | Invalid network address. [RPC_S_INVALID_NET_ADDR (0x6AB)] |
| Error code 1708 | No endpoint found. [RPC_S_NO_ENDPOINT_FOUND (0x6AC)] |
| Error code 1709 | The timeout value is invalid. [RPC_S_INVALID_TIMEOUT (0x6AD)] |
| Error code 1710 | The object's universally unique identifier (UUID) was not found. [RPC_S_OBJECT_NOT_FOUND (0x6AE)] |
| Error code 1711 | The object's universal unique identifier (UUID) has already been registered. [RPC_S_ALREADY_REGISTERED (0x6AF)] |
| Error code 1712 | The universally unique identifier (UUID) for the type has already been registered. [RPC_S_TYPE_ALREADY_REGISTERED (0x6B0)] |
| Error code 1713 | The RPC server is already listening. [RPC_S_ALREADY_LISTENING (0x6B1)] |
| Error code 1714 | No protocol sequences were registered. [RPC_S_NO_PROTSEQS_REGISTERED (0x6B2)] |
| Error code 1715 | The RPC server is not listening. [RPC_S_NOT_LISTENING (0x6B3)] |
| Error code 1716 | Unknown manager type. [RPC_S_UNKNOWN_MGR_TYPE (0x6B4)] |
| Error code 1717 | Interface unknown. [RPC_S_UNKNOWN_IF (0x6B5)] |
| Error code 1718 | No bindings. [RPC_S_NO_BINDINGS (0x6B6)] |
| Error code 1719 | No protocol sequence. [RPC_S_NO_PROTSEQS (0x6B7)] |
| Error code 1720 | The endpoint could not be created. [RPC_S_CANT_CREATE_ENDPOINT (0x6B8)] |
| Error code 1721 | Not enough resources are available to complete this operation. [RPC_S_OUT_OF_RESOURCES (0x6B9)] |
| Error code 1722 | The RPC server is unavailable. [RPC_S_SERVER_UNAVAILABLE (0x6BA)] |
| Error code 1723 | The RPC server is too busy to complete this operation. [RPC_S_SERVER_TOO_BUSY (0x6BB)] |
| Error code 1724 | Invalid network options. [RPC_S_INVALID_NETWORK_OPTIONS (0x6BC)] |
| Error code 1725 | There are no active remote procedure calls on this thread. [RPC_S_NO_CALL_ACTIVE (0x6BD)] |
| Error code 1726 | The remote procedure call failed. [RPC_S_CALL_FAILED (0x6BE)] |
| Error code 1727 | The remote procedure call failed and was not executed. [RPC_S_CALL_FAILED_DNE (0x6BF)] |
| Error code 1728 | A remote procedure call (RPC) protocol error occurred. [RPC_S_PROTOCOL_ERROR (0x6C0)] |
| Error code 1729 | HTTP proxy access denied. [RPC_S_PROXY_ACCESS_DENIED (0x6C1)] |
| Error code 1730 | The RPC server does not support the transport syntax. [RPC_S_UNSUPPORTED_TRANS_SYN (0x6C2)] |
| Error code 1732 | Unsupported Universal Unique Identifier (UUID) type. [RPC_S_UNSUPPORTED_TYPE (0x6C4)] |
| Error code 1733 | The tag is invalid. [RPC_S_INVALID_TAG (0x6C5)] |
| Error code 1734 | Invalid group boundary. [RPC_S_INVALID_BOUND (0x6C6)] |
| Error code 1735 | The block does not contain an entry name. [RPC_S_NO_ENTRY_NAME (0x6C7)] |
| Error code 1736 | Invalid name syntax. [RPC_S_INVALID_NAME_SYNTAX (0x6C8)] |
| Error code 1737 | The name syntax is not supported. [RPC_S_UNSUPPORTED_NAME_SYNTAX (0x6C9)] |
| Error code 1739 | No network address is available to use to generate a universally unique identifier (UUID). [RPC_S_UUID_NO_ADDRESS (0x6CB)] |
| Error code 1740 | The endpoint is a duplicate. [RPC_S_DUPLICATE_ENDPOINT (0x6CC)] |
| Error code 1741 | Unknown authentication type. [RPC_S_UNKNOWN_AUTHN_TYPE (0x6CD)] |
| Error code 1742 | The maximum number of calls is too small. [RPC_S_MAX_CALLS_TOO_SMALL (0x6CE)] |
| Error code 1743 | The string is too long. [RPC_S_STRING_TOO_LONG (0x6CF)] |
| Error code 1744 | RPC protocol sequence not found. [RPC_S_PROTSEQ_NOT_FOUND (0x6D0)] |
| Error code 1745 | Procedure number out of range. [RPC_S_PROCNUM_OUT_OF_RANGE (0x6D1)] |
| Error code 1746 | The binding does not contain any authentication information. [RPC_S_BINDING_HAS_NO_AUTH (0x6D2)] |
| Error code 1747 | Unknown authentication service. [RPC_S_UNKNOWN_AUTHN_SERVICE (0x6D3)] |
| Error code 1748 | Unknown authentication level. [RPC_S_UNKNOWN_AUTHN_LEVEL (0x6D4)] |
| Error code 1749 | The security context is invalid. [RPC_S_INVALID_AUTH_IDENTITY (0x6D5)] |
| Error code 1750 | Unknown authorization service. [RPC_S_UNKNOWN_AUTHZ_SERVICE (0x6D6)] |
| Error code 1751 | Invalid entry. [EPT_S_INVALID_ENTRY (0x6D7)] |
| Error code 1752 | The endpoint server could not perform the operation. [EPT_S_CANT_PERFORM_OP (0x6D8)] |
| Error code 1753 | There are no more endpoints available from the endpoint mapper. [EPT_S_NOT_REGISTERED (0x6D9)] |
| Error code 1754 | No interfaces were exported. [RPC_S_NOTHING_TO_EXPORT (0x6DA)] |
| Error code 1755 | Incomplete entry name. [RPC_S_INCOMPLETE_NAME (0x6DB)] |
| Error code 1756 | Invalid version option. [RPC_S_INVALID_VERS_OPTION (0x6DC)] |
| Error code 1757 | There are no more members. [RPC_S_NO_MORE_MEMBERS (0x6DD)] |
| Error code 1758 | Nothing. [RPC_S_NOT_ALL_OBJS_UNEXPORTED (0x6DE)] |
| Error code 1759 | No interface found. [RPC_S_INTERFACE_NOT_FOUND (0x6DF)] |
| Error code 1760 | Entry already exists. [RPC_S_ENTRY_ALREADY_EXISTS (0x6E0)] |
| Error code 1761 | Entry not found. [RPC_S_ENTRY_NOT_FOUND (0x6E1)] |
| Error code 1762 | The name service is unavailable. [RPC_S_NAME_SERVICE_UNAVAILABLE (0x6E2)] |
| Error code 1763 | Invalid network address family. [RPC_S_INVALID_NAF_ID (0x6E3)] |
| Error code 1764 | The requested operation is not supported. [RPC_S_CANNOT_SUPPORT (0x6E4)] |
| Error code 1765 | No security context is available to allow impersonation. [RPC_S_NO_CONTEXT_AVAILABLE (0x6E5)] |
| Error code 1766 | An internal error occurred in a remote procedure call (RPC). [RPC_S_INTERNAL_ERROR (0x6E6)] |
| Error code 1767 | The RPC server attempted to divide an integer by zero. [RPC_S_ZERO_DIVIDE (0x6E7)] |
| Error code 1768 | An addressing error occurred on the RPC server. [RPC_S_ADDRESS_ERROR (0x6E8)] |
| Error code 1769 | A floating-point operation on the RPC server caused a division by zero. [RPC_S_FP_DIV_ZERO (0x6E9)] |
| Error code 1770 | A floating-point underflow occurred on the RPC server. [RPC_S_FP_UNDERFLOW (0x6EA)] |
| Error code 1771 | A floating point overflow occurred on the RPC server. [RPC_S_FP_OVERFLOW (0x6EB)] |
| Error code 1772 | The list of RPC servers available for binding to automated handles has been exhausted. [RPC_X_NO_MORE_ENTRIES (0x6EC)] |
| Error code 1773 | The character translation table file could not be opened. [RPC_X_SS_CHAR_TRANS_OPEN_FAIL (0x6ED)] |
| Error code 1774 | The file containing the character translation table has less than 512 bytes. [RPC_X_SS_CHAR_TRANS_SHORT_FILE (0x6EE)] |
| Error code 1775 | An empty context pointer was passed from the client to the host during a remote procedure call. [RPC_X_SS_IN_NULL_CONTEXT (0x6EF)] |
| Error code 1777 | The context pointer changed during a remote procedure call. [RPC_X_SS_CONTEXT_DAMAGED (0x6F1)] |
| Error code 1778 | The binding handles passed to a remote procedure call do not match. [RPC_X_SS_HANDLES_MISMATCH (0x6F2)] |
| Error code 1779 | The stub routine was unable to get the remote procedure call handle. [RPC_X_SS_CANNOT_GET_CALL_HANDLE (0x6F3)] |
| Error code 1780 | A null reference pointer was passed to the stub. [RPC_X_NULL_REF_POINTER (0x6F4)] |
| Error code 1781 | Enum value out of range. [RPC_X_ENUM_VALUE_OUT_OF_RANGE (0x6F5)] |
| Error code 1782 | The byte count is too small. [RPC_X_BYTE_COUNT_TOO_SMALL (0x6F6)] |
| Error code 1783 | The stub received bad data. [RPC_X_BAD_STUB_DATA (0x6F7)] |
| Error code 1784 | The provided user buffer is invalid for the requested operation. [ERROR_INVALID_USER_BUFFER (0x6F8)] |
| Error code 1785 | The disk media is not recognized. It may not be formatted. [ERROR_UNRECOGNIZED_MEDIA (0x6F9)] |
| Error code 1786 | The workstation does not have a trust secret. [ERROR_NO_TRUST_LSA_SECRET (0x6FA)] |
| Error code 1787 | The security database on the server does not contain a computer account for this workstation's trust relationship. [ERROR_NO_TRUST_SAM_ACCOUNT (0x6FB)] |
| Error code 1788 | The trust relationship between the primary domain and the trusted domain failed. [ERROR_TRUSTED_DOMAIN_FAILURE (0x6FC)] |
| Error code 1789 | The trust relationship between this workstation and the primary domain failed. [ERROR_TRUSTED_RELATIONSHIP_FAILURE (0x6FD)] |
| Error code 1790 | Network login failed. [ERROR_TRUST_FAILURE (0x6FE)] |
| Error code 1791 | A remote procedure call is already in progress for this thread. [RPC_S_CALL_IN_PROGRESS (0x6FF)] |
| Error code 1792 | An attempt was made to log in, but the network logon service was not started. [ERROR_NETLOGON_NOT_STARTED (0x700)] |
| Error code 1793 | The user account has expired. [ERROR_ACCOUNT_EXPIRED (0x701)] |
| Error code 1794 | The redirector is in use and cannot be unloaded. [ERROR_REDIRECTOR_HAS_OPEN_HANDLES (0x702)] |
| Error code 1795 | The specified printer driver is already installed. [ERROR_PRINTER_DRIVER_ALREADY_INSTALLED (0x703)] |
| Error code 1796 | The specified port is unknown. [ERROR_UNKNOWN_PORT (0x704)] |
| Error code 1797 | Unknown printer driver. [ERROR_UNKNOWN_PRINTER_DRIVER (0x705)] |
| Error code 1798 | Unknown print processor. [ERROR_UNKNOWN_PRINTPROCESSOR (0x706)] |
| Error code 1799 | The specified separator file is invalid. [ERROR_INVALID_SEPARATOR_FILE (0x707)] |
| Error code 1800 | The specified priority is invalid. [ERROR_INVALID_PRIORITY (0x708)] |
| Error code 1801 | The printer name is invalid. [ERROR_INVALID_PRINTER_NAME (0x709)] |
| Error code 1802 | The printer already exists. [ERROR_PRINTER_ALREADY_EXISTS (0x70A)] |
| Error code 1803 | Assist with breathing if needed. [ERROR_INVALID_PRINTER_COMMAND (0x70B)] |
| Error code 1804 | The specified data type is invalid. [ERROR_INVALID_DATATYPE (0x70C)] |
| Error code 1805 | The specified environment is invalid. [ERROR_INVALID_ENVIRONMENT (0x70D)] |
| Error code 1806 | There are no more bindings. [RPC_S_NO_MORE_BINDINGS (0x70E)] |
| Error code 1807 | The account being used is an interdomain trust account. Use your global user account or your local user account to access this server. [ERROR_NOLOGON_INTERDOMAIN_TRUST_ACCOUNT (0x70F)] |
| Error code 1808 | The account being used is a computer account. Use your global user account or local user account to access this server. [ERROR_NOLOGON_WORKSTATION_TRUST_ACCOUNT (0x710)] |
| Error code 1809 | The account being used is a server trust account. Use your global user account or local user account to access this server. [ERROR_NOLOGON_SERVER_TRUST_ACCOUNT (0x711)] |
| Error code 1810 | The name or security identifier (SID) for the specified domain is inconsistent with the trust information for this domain. [ERROR_DOMAIN_TRUST_INCONSISTENT (0x712)] |
| Error code 1811 | The server is in use and cannot be unloaded. [ERROR_SERVER_HAS_OPEN_HANDLES (0x713)] |
| Error code 1812 | The specified image file does not contain a resource section. [ERROR_RESOURCE_DATA_NOT_FOUND (0x714)] |
| Error code 1813 | The specified resource type cannot be found in the image file. [ERROR_RESOURCE_TYPE_NOT_FOUND (0x715)] |
| Error code 1814 | The specified resource name cannot be found in the image file. [ERROR_RESOURCE_NAME_NOT_FOUND (0x716)] |
| Error code 1815 | The specified resource language ID could not be found in the image file. [ERROR_RESOURCE_LANG_NOT_FOUND (0x717)] |
| Error code 1816 | There is not enough quota available to process this command. [ERROR_NOT_ENOUGH_QUOTA (0x718)] |
| Error code 1817 | No interfaces registered. [RPC_S_NO_INTERFACES (0x719)] |
| Error code 1818 | The remote procedure call was canceled. [RPC_S_CALL_CANCELLED (0x71A)] |
| Error code 1819 | The binding handle does not contain all the required information. [RPC_S_BINDING_INCOMPLETE (0x71B)] |
| Error code 1820 | A communications failure occurred during a remote procedure call. [RPC_S_COMM_FAILURE (0x71C)] |
| Error code 1821 | The requested authentication level is not supported. [RPC_S_UNSUPPORTED_AUTHN_LEVEL (0x71D)] |
| Error code 1822 | No principal name registered. [RPC_S_NO_PRINC_NAME (0x71E)] |
| Error code 1823 | The specified error is not a valid Windows RPC error code. [RPC_S_NOT_RPC_ERROR (0x71F)] |
| Error code 1824 | A valid UUID has been assigned only on this computer. [RPC_S_UUID_LOCAL_ONLY (0x720)] |
| Error code 1825 | A specific error occurred in the security package. [RPC_S_SEC_PKG_ERROR (0x721)] |
| Error code 1826 | The topic was not canceled. [RPC_S_NOT_CANCELLED (0x722)] |
| Error code 1827 | Invalid operation on the encryption/decryption handle. [RPC_X_INVALID_ES_ACTION (0x723)] |
| Error code 1828 | Incompatible version of serialization package. [RPC_X_WRONG_ES_VERSION (0x724)] |
| Error code 1829 | Incompatible version of RPC stub. [RPC_X_WRONG_STUB_VERSION (0x725)] |
| Error code 1830 | The RPC pipe object is invalid or corrupted. [RPC_X_INVALID_PIPE_OBJECT (0x726)] |
| Error code 1831 | An invalid operation was attempted on an RPC route object. [RPC_X_WRONG_PIPE_ORDER (0x727)] |
| Error code 1832 | Unsupported RPC pipe version. [RPC_X_WRONG_PIPE_VERSION (0x728)] |
| Error code 1833 | The HTTP proxy server refused the connection due to cookie authentication failure. [RPC_S_COOKIE_AUTH_FAILED (0x729)] |
| Error code 1898 | Group member not found. [RPC_S_GROUP_MEMBER_NOT_FOUND (0x76A)] |
| Error code 1899 | The specified database entry could not be created for the endpoint. [EPT_S_CANT_CREATE (0x76B)] |
| Error code 1900 | The object's universally unique identifier (UUID) is a zero UUID. [RPC_S_INVALID_OBJECT (0x76C)] |
| Error code 1901 | The specified time is invalid. [ERROR_INVALID_TIME (0x76D)] |
| Error code 1902 | The specified form name is invalid. [ERROR_INVALID_FORM_NAME (0x76E)] |
| Error code 1903 | The specified form size is invalid. [ERROR_INVALID_FORM_SIZE (0x76F)] |
| Error code 1904 | The specified printer handler is already waiting on [ERROR_ALREADY_WAITING (0x770)] |
| Error code 1905 | The specified printer has been deleted. [ERROR_PRINTER_DELETED (0x771)] |
| Error code 1906 | The printer state is invalid. [ERROR_INVALID_PRINTER_STATE (0x772)] |
| Error code 1907 | The user password must be changed before logging in for the first time. [ERROR_PASSWORD_MUST_CHANGE (0x773)] |
| Error code 1908 | The domain controller for this domain could not be found. [ERROR_DOMAIN_CONTROLLER_NOT_FOUND (0x774)] |
| Error code 1909 | The indicated account is currently locked and may not be logged in. [ERROR_ACCOUNT_LOCKED_OUT (0x775)] |
| Error code 1910 | The specified object source was not found. [OR_INVALID_OXID (0x776)] |
| Error code 1911 | The specified object was not found. [OR_INVALID_OID (0x777)] |
| Error code 1912 | The specified object resolver set was not found. [OR_INVALID_SET (0x778)] |
| Error code 1913 | Some data remains to be sent in the request buffer. [RPC_S_SEND_INCOMPLETE (0x779)] |
| Error code 1914 | Invalid asynchronous remote procedure call handle. [RPC_S_INVALID_ASYNC_HANDLE (0x77A)] |
| Error code 1915 | Invalid asynchronous RPC call handle for this operation. [RPC_S_INVALID_ASYNC_CALL (0x77B)] |
| Error code 1916 | The RPC pipe object has already been closed. [RPC_X_PIPE_CLOSED (0x77C)] |
| Error code 1917 | The RPC call completed before all pipes were processed. [RPC_X_PIPE_DISCIPLINE_ERROR (0x77D)] |
| Error code 1918 | No more data is available from the RPC pipe. [RPC_X_PIPE_EMPTY (0x77E)] |
| Error code 1919 | No site name is available for this device. [ERROR_NO_SITENAME (0x77F)] |
| Error code 1920 | The file cannot be accessed by the system. [ERROR_CANT_ACCESS_FILE (0x780)] |
| Error code 1921 | The system cannot resolve the file name. [ERROR_CANT_RESOLVE_FILENAME (0x781)] |
| Error code 1922 | The input is not of the expected type. [RPC_S_ENTRY_TYPE_MISMATCH (0x782)] |
| Error code 1923 | Not all object UUIDs could be exported to the specified entry. [RPC_S_NOT_ALL_OBJS_EXPORTED (0x783)] |
| Error code 1924 | The interface cannot be exported to the specified entry. [RPC_S_INTERFACE_NOT_EXPORTED (0x784)] |
| Error code 1925 | The specified profile entry could not be added. [RPC_S_PROFILE_NOT_ADDED (0x785)] |
| Error code 1926 | The specified profile item could not be added. [RPC_S_PRF_ELT_NOT_ADDED (0x786)] |
| Error code 1927 | The specified profile item cannot be removed. [RPC_S_PRF_ELT_NOT_REMOVED (0x787)] |
| Error code 1928 | The group element could not be added. [RPC_S_GRP_ELT_NOT_ADDED (0x788)] |
| Error code 1929 | The group element cannot be removed. [RPC_S_GRP_ELT_NOT_REMOVED (0x789)] |
| Error code 1930 | The printer driver is incompatible with the policy enabled on your computer that blocks NT 4.0 drivers. [ERROR_KM_DRIVER_BLOCKED (0x78A)] |
| Error code 1931 | The context has expired and can no longer be used. [ERROR_CONTEXT_EXPIRED (0x78B)] |
| Error code 1932 | The delegated trust establishment quota for the current user has been exceeded. [ERROR_PER_USER_TRUST_QUOTA_EXCEEDED (0x78C)] |
| Error code 1933 | The total delegated trust creation quota has been exceeded. [ERROR_ALL_USER_TRUST_QUOTA_EXCEEDED (0x78D)] |
| Error code 1934 | The current user's delegated trust deletion quota has been exceeded. [ERROR_USER_DELETE_TRUST_QUOTA_EXCEEDED (0x78E)] |
| Error code 1935 | login failed |
| Error code 1936 | Remote connections to the Print Spooler are blocked by a policy set on your device. [ERROR_REMOTE_PRINT_CONNECTIONS_BLOCKED (0x790)] |
| Error code 1937 | Authentication failed because NTLM authentication is disabled. [ERROR_NTLM_BLOCKED (0x791)] |
| Error code 2000 | Invalid pixel format. [ERROR_INVALID_PIXEL_FORMAT (0x7D0)] |
| Error code 2001 | The specified driver is invalid. [ERROR_BAD_DRIVER (0x7D1)] |
| Error code 2002 | The window style or class attribute is invalid for this operation. [ERROR_INVALID_WINDOW_STYLE (0x7D2)] |
| Error code 2003 | The requested profile operation is not supported. [ERROR_METAFILE_NOT_SUPPORTED (0x7D3)] |
| Error code 2004 | The requested conversion operation is not supported. [ERROR_TRANSFORM_NOT_SUPPORTED (0x7D4)] |
| Error code 2005 | The requested clipping operation is not supported. [ERROR_CLIPPING_NOT_SUPPORTED (0x7D5)] |
| Error code 2010 | The specified color management module is invalid. [ERROR_INVALID_CMM (0x7DA)] |
| Error code 2011 | The specified color profile is invalid. [ERROR_INVALID_PROFILE (0x7DB)] |
| Error code 2012 | The specified tag was not found. [ERROR_TAG_NOT_FOUND (0x7DC)] |
| Error code 2013 | The requested tag does not exist. [ERROR_TAG_NOT_PRESENT (0x7DD)] |
| Error code 2014 | The specified tag already exists. [ERROR_DUPLICATE_TAG (0x7DE)] |
| Error code 2015 | The specified color profile is not associated with the specified device. [ERROR_PROFILE_NOT_ASSOCIATED_WITH_DEVICE (0x7DF)] |
| Error code 2016 | The specified color profile was not found. [ERROR_PROFILE_NOT_FOUND (0x7E0)] |
| Error code 2017 | The specified color space is invalid. [ERROR_INVALID_COLORSPACE (0x7E1)] |
| Error code 2018 | Image color management is not enabled. [ERROR_ICM_NOT_ENABLED (0x7E2)] |
| Error code 2019 | An error occurred while deleting the color transformation. [ERROR_DELETING_ICM_XFORM (0x7E3)] |
| Error code 2020 | The specified color transformation is invalid. [ERROR_INVALID_TRANSFORM (0x7E4)] |
| Error code 2021 | The specified transformation does not match the bitmap color space. [ERROR_COLORSPACE_MISMATCH (0x7E5)] |
| Error code 2022 | The specified color index named does not exist in the profile. [ERROR_INVALID_COLORINDEX (0x7E6)] |
| Error code 2023 | The specified profile is for a device of a different type than the specified device. [ERROR_PROFILE_DOES_NOT_MATCH_DEVICE (0x7E7)] |
| Error code 2108 | The network connection was successful, but the user was prompted for a password other than the one originally specified. [ERROR_CONNECTED_OTHER_PASSWORD (0x83C)] |
| Error code 2109 | The network connection was successfully established using the default credentials. [ERROR_CONNECTED_OTHER_PASSWORD_DEFAULT (0x83D)] |
| Error code 2202 | The specified username is invalid. [ERROR_BAD_USERNAME (0x89A)] |
| Error code 2250 | This network connection does not exist. [ERROR_NOT_CONNECTED (0x8CA)] |
| Error code 2401 | This network connection has open files or pending requests. [ERROR_OPEN_FILES (0x961)] |
| Error code 2402 | Active connections still exist. [ERROR_ACTIVE_CONNECTIONS (0x962)] |
| Error code 2404 | The device is in use by an active process and cannot be disconnected. [ERROR_DEVICE_IN_USE (0x964)] |
| Error code 3000 | The specified print monitor is unknown. [ERROR_UNKNOWN_PRINT_MONITOR (0xBB8)] |
| Error code 3001 | The specified printer driver is currently in use. [ERROR_PRINTER_DRIVER_IN_USE (0xBB9)] |
| Error code 3002 | The spool file was not found. [ERROR_SPOOL_FILE_NOT_FOUND (0xBBA)] |
| Error code 3003 | The StartDocPrinter call was not issued. [ERROR_SPL_NO_STARTDOC (0xBBB)] |
| Error code 3004 | AddJob call not issued. [ERROR_SPL_NO_ADDJOB (0xBBC)] |
| Error code 3005 | The specified print processor is already installed. [ERROR_PRINT_PROCESSOR_ALREADY_INSTALLED (0xBBD)] |
| Error code 3006 | The specified print monitor is already installed. [ERROR_PRINT_MONITOR_ALREADY_INSTALLED (0xBBE)] |
| Error code 3007 | The specified print monitor does not have the required functionality. [ERROR_INVALID_PRINT_MONITOR (0xBBF)] |
| Error code 3008 | The specified print monitor is currently in use. [ERROR_PRINT_MONITOR_IN_USE (0xBC0)] |
| Error code 3009 | The requested operation is not allowed when there are jobs in the printer queue. [ERROR_PRINTER_HAS_JOBS_QUEUED (0xBC1)] |
| Error code 3010 | The requested operation was successful. The changes will not take effect until the system is restarted. [ERROR_SUCCESS_REBOOT_REQUIRED (0xBC2)] |
| Error code 3011 | The requested operation was successful. Changes will not take effect until the service is restarted. [ERROR_SUCCESS_RESTART_REQUIRED (0xBC3)] |
| Error code 3012 | No printers found. [ERROR_PRINTER_NOT_FOUND (0xBC4)] |
| Error code 3013 | The printer driver is known to be untrusted. [ERROR_PRINTER_DRIVER_WARNED (0xBC5)] |
| Error code 3014 | The printer driver is known to be harmful to the system. [ERROR_PRINTER_DRIVER_BLOCKED (0xBC6)] |
| Error code 3015 | The specified printer driver package is currently in use. [ERROR_PRINTER_DRIVER_PACKAGE_IN_USE (0xBC7)] |
| Error code 3016 | The core driver package required by the printer driver package could not be found. [ERROR_CORE_DRIVER_PACKAGE_NOT_FOUND (0xBC8)] |
| Error code 3017 | The requested operation failed. A system restart is required to restore the changes made. [ERROR_FAIL_REBOOT_REQUIRED (0xBC9)] |
| Error code 3018 | The requested operation failed. A system reboot has been initiated to restore the changes made. [ERROR_FAIL_REBOOT_INITIATED (0xBCA)] |
| Error code 3019 | The specified printer driver was not found on the system and needs to be downloaded. [ERROR_PRINTER_DRIVER_DOWNLOAD_NEEDED (0xBCB)] |
| Error code 3020 | The requested print job failed to print. A print system update requires the job to be resubmitted. [ERROR_PRINT_JOB_RESTART_REQUIRED (0xBCC)] |
| Error code 3950 | Reissue the specified operation as a cached I/O operation. [ERROR_IO_REISSUE_AS_CACHED (0xF6E)] |
| Error code 4000 | WINS encountered an error while processing the command. [ERROR_WINS_INTERNAL (0xFA0)] |
| Error code 4001 | Local WINS cannot be deleted. [ERROR_CAN_NOT_DEL_LOCAL_WINS (0xFA1)] |
| Error code 4002 | Failed to import from file. [ERROR_STATIC_INIT (0xFA2)] |
| Error code 4003 | Backup failed. Has a full backup been performed before? [ERROR_INC_BACKUP (0xFA3)] |
| Error code 4004 | Backup failed. Check the directory the database is backed up to. [ERROR_FULL_BACKUP (0xFA4)] |
| Error code 4005 | The name does not exist in the WINS database. [ERROR_REC_NON_EXISTENT (0xFA5)] |
| Error code 4006 | Replication with an unconfigured partner is not allowed. [ERROR_RPL_NOT_ALLOWED (0xFA6)] |
| Error code 4100 | The DHCP client has obtained an IP address that is already in use on the network. The local interface will be disabled until the DHCP client can obtain a new address. [ERROR_DHCP_ADDRESS_CONFLICT (0x1004)] |
| Error code 4200 | The GUID passed was not recognized as valid by the WMI data provider. [ERROR_WMI_GUID_NOT_FOUND (0x1068)] |
| Error code 4201 | The instance name passed was not recognized as valid by the WMI data provider. [ERROR_WMI_INSTANCE_NOT_FOUND (0x1069)] |
| Error code 4202 | The passed data item ID was not recognized as valid by the WMI data provider. [ERROR_WMI_ITEMID_NOT_FOUND (0x106A)] |
| Error code 4203 | The WMI request could not be completed and must be retried. [ERROR_WMI_TRY_AGAIN (0x106B)] |
| Error code 4204 | The WMI data provider could not be located. [ERROR_WMI_DP_NOT_FOUND (0x106C)] |
| Error code 4205 | The WMI data provider references an instance group that is not registered. [ERROR_WMI_UNRESOLVED_INSTANCE_REF (0x106D)] |
| Error code 4206 | A WMI data block or event notification is already enabled. [ERROR_WMI_ALREADY_ENABLED (0x106E)] |
| Error code 4207 | The WMI data block is no longer available. [ERROR_WMI_GUID_DISCONNECTED (0x106F)] |
| Error code 4208 | WMI data service is unavailable. [ERROR_WMI_SERVER_UNAVAILABLE (0x1070)] |
| Error code 4209 | The WMI data provider failed to perform the request. [ERROR_WMI_DP_FAILED (0x1071)] |
| Error code 4210 | WMI MOF information is invalid. [ERROR_WMI_INVALID_MOF (0x1072)] |
| Error code 4211 | Invalid WMI registration information. [ERROR_WMI_INVALID_REGINFO (0x1073)] |
| Error code 4212 | A WMI data block or event notification has already been disabled. [ERROR_WMI_ALREADY_DISABLED (0x1074)] |
| Error code 4213 | The WMI data item or data block is read-only. [ERROR_WMI_READ_ONLY (0x1075)] |
| Error code 4214 | The WMI data item or data block could not be changed. [ERROR_WMI_SET_FAILURE (0x1076)] |
| Error code 4300 | The media ID does not represent a valid medium. [ERROR_INVALID_MEDIA (0x10CC)] |
| Error code 4301 | The library ID does not represent a valid library. [ERROR_INVALID_LIBRARY (0x10CD)] |
| Error code 4302 | The media pool ID does not represent a valid media pool. [ERROR_INVALID_MEDIA_POOL (0x10CE)] |
| Error code 4303 | The drive and medium are incompatible or located in different libraries. [ERROR_DRIVE_MEDIA_MISMATCH (0x10CF)] |
| Error code 4304 | The media is currently in an offline library and must be online to perform this operation. [ERROR_MEDIA_OFFLINE (0x10D0)] |
| Error code 4305 | The operation cannot be performed on an offline library. [ERROR_LIBRARY_OFFLINE (0x10D1)] |
| Error code 4306 | The library drive or media pool is empty. [ERROR_EMPTY (0x10D2)] |
| Error code 4307 | The library drive or media pool must be empty to perform this operation. [ERROR_NOT_EMPTY (0x10D3)] |
| Error code 4308 | There is currently no media available in this media pool or library. [ERROR_MEDIA_UNAVAILABLE (0x10D4)] |
| Error code 4309 | The resource required for this operation has been disabled. [ERROR_RESOURCE_DISABLED (0x10D5)] |
| Error code 4310 | The media ID does not represent a valid cleaner. [ERROR_INVALID_CLEANER (0x10D6)] |
| Error code 4311 | The drive cannot be cleaned or does not support cleaning. [ERROR_UNABLE_TO_CLEAN (0x10D7)] |
| Error code 4312 | The object ID does not represent a valid object. [ERROR_OBJECT_NOT_FOUND (0x10D8)] |
| Error code 4313 | Unable to read from or write to the database. [ERROR_DATABASE_FAILURE (0x10D9)] |
| Error code 4314 | The database is full. [ERROR_DATABASE_FULL (0x10DA)] |
| Error code 4315 | The medium is incompatible with the device or media pool. [ERROR_MEDIA_INCOMPATIBLE (0x10DB)] |
| Error code 4316 | The resource required for this operation does not exist. [ERROR_RESOURCE_NOT_PRESENT (0x10DC)] |
| Error code 4317 | Invalid operation ID. [ERROR_INVALID_OPERATION (0x10DD)] |
| Error code 4318 | The media is not mounted or ready to use. [ERROR_MEDIA_NOT_AVAILABLE (0x10DE)] |
| Error code 4319 | The device is not ready for use. [ERROR_DEVICE_NOT_AVAILABLE (0x10DF)] |
| Error code 4320 | The operator or administrator rejected the request. [ERROR_REQUEST_REFUSED (0x10E0)] |
| Error code 4321 | The drive ID does not represent a valid drive. [ERROR_INVALID_DRIVE_OBJECT (0x10E1)] |
| Error code 4322 | The library is full. No slot is available for use. [ERROR_LIBRARY_FULL (0x10E2)] |
| Error code 4323 | The transport cannot access the medium. [ERROR_MEDIUM_NOT_ACCESSIBLE (0x10E3)] |
| Error code 4324 | Unable to load the medium into the drive. [ERROR_UNABLE_TO_LOAD_MEDIUM (0x10E4)] |
| Error code 4325 | The drive state could not be recovered. [ERROR_UNABLE_TO_INVENTORY_DRIVE (0x10E5)] |
| Error code 4326 | Unable to retrieve slot state. [ERROR_UNABLE_TO_INVENTORY_SLOT (0x10E6)] |
| Error code 4327 | The transport status could not be recovered. [ERROR_UNABLE_TO_INVENTORY_TRANSPORT (0x10E7)] |
| Error code 4328 | The transport cannot be used because it is already in use. [ERROR_TRANSPORT_FULL (0x10E8)] |
| Error code 4329 | The injection/ejection port could not be opened or closed. [ERROR_CONTROLLING_IEPORT (0x10E9)] |
| Error code 4330 | Unable to eject the media because it is in the drive. [ERROR_UNABLE_TO_EJECT_MOUNTED_MEDIA (0x10EA)] |
| Error code 4331 | Cleaner slot already reserved. [ERROR_CLEANER_SLOT_SET (0x10EB)] |
| Error code 4332 | The cleaner slot is not reserved. [ERROR_CLEANER_SLOT_NOT_SET (0x10EC)] |
| Error code 4333 | The cleaner cartridge has performed the maximum number of drive cleans. [ERROR_CLEANER_CARTRIDGE_SPENT (0x10ED)] |
| Error code 4334 | Unexpected broker ID. [ERROR_UNEXPECTED_OMID (0x10EE)] |
| Error code 4335 | The last remaining item in this collection or resource cannot be deleted. [ERROR_CANT_DELETE_LAST_ITEM (0x10EF)] |
| Error code 4336 | The message submitted exceeds the maximum size allowed for this parameter. [ERROR_MESSAGE_EXCEEDS_MAX_SIZE (0x10F0)] |
| Error code 4337 | The volume contains system or paging files. [ERROR_VOLUME_CONTAINS_SYS_FILES (0x10F1)] |
| Error code 4338 | The media type cannot be removed from this library because at least one drive in the library reports can support this media type. [ERROR_INDIGENOUS_TYPE (0x10F2)] |
| Error code 4339 | This offline media cannot be mounted on this system because there are no enabled drives that can be used. [ERROR_NO_SUPPORTING_DRIVES (0x10F3)] |
| Error code 4340 | There is a cleaner cartridge in the tape library. [ERROR_CLEANER_CARTRIDGE_INSTALLED (0x10F4)] |
| Error code 4341 | The injector/output port cannot be used because it is not empty. [ERROR_IEPORT_FULL (0x10F5)] |
| Error code 4350 | The file is currently unavailable for use on this computer. [ERROR_FILE_OFFLINE (0x10FE)] |
| Error code 4351 | The Remote Storage service is not running at this time. [ERROR_REMOTE_STORAGE_NOT_ACTIVE (0x10FF)] |
| Error code 4352 | The Remote Storage Service encountered a media error. [ERROR_REMOTE_STORAGE_MEDIA_ERROR (0x1100)] |
| Error code 4390 | The file or directory is not a reparse point. [ERROR_NOT_A_REPARSE_POINT (0x1126)] |
| Error code 4391 | The reparse point attribute cannot be set because it conflicts with an existing attribute. [ERROR_REPARSE_ATTRIBUTE_CONFLICT (0x1127)] |
| Error code 4392 | The data in the reparse point buffer is invalid. [ERROR_INVALID_REPARSE_DATA (0x1128)] |
| Error code 4393 | The tag in the reparse point buffer is invalid. [ERROR_REPARSE_TAG_INVALID (0x1129)] |
| Error code 4394 | There is a mismatch between the tag specified in the request and the tag at the reparse point. [ERROR_REPARSE_TAG_MISMATCH (0x112A)] |
| Error code 4500 | There is no single instance storage available on this volume. [ERROR_VOLUME_NOT_SIS_ENABLED (0x1194)] |
| Error code 5001 | The operation cannot be completed because other resources depend on this resource. [ERROR_DEPENDENT_RESOURCE_EXISTS (0x1389)] |
| Error code 5002 | The cluster resource dependency could not be found. [ERROR_DEPENDENCY_NOT_FOUND (0x138A)] |
| Error code 5003 | The cluster resource cannot be made dependent on the specified resource because it is already a dependent. [ERROR_DEPENDENCY_ALREADY_EXISTS (0x138B)] |
| Error code 5004 | The block resource is offline. [ERROR_RESOURCE_NOT_ONLINE (0x138C)] |
| Error code 5005 | The cluster node is not available for this operation. [ERROR_HOST_NODE_NOT_AVAILABLE (0x138D)] |
| Error code 5006 | The block resource is not available. [ERROR_RESOURCE_NOT_AVAILABLE (0x138E)] |
| Error code 5007 | The cluster resource could not be found. [ERROR_RESOURCE_NOT_FOUND (0x138F)] |
| Error code 5008 | The cluster is being shut down. [ERROR_SHUTDOWN_CLUSTER (0x1390)] |
| Error code 5009 | A cluster node cannot be evicted from the cluster unless the node is down or the last node. [ERROR_CANT_EVICT_ACTIVE_NODE (0x1391)] |
| Error code 5010 | The object already exists. [ERROR_OBJECT_ALREADY_EXISTS (0x1392)] |
| Error code 5011 | The object already exists in the list. [ERROR_OBJECT_IN_LIST (0x1393)] |
| Error code 5012 | The cluster group is not available for any new requests. [ERROR_GROUP_NOT_AVAILABLE (0x1394)] |
| Error code 5013 | The cluster group cannot be found. [ERROR_GROUP_NOT_FOUND (0x1395)] |
| Error code 5014 | The operation could not be completed because the cluster group is not online. [ERROR_GROUP_NOT_ONLINE (0x1396)] |
| Error code 5015 | The operation failed because the specified cluster node is not the owner of the resource or the node is not a potential owner of the resource. [ERROR_HOST_NODE_NOT_RESOURCE_OWNER (0x1397)] |
| Error code 5016 | The operation failed because the specified cluster node is not the group owner or the node is not a potential group owner. [ERROR_HOST_NODE_NOT_GROUP_OWNER (0x1398)] |
| Error code 5017 | The cluster resource could not be created in the specified resource monitor. [ERROR_RESMON_CREATE_FAILED (0x1399)] |
| Error code 5018 | The block resource could not be brought online by the resource monitor. [ERROR_RESMON_ONLINE_FAILED (0x139A)] |
| Error code 5019 | The operation could not be completed because the cluster resource is online. [ERROR_RESOURCE_ONLINE (0x139B)] |
| Error code 5020 | The cluster resource could not be deleted or brought offline because it is a quorum resource. [ERROR_QUORUM_RESOURCE (0x139C)] |
| Error code 5021 | The cluster could not make the specified resource a quota resource because it is unable to be a quota resource. [ERROR_NOT_QUORUM_CAPABLE (0x139D)] |
| Error code 5022 | The cluster program is shutting down. [ERROR_CLUSTER_SHUTTING_DOWN (0x139E)] |
| Error code 5023 | The group or resource is not in the correct state to perform the requested operation. [ERROR_INVALID_STATE (0x139F)] |
| Error code 5024 | The properties are stored, but all changes will not take effect until the next time the resource is brought online. [ERROR_RESOURCE_PROPERTIES_STORED (0x13A0)] |
| Error code 5025 | The cluster could not make the specified resource a quota resource because it does not belong to a shared storage class. [ERROR_NOT_QUORUM_CLASS (0x13A1)] |
| Error code 5026 | The cluster resource cannot be deleted because it is a core resource. [ERROR_CORE_RESOURCE (0x13A2)] |
| Error code 5027 | The quorum resource failed to go online. [ERROR_QUORUM_RESOURCE_ONLINE_FAILED (0x13A3)] |
| Error code 5028 | The quota log could not be created or loaded successfully. [ERROR_QUORUMLOG_OPEN_FAILED (0x13A4)] |
| Error code 5029 | The cluster log is corrupted. [ERROR_CLUSTERLOG_CORRUPT (0x13A5)] |
| Error code 5030 | The log could not be written to the cluster log because it exceeds the maximum size. [ERROR_CLUSTERLOG_RECORD_EXCEEDS_MAXSIZE (0x13A6)] |
| Error code 5031 | The cluster log exceeds its maximum size. [ERROR_CLUSTERLOG_EXCEEDS_MAXSIZE (0x13A7)] |
| Error code 5032 | No checkpoint record was found in the cluster log. [ERROR_CLUSTERLOG_CHKPOINT_NOT_FOUND (0x13A8)] |
| Error code 5033 | The minimum disk space required for logging is not available. [ERROR_CLUSTERLOG_NOT_ENOUGH_SPACE (0x13A9)] |
| Error code 5034 | The cluster node failed to take control of the quota resource because the resource is owned by another active node. [ERROR_QUORUM_OWNER_ALIVE (0x13AA)] |
| Error code 5035 | The cluster network is not available for this operation. [ERROR_NETWORK_NOT_AVAILABLE (0x13AB)] |
| Error code 5036 | The cluster node is not available for this operation. [ERROR_NODE_NOT_AVAILABLE (0x13AC)] |
| Error code 5037 | All cluster nodes must be running to perform this operation. [ERROR_ALL_NODES_NOT_AVAILABLE (0x13AD)] |
| Error code 5038 | Cluster resource failed. [ERROR_RESOURCE_FAILED (0x13AE)] |
| Error code 5039 | The cluster node is invalid. [ERROR_CLUSTER_INVALID_NODE (0x13AF)] |
| Error code 5040 | The cluster node already exists. [ERROR_CLUSTER_NODE_EXISTS (0x13B0)] |
| Error code 5041 | The node is in the process of joining the cluster. [ERROR_CLUSTER_JOIN_IN_PROGRESS (0x13B1)] |
| Error code 5042 | Cluster node not found. [ERROR_CLUSTER_NODE_NOT_FOUND (0x13B2)] |
| Error code 5043 | No cluster local node information was found. [ERROR_CLUSTER_LOCAL_NODE_NOT_FOUND (0x13B3)] |
| Error code 5044 | The cluster network already exists. [ERROR_CLUSTER_NETWORK_EXISTS (0x13B4)] |
| Error code 5045 | The cluster network was not found. [ERROR_CLUSTER_NETWORK_NOT_FOUND (0x13B5)] |
| Error code 5046 | The cluster network interface already exists. [ERROR_CLUSTER_NETINTERFACE_EXISTS (0x13B6)] |
| Error code 5047 | The cluster network interface was not found. [ERROR_CLUSTER_NETINTERFACE_NOT_FOUND (0x13B7)] |
| Error code 5048 | The cluster request is invalid for this object. [ERROR_CLUSTER_INVALID_REQUEST (0x13B8)] |
| Error code 5049 | The cluster network provider is invalid. [ERROR_CLUSTER_INVALID_NETWORK_PROVIDER (0x13B9)] |
| Error code 5050 | The cluster node is down. [ERROR_CLUSTER_NODE_DOWN (0x13BA)] |
| Error code 5051 | The cluster node cannot be reached. [ERROR_CLUSTER_NODE_UNREACHABLE (0x13BB)] |
| Error code 5052 | The cluster node is not a member of the cluster. [ERROR_CLUSTER_NODE_NOT_MEMBER (0x13BC)] |
| Error code 5053 | The cluster join process is not in progress. [ERROR_CLUSTER_JOIN_NOT_IN_PROGRESS (0x13BD)] |
| Error code 5054 | The cluster network is invalid. [ERROR_CLUSTER_INVALID_NETWORK (0x13BE)] |
| Error code 5056 | The cluster node is up. [ERROR_CLUSTER_NODE_UP (0x13C0)] |
| Error code 5057 | The cluster IP address is already in use. [ERROR_CLUSTER_IPADDR_IN_USE (0x13C1)] |
| Error code 5058 | The cluster node has not been paused. [ERROR_CLUSTER_NODE_NOT_PAUSED (0x13C2)] |
| Error code 5059 | No cluster security context is available. [ERROR_CLUSTER_NO_SECURITY_CONTEXT (0x13C3)] |
| Error code 5060 | The cluster network is not configured for internal cluster communications. [ERROR_CLUSTER_NETWORK_NOT_INTERNAL (0x13C4)] |
| Error code 5061 | The cluster node already exists. [ERROR_CLUSTER_NODE_ALREADY_UP (0x13C5)] |
| Error code 5062 | The cluster node is already down. [ERROR_CLUSTER_NODE_ALREADY_DOWN (0x13C6)] |
| Error code 5063 | The cluster network is already online. [ERROR_CLUSTER_NETWORK_ALREADY_ONLINE (0x13C7)] |
| Error code 5064 | The cluster network is already offline. [ERROR_CLUSTER_NETWORK_ALREADY_OFFLINE (0x13C8)] |
| Error code 5065 | The cluster node is already a member of the cluster. [ERROR_CLUSTER_NODE_ALREADY_MEMBER (0x13C9)] |
| Error code 5066 | The cluster network is the only one configured for internal cluster communication between two or more active cluster nodes. The internal communication capability cannot be removed from the network. [ERROR_CLUSTER_LAST_INTERNAL_NETWORK (0x13CA)] |
| Error code 5067 | One or more cluster resources depend on the network to provide service to clients. Client access cannot be removed from the network. [ERROR_CLUSTER_NETWORK_HAS_DEPENDENTS (0x13CB)] |
| Error code 5068 | This operation cannot be performed on a cluster resource as a quorum resource. You may not bring the quorum resource offline or modify the list of potential owners. [ERROR_INVALID_OPERATION_ON_QUORUM (0x13CC)] |
| Error code 5069 | The cluster quorum resource is not allowed to have any dependencies. [ERROR_DEPENDENCY_NOT_ALLOWED (0x13CD)] |
| Error code 5070 | The cluster node has been paused. [ERROR_CLUSTER_NODE_PAUSED (0x13CE)] |
| Error code 5071 | The cluster resource could not be brought online. The owner node cannot operate this resource. [ERROR_NODE_CANT_HOST_RESOURCE (0x13CF)] |
| Error code 5072 | The cluster node is not ready to perform the requested operation. [ERROR_CLUSTER_NODE_NOT_READY (0x13D0)] |
| Error code 5073 | The cluster node is shutting down. [ERROR_CLUSTER_NODE_SHUTTING_DOWN (0x13D1)] |
| Error code 5074 | The cluster join operation was aborted. [ERROR_CLUSTER_JOIN_ABORTED (0x13D2)] |
| Error code 5075 | The cluster join operation failed due to incompatible software versions between the joining node and its sponsor. [ERROR_CLUSTER_INCOMPATIBLE_VERSIONS (0x13D3)] |
| Error code 5076 | This resource could not be created because the cluster has reached the maximum number of resources it can monitor. [ERROR_CLUSTER_MAXNUM_OF_RESOURCES_EXCEEDED (0x13D4)] |
| Error code 5077 | The system configuration changed during a cluster join or shape operation. The join or shape operation was aborted. [ERROR_CLUSTER_SYSTEM_CONFIG_CHANGED (0x13D5)] |
| Error code 5078 | The specified resource type was not found. [ERROR_CLUSTER_RESOURCE_TYPE_NOT_FOUND (0x13D6)] |
| Error code 5079 | The specified node does not support a resource of this type. This may be due to a version inconsistency or because the resource DLL is missing on this node. [ERROR_CLUSTER_RESTYPE_NOT_SUPPORTED (0x13D7)] |
| Error code 5080 | The specified resource name is not supported by this resource's DLL. This may be due to a corrupted (or altered) name provided to the resource's DLL. [ERROR_CLUSTER_RESNAME_NOT_FOUND (0x13D8)] |
| Error code 5081 | Unable to register any authentication packet with the RPC server. [ERROR_CLUSTER_NO_RPC_PACKAGES_REGISTERED (0x13D9)] |
| Error code 5082 | You cannot bring the group online because the group owner is not in the group's favorites list. To change the owner node for the group, move the group. [ERROR_CLUSTER_OWNER_NOT_IN_PREFLIST (0x13DA)] |
| Error code 5083 | The join operation failed because the cluster database sequence number has changed or is inconsistent with the vault node. This can happen during the join operation if the cluster database was changed during the join. [ERROR_CLUSTER_DATABASE_SEQMISMATCH (0x13DB)] |
| Error code 5084 | The resource monitor will not allow the failed operation to be executed while the resource is in its current state. This can happen if the resource is in a pending state. [ERROR_RESMON_INVALID_STATE (0x13DC)] |
| Error code 5085 | The non-cache token received a lock reservation request for global updates. [ERROR_CLUSTER_GUM_NOT_LOCKER (0x13DD)] |
| Error code 5086 | The elite disk could not be located by the cluster service. [ERROR_QUORUM_DISK_NOT_FOUND (0x13DE)] |
| Error code 5087 | The backed-up cluster database is likely corrupted. [ERROR_DATABASE_BACKUP_CORRUPT (0x13DF)] |
| Error code 5088 | A DFS root already exists on this cluster node. [ERROR_CLUSTER_NODE_ALREADY_HAS_DFS_ROOT (0x13E0)] |
| Error code 5089 | An attempt to modify a resource property failed because it conflicts with another existing property. [ERROR_RESOURCE_PROPERTY_UNCHANGEABLE (0x13E1)] |
| Error code 5890 | An operation was attempted that is incompatible with the current membership state of the node. [ERROR_CLUSTER_MEMBERSHIP_INVALID_STATE (0x1702)] |
| Error code 5891 | The quota resource does not contain a quota log. [ERROR_CLUSTER_QUORUMLOG_NOT_FOUND (0x1703)] |
| Error code 5892 | The membership operator has requested that the cluster service on this node be shut down. [ERROR_CLUSTER_MEMBERSHIP_HALT (0x1704)] |
| Error code 5893 | The join operation failed because the cluster instance ID of the joining node does not match the cluster instance ID of the sponsor node. [ERROR_CLUSTER_INSTANCE_ID_MISMATCH (0x1705)] |
| Error code 5894 | A cluster network matching the specified IP address could not be found. [ERROR_CLUSTER_NETWORK_NOT_FOUND_FOR_IP (0x1706)] |
| Error code 5895 | The actual data type for the site does not match the expected data type for the site. [ERROR_CLUSTER_PROPERTY_DATA_TYPE_MISMATCH (0x1707)] |
| Error code 5896 | The cluster node was successfully removed from the cluster, but the node was not cleaned up. To determine which cleanup steps failed and how to recover, review the cluster failover application event log using Event Viewer. [ERROR_CLUSTER_EVICT_WITHOUT_CLEANUP (0x1708)] |
| Error code 5897 | There is a conflict between two or more parameter values specified for the resource properties. [ERROR_CLUSTER_PARAMETER_MISMATCH (0x1709)] |
| Error code 5898 | This computer cannot be made a member of a cluster. [ERROR_NODE_CANNOT_BE_CLUSTERED (0x170A)] |
| Error code 5899 | This computer cannot be made a member of a cluster because it does not have the correct version of Windows installed. [ERROR_CLUSTER_WRONG_OS_VERSION (0x170B)] |
| Error code 5900 | A cluster with the specified cluster name cannot be created because this cluster name is already in use. Specify a different cluster name. [ERROR_CLUSTER_CANT_CREATE_DUP_CLUSTER_NAME (0x170C)] |
| Error code 5901 | The cluster configuration action has already been performed. [ERROR_CLUSCFG_ALREADY_COMMITTED (0x170D)] |
| Error code 5902 | The cluster creation action cannot be rolled back. [ERROR_CLUSCFG_ROLLBACK_FAILED (0x170E)] |
| Error code 5903 | The drive letter assigned to the system disk on one node conflicts with the drive letter assigned to a disk on another node. [ERROR_CLUSCFG_SYSTEM_DISK_DRIVE_LETTER_CONFLICT (0x170F)] |
| Error code 5904 | One or more nodes in the cluster are running a version of Windows that does not support this operation. [ERROR_CLUSTER_OLD_VERSION (0x1710)] |
| Error code 5905 | The corresponding computer account name does not match the network name for this resource. [ERROR_CLUSTER_MISMATCHED_COMPUTER_ACCT_NAME (0x1711)] |
| Error code 5906 | No network adapters are available. [ERROR_CLUSTER_NO_NET_ADAPTERS (0x1712)] |
| Error code 5907 | The cluster node has been poisoned. [ERROR_CLUSTER_POISONED (0x1713)] |
| Error code 5908 | The group is unable to accept the request because it is moving to another node. [ERROR_CLUSTER_GROUP_MOVING (0x1714)] |
| Error code 5909 | The resource type cannot accept the request because it is too busy performing another operation. [ERROR_CLUSTER_RESOURCE_TYPE_BUSY (0x1715)] |
| Error code 5910 | The cluster resource DLL call timed out. [ERROR_RESOURCE_CALL_TIMED_OUT (0x1716)] |
| Error code 5911 | The address is invalid for an IPv6 address resource. A global IPv6 address is required and must match the cluster network. Matching addresses are not allowed. [ERROR_INVALID_CLUSTER_IPV6_ADDRESS (0x1717)] |
| Error code 5912 | An internal cluster error occurred. An invalid function call was attempted. [ERROR_CLUSTER_INTERNAL_INVALID_FUNCTION (0x1718)] |
| Error code 5913 | The parameter value is out of the acceptable range. [ERROR_CLUSTER_PARAMETER_OUT_OF_BOUNDS (0x1719)] |
| Error code 5914 | A network error occurred while sending data to another node in the cluster. The number of bytes sent was less than requested. [ERROR_CLUSTER_PARTIAL_SEND (0x171A)] |
| Error code 5915 | An invalid block register operation was attempted. [ERROR_CLUSTER_REGISTRY_INVALID_FUNCTION (0x171B)] |
| Error code 5916 | The input string of characters was not terminated correctly. [ERROR_CLUSTER_INVALID_STRING_TERMINATION (0x171C)] |
| Error code 5917 | The input string of characters is not in a valid format for the data it represents. [ERROR_CLUSTER_INVALID_STRING_FORMAT (0x171D)] |
| Error code 5918 | An internal cluster error occurred. An attempt was made to perform a cluster database transaction while the transaction was already in progress. [ERROR_CLUSTER_DATABASE_TRANSACTION_IN_PROGRESS (0x171E)] |
| Error code 5919 | An internal cluster error occurred. An attempt was made to commit a cluster database transaction while no transaction was in progress. [ERROR_CLUSTER_DATABASE_TRANSACTION_NOT_IN_PROGRESS (0x171F)] |
| Error code 5920 | An internal cluster error occurred. The data was not initialized correctly. [ERROR_CLUSTER_NULL_DATA (0x1720)] |
| Error code 5921 | An error occurred while reading from the data stream. An unexpected number of bytes were returned. [ERROR_CLUSTER_PARTIAL_READ (0x1721)] |
| Error code 5922 | An error occurred while writing to a data stream. The requested number of bytes could not be written. [ERROR_CLUSTER_PARTIAL_WRITE (0x1722)] |
| Error code 5923 | An error occurred while deserializing the cluster data stream. [ERROR_CLUSTER_CANT_DESERIALIZE_DATA (0x1723)] |
| Error code 5924 | One or more property values for this resource conflict with one or more property values associated with its dependent resource(s). [ERROR_DEPENDENT_RESOURCE_PROPERTY_CONFLICT (0x1724)] |
| Error code 5925 | The cluster quorum was not present to form a cluster. [ERROR_CLUSTER_NO_QUORUM (0x1725)] |
| Error code 5926 | The cluster network is invalid for an IPv6 address resource or does not match the configured address. [ERROR_CLUSTER_INVALID_IPV6_NETWORK (0x1726)] |
| Error code 5927 | The cluster network is invalid for the IPv6 tunnel resource. Check the configuration of the IP address resource on which the IPv6 tunnel resource depends. [ERROR_CLUSTER_INVALID_IPV6_TUNNEL_NETWORK (0x1727)] |
| Error code 5928 | The quota resource cannot be in the "Available Storage" group. [ERROR_QUORUM_NOT_ALLOWED_IN_THIS_GROUP (0x1728)] |
| Error code 5929 | This resource's dependencies are too deeply nested. [ERROR_DEPENDENCY_TREE_TOO_COMPLEX (0x1729)] |
| Error code 5930 | A call to the resource DLL resulted in an unhandled exception. [ERROR_EXCEPTION_IN_RESOURCE_CALL (0x172A)] |
| Error code 5931 | The RHS process failed to initialize. [ERROR_CLUSTER_RHS_FAILED_INITIALIZATION (0x172B)] |
| Error code 5932 | Failover Clustering is not installed on this node. [ERROR_CLUSTER_NOT_INSTALLED (0x172C)] |
| Error code 5933 | Resources must be online on the same node for this operation. [ERROR_CLUSTER_RESOURCES_MUST_BE_ONLINE_ON_THE_SAME_NODE (0x172D)] |
| Error code 5934 | A new node cannot be added because this cluster has already reached the maximum number of nodes. [ERROR_CLUSTER_MAX_NODES_IN_CLUSTER (0x172E)] |
| Error code 5935 | This cluster cannot be created because the specified number of nodes exceeds the maximum allowed number. [ERROR_CLUSTER_TOO_MANY_NODES (0x172F)] |
| Error code 5936 | An attempt to use the specified cluster name failed because an enabled computer object with the specified name already exists in the domain. [ERROR_CLUSTER_OBJECT_ALREADY_USED (0x1730)] |
| Error code 5937 | This group cannot be destroyed. It contains non-core application groups that must be deleted before the cluster can be destroyed. [ERROR_NONCORE_GROUPS_FOUND (0x1731)] |
| Error code 5938 | The file share associated with the file share witness resource cannot be hosted by this group or any of its nodes. [ERROR_FILE_SHARE_RESOURCE_CONFLICT (0x1732)] |
| Error code 5939 | Evicting this node is currently invalid. Due to quorum requirements, evicting a node will shut down the cluster. If it is the last node in the cluster, the destroy cluster command must be used. [ERROR_CLUSTER_EVICT_INVALID_REQUEST (0x1733)] |
| Error code 5940 | Only one instance of this type of resource is allowed in the cluster. [ERROR_CLUSTER_SINGLETON_RESOURCE (0x1734)] |
| Error code 5941 | Only one instance of this resource type is allowed per resource group. [ERROR_CLUSTER_GROUP_SINGLETON_RESOURCE (0x1735)] |
| Error code 5942 | The resource failed to go online due to one or more provider resources failing. [ERROR_CLUSTER_RESOURCE_PROVIDER_FAILED (0x1736)] |
| Error code 5943 | The resource indicated that no node could connect to the internet. [ERROR_CLUSTER_RESOURCE_CONFIGURATION_ERROR (0x1737)] |
| Error code 6000 | The specified file could not be encrypted. [ERROR_ENCRYPTION_FAILED (0x1770)] |
| Error code 6001 | The specified file could not be decrypted. [ERROR_DECRYPTION_FAILED (0x1771)] |
| Error code 6002 | The specified file is encrypted and the user does not have the ability to decrypt it. [ERROR_FILE_ENCRYPTED (0x1772)] |
| Error code 6003 | There is no valid encryption recovery policy configured for this system. [ERROR_NO_RECOVERY_POLICY (0x1773)] |
| Error code 6004 | The encryption driver required for this system is not loaded. [ERROR_NO_EFS (0x1774)] |
| Error code 6005 | The file was encrypted with a different encryption driver than the one currently loaded. [ERROR_WRONG_EFS (0x1775)] |
| Error code 6006 | There are no EFS keys assigned to the user. [ERROR_NO_USER_KEYS (0x1776)] |
| Error code 6007 | The specified file is not encrypted. [ERROR_FILE_NOT_ENCRYPTED (0x1777)] |
| Error code 6008 | The specified file is not in the specified EFS export format. [ERROR_NOT_EXPORT_FORMAT (0x1778)] |
| Error code 6009 | The specified file is read-only. [ERROR_FILE_READ_ONLY (0x1779)] |
| Error code 6010 | The directory is disabled for encryption. [ERROR_DIR_EFS_DISALLOWED (0x177A)] |
| Error code 6011 | The server is not trusted for remote encryption. [ERROR_EFS_SERVER_NOT_TRUSTED (0x177B)] |
| Error code 6012 | The recovery policy configured for this system contains an invalid recovery certificate. [ERROR_BAD_RECOVERY_POLICY (0x177C)] |
| Error code 6013 | The encryption algorithm used in the source file requires a larger key buffer than the one in the destination file. [ERROR_EFS_ALG_BLOB_TOO_BIG (0x177D)] |
| Error code 6014 | The disk partition does not support file encryption. [ERROR_VOLUME_NOT_SUPPORT_EFS (0x177E)] |
| Error code 6015 | This device is disabled for file encryption. [ERROR_EFS_DISABLED (0x177F)] |
| Error code 6016 | A newer system is required to decrypt this encrypted file. [ERROR_EFS_VERSION_NOT_SUPPORT (0x1780)] |
| Error code 6017 | The remote server sent an invalid response for a file opened using client-side encryption. [ERROR_CS_ENCRYPTION_INVALID_SERVER_RESPONSE (0x1781)] |
| Error code 6018 | The remote server does not support client-side encryption even though it claims to do so. [ERROR_CS_ENCRYPTION_UNSUPPORTED_SERVER (0x1782)] |
| Error code 6019 | The file is encrypted and must be opened in client-side encryption mode. [ERROR_CS_ENCRYPTION_EXISTING_ENCRYPTED_FILE (0x1783)] |
| Error code 6020 | A new encrypted file is being created and $EFS must be made available. [ERROR_CS_ENCRYPTION_NEW_ENCRYPTED_FILE (0x1784)] |
| Error code 6021 | An SMB CSE client requested an FSCTL on a file that is not a CSE. [ERROR_CS_ENCRYPTION_FILE_NOT_CSE (0x1785)] |
| Error code 6118 | The server list for this workgroup is currently unavailable [ERROR_NO_BROWSER_SERVERS_FOUND (0x17E6)] |
| Error code 6200 | The Task Scheduler service must be configured to run in the system account to function properly. Individual tasks may be configured to run in other accounts. [SCHED_E_SERVICE_NOT_LOCALSYSTEM (0x1838)] |
| Error code 6600 | The log service encountered an invalid log sector. [ERROR_LOG_SECTOR_INVALID (0x19C8)] |
| Error code 6601 | The log service encountered a log sector with invalid block parity. [ERROR_LOG_SECTOR_PARITY_INVALID (0x19C9)] |
| Error code 6602 | The log service encountered a remapped log sector. [ERROR_LOG_SECTOR_REMAPPED (0x19CA)] |
| Error code 6603 | The log service encountered a partial or incomplete logging block. [ERROR_LOG_BLOCK_INCOMPLETE (0x19CB)] |
| Error code 6604 | The log service encountered an attempt to access data outside the active log range. [ERROR_LOG_INVALID_RANGE (0x19CC)] |
| Error code 6605 | The user organization buffers for the log service have been exhausted. [ERROR_LOG_BLOCKS_EXHAUSTED (0x19CD)] |
| Error code 6606 | The log service encountered a read attempt from a staging area with an invalid read context. [ERROR_LOG_READ_CONTEXT_INVALID (0x19CE)] |
| Error code 6607 | The log service encountered an invalid log replay area. [ERROR_LOG_RESTART_INVALID (0x19CF)] |
| Error code 6608 | The log service encountered an invalid log block version. [ERROR_LOG_BLOCK_VERSION (0x19D0)] |
| Error code 6609 | The log service encountered an invalid log block. [ERROR_LOG_BLOCK_INVALID (0x19D1)] |
| Error code 6610 | The log service encountered an attempt to read the log with an invalid read mode. [ERROR_LOG_READ_MODE_INVALID (0x19D2)] |
| Error code 6611 | The log service encountered a log flow with no restart area. [ERROR_LOG_NO_RESTART (0x19D3)] |
| Error code 6612 | The log service encountered a corrupted metadata file. [ERROR_LOG_METADATA_CORRUPT (0x19D4)] |
| Error code 6613 | The log service encountered a metadata file that could not be created by the log file system. [ERROR_LOG_METADATA_INVALID (0x19D5)] |
| Error code 6614 | The log service encountered a metadata file with inconsistent data. [ERROR_LOG_METADATA_INCONSISTENT (0x19D6)] |
| Error code 6615 | The log service encountered an incorrect attempt to allocate or discard reservation space. [ERROR_LOG_RESERVATION_INVALID (0x19D7)] |
| Error code 6616 | The log service cannot delete the log file or file system container. [ERROR_LOG_CANT_DELETE (0x19D8)] |
| Error code 6617 | The log service has reached the maximum number of containers allocated to the log file. [ERROR_LOG_CONTAINER_LIMIT_EXCEEDED (0x19D9)] |
| Error code 6618 | The log service attempted to read or write back past the start of the log. [ERROR_LOG_START_OF_LOG (0x19DA)] |
| Error code 6619 | The log policy could not be installed because a policy of the same type already exists. [ERROR_LOG_POLICY_ALREADY_INSTALLED (0x19DB)] |
| Error code 6620 | The relevant log policy was not installed at the time of the request. [ERROR_LOG_POLICY_NOT_INSTALLED (0x19DC)] |
| Error code 6621 | The policy set installed in the registry is invalid. [ERROR_LOG_POLICY_INVALID (0x19DD)] |
| Error code 6622 | A policy in the relevant log prevented the operation from completing. [ERROR_LOG_POLICY_CONFLICT (0x19DE)] |
| Error code 6623 | Log space cannot be reclaimed because the log is pinned by the archive tail. [ERROR_LOG_PINNED_ARCHIVE_TAIL (0x19DF)] |
| Error code 6624 | The log record is not a record in the log file. [ERROR_LOG_RECORD_NONEXISTENT (0x19E0)] |
| Error code 6625 | The number of reserved log records or the modification to the number of reserved log records is invalid. [ERROR_LOG_RECORDS_RESERVED_INVALID (0x19E1)] |
| Error code 6626 | The reserved log space or log space modification is invalid. [ERROR_LOG_SPACE_RESERVED_INVALID (0x19E2)] |
| Error code 6627 | The new or existing archive tail or active log rule is invalid. [ERROR_LOG_TAIL_INVALID (0x19E3)] |
| Error code 6628 | Log space is exhausted. [ERROR_LOG_FULL (0x19E4)] |
| Error code 6629 | The log could not be set to the requested size. [ERROR_COULD_NOT_RESIZE_LOG (0x19E5)] |
| Error code 6630 | The log is multicast and direct writes to the physical log are not allowed. [ERROR_LOG_MULTIPLEXED (0x19E6)] |
| Error code 6631 | The operation failed because the log is a dedicated log. [ERROR_LOG_DEDICATED (0x19E7)] |
| Error code 6632 | The operation requires an archive context. [ERROR_LOG_ARCHIVE_NOT_IN_PROGRESS (0x19E8)] |
| Error code 6633 | Log archiving in progress. [ERROR_LOG_ARCHIVE_IN_PROGRESS (0x19E9)] |
| Error code 6634 | The operation requires a non-ephemeral log, but the log is ephemeral. [ERROR_LOG_EPHEMERAL (0x19EA)] |
| Error code 6635 | A log must have at least two containers before it can be read or written to. [ERROR_LOG_NOT_ENOUGH_CONTAINERS (0x19EB)] |
| Error code 6636 | The log client has already registered to the stream. [ERROR_LOG_CLIENT_ALREADY_REGISTERED (0x19EC)] |
| Error code 6637 | The log client was not registered to the stream. [ERROR_LOG_CLIENT_NOT_REGISTERED (0x19ED)] |
| Error code 6638 | A request has already been made to process the full log status. [ERROR_LOG_FULL_HANDLER_IN_PROGRESS (0x19EE)] |
| Error code 6639 | The log service encountered an error while trying to read from a log container. [ERROR_LOG_CONTAINER_READ_FAILED (0x19EF)] |
| Error code 6640 | The log service encountered an error while trying to write to a log container. [ERROR_LOG_CONTAINER_WRITE_FAILED (0x19F0)] |
| Error code 6641 | The log service encountered an error while trying to open a log container. [ERROR_LOG_CONTAINER_OPEN_FAILED (0x19F1)] |
| Error code 6642 | The log service encountered an invalid container state when attempting a requested action. [ERROR_LOG_CONTAINER_STATE_INVALID (0x19F2)] |
| Error code 6643 | The log service is not in the correct state to perform the requested action. [ERROR_LOG_STATE_INVALID (0x19F3)] |
| Error code 6644 | Log space cannot be reclaimed because the log is pinned. [ERROR_LOG_PINNED (0x19F4)] |
| Error code 6645 | Failed to flush log metadata. [ERROR_LOG_METADATA_FLUSH_FAILED (0x19F5)] |
| Error code 6646 | Security in the log and its containers is inconsistent. [ERROR_LOG_INCONSISTENT_SECURITY (0x19F6)] |
| Error code 6647 | Records were appended to the log or changes were made to the reservation but the log could not be cleared. [ERROR_LOG_APPENDED_FLUSH_FAILED (0x19F7)] |
| Error code 6648 | The log was pinned because a reservation was consuming most of the log space. Free some of the reserved logs to make room. [ERROR_LOG_PINNED_RESERVATION (0x19F8)] |
| Error code 6700 | The transaction handle associated with this operation is invalid. [ERROR_INVALID_TRANSACTION (0x1A2C)] |
| Error code 6701 | The requested operation was performed in the context of a transaction that is no longer active. [ERROR_TRANSACTION_NOT_ACTIVE (0x1A2D)] |
| Error code 6702 | The requested operation is invalid on the transaction object in its current state. [ERROR_TRANSACTION_REQUEST_NOT_VALID (0x1A2E)] |
| Error code 6703 | The caller called a response API, but the response was unexpected because the translation memory did not issue the corresponding request to the caller. [ERROR_TRANSACTION_NOT_REQUESTED (0x1A2F)] |
| Error code 6704 | It is too late to perform the requested operation as the transaction has already been aborted. [ERROR_TRANSACTION_ALREADY_ABORTED (0x1A30)] |
| Error code 6705 | It is too late to perform the requested operation because the transaction has already been committed. [ERROR_TRANSACTION_ALREADY_COMMITTED (0x1A31)] |
| Error code 6706 | The transaction manager was unable to initialize successfully. Transaction operations are not supported. [ERROR_TM_INITIALIZATION_FAILED (0x1A32)] |
| Error code 6707 | The specified ResourceManager has not made any changes or updates to the resource within this transaction. [ERROR_RESOURCEMANAGER_READ_ONLY (0x1A33)] |
| Error code 6708 | The resource manager attempted to prepare a transaction that was not successfully joined. [ERROR_TRANSACTION_NOT_JOINED (0x1A34)] |
| Error code 6709 | The transaction object already contains a superlist, and the caller attempted to perform an operation that would create a new superlist. Only one superlist is allowed. [ERROR_TRANSACTION_SUPERIOR_EXISTS (0x1A35)] |
| Error code 6710 | RM attempted to register a protocol that already exists. [ERROR_CRM_PROTOCOL_ALREADY_EXISTS (0x1A36)] |
| Error code 6711 | An attempt to propagate the transaction failed. [ERROR_TRANSACTION_PROPAGATION_FAILED (0x1A37)] |
| Error code 6712 | The requested propagation protocol is not registered as a CRM. [ERROR_CRM_PROTOCOL_NOT_FOUND (0x1A38)] |
| Error code 6713 | The buffer passed to PushTransaction or PullTransaction is in an invalid format. [ERROR_TRANSACTION_INVALID_MARSHALL_BUFFER (0x1A39)] |
| Error code 6714 | The current transaction context associated with the thread is not a valid handle to the transaction object. [ERROR_CURRENT_TRANSACTION_NOT_VALID (0x1A3A)] |
| Error code 6715 | The specified transaction object could not be opened because it was not found. [ERROR_TRANSACTION_NOT_FOUND (0x1A3B)] |
| Error code 6716 | The specified ResourceManager object could not be opened because it was not found. [ERROR_RESOURCEMANAGER_NOT_FOUND (0x1A3C)] |
| Error code 6717 | The specified registry object could not be opened because it was not found. [ERROR_ENLISTMENT_NOT_FOUND (0x1A3D)] |
| Error code 6718 | The specified TransactionManager object could not be opened because it was not found. The TransactionManager must be brought fully online by calling RecoverTransactionManager to recover to the end of its log file before objects in the Transaction or ResourceManager namespaces can be opened. In addition, errors writing records to its log file can cause the TransactionManager to go offline. [ERROR_TRANSACTIONMANAGER_NOT_FOUND (0x1A3E)] |
| Error code 6719 | The specified object could not be created or opened because the associated TransactionManager is not online. [ERROR_TRANSACTIONMANAGER_NOT_ONLINE (0x1A3F)] |
| Error code 6720 | The specified TransactionManager could not create the objects in its log file in the Ob namespace. Therefore, the TransactionManager could not recover. [ERROR_TRANSACTIONMANAGER_RECOVERY_NAME_COLLISION (0x1A40)] |
| Error code 6721 | The Create Top Record call could not be completed on this transaction object because the transaction object specified for insertion is a sub-child of the transaction. Only the root of the transaction can be inserted as the master. [ERROR_TRANSACTION_NOT_ROOT (0x1A41)] |
| Error code 6722 | Because the associated transaction manager or resource manager was closed, the identifier is no longer valid. [ERROR_TRANSACTION_OBJECT_EXPIRED (0x1A42)] |
| Error code 6723 | The specified operation cannot be performed on this privileged recruit because the recruit was not created with the corresponding completion response in NotificationMask. [ERROR_TRANSACTION_RESPONSE_NOT_ENLISTED (0x1A43)] |
| Error code 6724 | The specified operation could not be performed because the record to be recorded was too long. This can be caused by two conditions: |
| Error code 6725 | Implicit transactions are not supported. [ERROR_IMPLICIT_TRANSACTION_NOT_SUPPORTED (0x1A45)] |
| Error code 6726 | The kernel transaction manager had to abort or forget the transaction because it stopped forward progress. [ERROR_TRANSACTION_INTEGRITY_VIOLATED (0x1A46)] |
| Error code 6727 | The provided TransactionManager identity does not match the identity recorded in the TransactionManager log file. [ERROR_TRANSACTIONMANAGER_IDENTITY_MISMATCH (0x1A47)] |
| Error code 6728 | This snapshot operation cannot continue because the transaction resource manager cannot be frozen in its current state. Try again. [ERROR_RM_CANNOT_BE_FROZEN_FOR_SNAPSHOT (0x1A48)] |
| Error code 6729 | The transaction with the specified EnlistmentMask cannot be enlisted because the transaction has already completed the PrePrepare phase. To ensure correctness, the ResourceManager must switch to write mode and stop caching data within this transaction. Enlisting may only succeed for subsequent transaction phases. [ERROR_TRANSACTION_MUST_WRITETHROUGH (0x1A49)] |
| Error code 6730 | The transaction has no superior mandate. [ERROR_TRANSACTION_NO_SUPERIOR (0x1A4A)] |
| Error code 6800 | The function attempted to use a name reserved for use by another transaction. [ERROR_TRANSACTIONAL_CONFLICT (0x1A90)] |
| Error code 6801 | Transaction support within the specified file system resource manager was not started or was stopped due to an error. [ERROR_RM_NOT_ACTIVE (0x1A91)] |
| Error code 6802 | RM metadata has been corrupted. RM will not work. [ERROR_RM_METADATA_CORRUPT (0x1A92)] |
| Error code 6803 | The specified directory does not contain a resource manager. [ERROR_DIRECTORY_NOT_RM (0x1A93)] |
| Error code 6805 | The remote server or share does not support transactional file operations. [ERROR_TRANSACTIONS_UNSUPPORTED_REMOTE (0x1A95)] |
| Error code 6806 | The requested log size is invalid. [ERROR_LOG_RESIZE_INVALID_SIZE (0x1A96)] |
| Error code 6807 | The object (file stream link) corresponding to the handle was deleted by a rollback operation. [ERROR_OBJECT_NO_LONGER_EXISTS (0x1A97)] |
| Error code 6808 | The file specified for the open file for this transactional file was not found. [ERROR_STREAM_MINIVERSION_NOT_FOUND (0x1A98)] |
| Error code 6809 | The specified file conversion was found but invalidated. The most likely cause is a rollback of a saved transaction. [ERROR_STREAM_MINIVERSION_NOT_VALID (0x1A99)] |
| Error code 6810 | A minitransaction may only be opened within the context of the transaction in which it was created. [ERROR_MINIVERSION_INACCESSIBLE_FROM_SPECIFIED_TRANSACTION (0x1A9A)] |
| Error code 6811 | Cannot open a small file with edit access. [ERROR_CANT_OPEN_MINIVERSION_WITH_MODIFY_INTENT (0x1A9B)] |
| Error code 6812 | No more minigames can be created for this stream. [ERROR_CANT_CREATE_MORE_STREAM_MINIVERSIONS (0x1A9C)] |
| Error code 6814 | The remote server sent a mismatched version number or FID for a file opened with transactions. [ERROR_REMOTE_FILE_VERSION_MISMATCH (0x1A9E)] |
| Error code 6815 | The identifier was invalidated by a transaction. The most likely cause is a memory mapping on a file or handle that was open when the transaction terminated or rolled back to a savepoint. [ERROR_HANDLE_NO_LONGER_VALID (0x1A9F)] |
| Error code 6816 | There is no transaction metadata in the file. [ERROR_NO_TXF_METADATA (0x1AA0)] |
| Error code 6817 | Log data is corrupted. [ERROR_LOG_CORRUPTION_DETECTED (0x1AA1)] |
| Error code 6818 | The file cannot be recovered because there is still an open handle on it. [ERROR_CANT_RECOVER_WITH_HANDLE_OPEN (0x1AA2)] |
| Error code 6819 | The result of the transaction is unavailable because the resource manager responsible for it has disconnected. [ERROR_RM_DISCONNECTED (0x1AA3)] |
| Error code 6820 | The request was rejected because the enlistment in question is not a superior enlistment. [ERROR_ENLISTMENT_NOT_SUPERIOR (0x1AA4)] |
| Error code 6821 | The transaction resource manager is already consistent. No recovery is needed. [ERROR_RECOVERY_NOT_NEEDED (0x1AA5)] |
| Error code 6822 | The transaction resource manager has already been started. [ERROR_RM_ALREADY_STARTED (0x1AA6)] |
| Error code 6823 | The file cannot be opened for transactions because its identity depends on the outcome of an unresolved transaction. [ERROR_FILE_IDENTITY_NOT_PERSISTENT (0x1AA7)] |
| Error code 6824 | The operation cannot be performed because another transaction depends on this property not being changed. [ERROR_CANT_BREAK_TRANSACTIONAL_DEPENDENCY (0x1AA8)] |
| Error code 6825 | The operation may involve a single file with transactional resource managers and is therefore not allowed. [ERROR_CANT_CROSS_RM_BOUNDARY (0x1AA9)] |
| Error code 6826 | The $Txf directory must be empty for this operation to succeed. [ERROR_TXF_DIR_NOT_EMPTY (0x1AAA)] |
| Error code 6827 | The operation will leave the transaction resource manager in an inconsistent state and is therefore not allowed. [ERROR_INDOUBT_TRANSACTIONS_EXIST (0x1AAB)] |
| Error code 6828 | The operation could not be completed because the transaction manager has no record. [ERROR_TM_VOLATILE (0x1AAC)] |
| Error code 6829 | A rollback cannot be scheduled because a previously scheduled rollback has been executed or is queued for execution. [ERROR_ROLLBACK_TIMER_EXPIRED (0x1AAD)] |
| Error code 6830 | The transaction metadata attribute in the file or directory is corrupted and unreadable. [ERROR_TXF_ATTRIBUTE_CORRUPT (0x1AAE)] |
| Error code 6831 | The encryption process could not be completed because a transaction is active. [ERROR_EFS_NOT_ALLOWED_IN_TRANSACTION (0x1AAF)] |
| Error code 6832 | This object is not allowed to be opened in a transaction. [ERROR_TRANSACTIONAL_OPEN_NOT_ALLOWED (0x1AB0)] |
| Error code 6833 | An attempt to create space in the transaction resource manager log failed. The failure status is logged in the event log. [ERROR_LOG_GROWTH_FAILED (0x1AB1)] |
| Error code 6834 | Memory mapping (creating a mapped partition) of a remote file within a transaction is not supported. [ERROR_TRANSACTED_MAPPING_UNSUPPORTED_REMOTE (0x1AB2)] |
| Error code 6835 | Transaction metadata already exists in this file and cannot be replaced. [ERROR_TXF_METADATA_ALREADY_PRESENT (0x1AB3)] |
| Error code 6836 | A transaction scope could not be entered because the scope handler was not initialized. [ERROR_TRANSACTION_SCOPE_CALLBACKS_NOT_SET (0x1AB4)] |
| Error code 6837 | A promotion was required to allow the resource manager to recruit, but the transaction was set to disallow. [ERROR_TRANSACTION_REQUIRED_PROMOTION (0x1AB5)] |
| Error code 6838 | This file is open for modification in an unresolved transaction and can only be opened for execution by the transaction-bound reader. [ERROR_CANNOT_EXECUTE_FILE_IN_TRANSACTION (0x1AB6)] |
| Error code 6839 | The request to thaw frozen transactions was ignored because the transactions were not frozen before. [ERROR_TRANSACTIONS_NOT_FROZEN (0x1AB7)] |
| Error code 6840 | Transactions cannot be frozen because the freeze is already in progress. [ERROR_TRANSACTION_FREEZE_IN_PROGRESS (0x1AB8)] |
| Error code 6841 | The target volume is not a snapshot volume. This operation is only valid on a volume mounted as a snapshot. [ERROR_NOT_SNAPSHOT_VOLUME (0x1AB9)] |
| Error code 6842 | The save point operation failed because the files are open in the transaction. This is not allowed. [ERROR_NO_SAVEPOINT_WITH_OPEN_FILES (0x1ABA)] |
| Error code 6843 | Windows detected corruption in a file and has since repaired that file. Data loss may have occurred. [ERROR_DATA_LOST_REPAIR (0x1ABB)] |
| Error code 6844 | The sparser operation could not be completed because there is an active transaction in the file. [ERROR_SPARSE_NOT_ALLOWED_IN_TRANSACTION (0x1ABC)] |
| Error code 6845 | The call to create a TransactionManager object failed because the Tm identity stored in the log file does not match the Tm identity passed as an argument. [ERROR_TM_IDENTITY_MISMATCH (0x1ABD)] |
| Error code 6846 | An I/O attempt was made on a section element that was floated as a result of a transaction termination. No valid data was found. [ERROR_FLOATED_SECTION (0x1ABE)] |
| Error code 6847 | The transaction resource manager cannot currently accept transactional work due to a transient condition such as low resources. [ERROR_CANNOT_ACCEPT_TRANSACTED_WORK (0x1ABF)] |
| Error code 6848 | The transaction resource manager had too many pending transactions that could not be aborted. The transaction resource manager was closed. [ERROR_CANNOT_ABORT_TRANSACTIONS (0x1AC0)] |
| Error code 6849 | The operation could not be completed because there are bad clusters on the disk. [ERROR_BAD_CLUSTERS (0x1AC1)] |
| Error code 6850 | The compression operation could not be completed because there is an active transaction on the file. [ERROR_COMPRESSION_NOT_ALLOWED_IN_TRANSACTION (0x1AC2)] |
| Error code 6851 | The operation could not be completed because the volume is dirty. Please run chkdsk and try again. [ERROR_VOLUME_DIRTY (0x1AC3)] |
| Error code 6852 | Link tracing cannot be completed because the transaction is active. [ERROR_NO_LINK_TRACKING_IN_TRANSACTION (0x1AC4)] |
| Error code 6853 | This operation cannot be performed in a transaction. [ERROR_OPERATION_NOT_SUPPORTED_IN_TRANSACTION (0x1AC5)] |
| Error code 7001 | The specified session name is invalid. [ERROR_CTX_WINSTATION_NAME_INVALID (0x1B59)] |
| Error code 7002 | The specified protocol driver is invalid. [ERROR_CTX_INVALID_PD (0x1B5A)] |
| Error code 7003 | The specified protocol driver was not found in the system path. [ERROR_CTX_PD_NOT_FOUND (0x1B5B)] |
| Error code 7004 | The specified peripheral driver was not found in the system path. [ERROR_CTX_WD_NOT_FOUND (0x1B5C)] |
| Error code 7005 | Unable to create a registry key to log events for this session. [ERROR_CTX_CANNOT_MAKE_EVENTLOG_ENTRY (0x1B5D)] |
| Error code 7006 | A service with the same name already exists on the system. [ERROR_CTX_SERVICE_NAME_COLLISION (0x1B5E)] |
| Error code 7007 | Close operation pending in session. [ERROR_CTX_CLOSE_PENDING (0x1B5F)] |
| Error code 7008 | There are no free output buffers available. [ERROR_CTX_NO_OUTBUF (0x1B60)] |
| Error code 7009 | MODEM.INF file not found. [ERROR_CTX_MODEM_INF_NOT_FOUND (0x1B61)] |
| Error code 7010 | The modem name was not found in MODEM.INF. [ERROR_CTX_INVALID_MODEMNAME (0x1B62)] |
| Error code 7011 | The modem did not accept the command sent to it. Verify that the configured modem name matches the connected modem. [ERROR_CTX_MODEM_RESPONSE_ERROR (0x1B63)] |
| Error code 7012 | The modem did not respond to the command sent to it. Check that the modem is connected and powered on properly. [ERROR_CTX_MODEM_RESPONSE_TIMEOUT (0x1B64)] |
| Error code 7013 | Carrier detection failed or the carrier was dropped due to a disconnect. [ERROR_CTX_MODEM_RESPONSE_NO_CARRIER (0x1B65)] |
| Error code 7014 | No dial tone was detected within the required time. Check that the phone cable is connected properly and working. [ERROR_CTX_MODEM_RESPONSE_NO_DIALTONE (0x1B66)] |
| Error code 7015 | A busy signal was detected at a remote site during callback. [ERROR_CTX_MODEM_RESPONSE_BUSY (0x1B67)] |
| Error code 7016 | Voice was detected at a remote location during callback. [ERROR_CTX_MODEM_RESPONSE_VOICE (0x1B68)] |
| Error code 7017 | Transport driver error [ERROR_CTX_TD_ERROR (0x1B69)] |
| Error code 7022 | The specified session could not be found. [ERROR_CTX_WINSTATION_NOT_FOUND (0x1B6E)] |
| Error code 7023 | The specified session name is already in use. [ERROR_CTX_WINSTATION_ALREADY_EXISTS (0x1B6F)] |
| Error code 7024 | The requested operation cannot be completed because the terminal connection is currently busy processing a disconnect reset or delete operation. [ERROR_CTX_WINSTATION_BUSY (0x1B70)] |
| Error code 7025 | An attempt was made to connect to a session whose video mode is not supported by the current client. [ERROR_CTX_BAD_VIDEO_MODE (0x1B71)] |
| Error code 7035 | The application tried to enable DOS graphics mode. DOS graphics mode is not supported. [ERROR_CTX_GRAPHICS_INVALID (0x1B7B)] |
| Error code 7037 | Your interactive logon privilege has been disabled. Please contact your administrator. [ERROR_CTX_LOGON_DISABLED (0x1B7D)] |
| Error code 7038 | The requested operation can only be performed on the system console. This is often caused by a driver or system DLL that requires direct access to the console. [ERROR_CTX_NOT_CONSOLE (0x1B7E)] |
| Error code 7040 | The client failed to respond to the server connection message. [ERROR_CTX_CLIENT_QUERY_TIMEOUT (0x1B80)] |
| Error code 7041 | Disconnecting the console session is not supported. [ERROR_CTX_CONSOLE_DISCONNECT (0x1B81)] |
| Error code 7042 | Reconnecting to a disconnected console session is not supported. [ERROR_CTX_CONSOLE_CONNECT (0x1B82)] |
| Error code 7044 | A request to control another remote session was denied. [ERROR_CTX_SHADOW_DENIED (0x1B84)] |
| Error code 7045 | Access to the requested session was denied. [ERROR_CTX_WINSTATION_ACCESS_DENIED (0x1B85)] |
| Error code 7049 | The specified peripheral driver is invalid. [ERROR_CTX_INVALID_WD (0x1B89)] |
| Error code 7050 | The requested session could not be controlled remotely. This may be because the session was disconnected or because there is no currently logged in user. [ERROR_CTX_SHADOW_INVALID (0x1B8A)] |
| Error code 7051 | The required session is not configured to allow remote control. [ERROR_CTX_SHADOW_DISABLED (0x1B8B)] |
| Error code 7052 | Your request to connect to this Terminal Server was denied. The Terminal Server client license number is currently in use by another user. Please contact your system administrator to obtain a unique license number. [ERROR_CTX_CLIENT_LICENSE_IN_USE (0x1B8C)] |
| Error code 7053 | Your request to connect to this Terminal Server was denied. A Terminal Server client license number was not entered for this version of the Terminal Server client. Please contact your system administrator. [ERROR_CTX_CLIENT_LICENSE_NOT_SET (0x1B8D)] |
| Error code 7054 | The number of connections to this computer is limited and all connections are in use. Try connecting later or contact your system administrator. [ERROR_CTX_LICENSE_NOT_AVAILABLE (0x1B8E)] |
| Error code 7055 | The client you are using is not authorized to use this system. Your login request was rejected. [ERROR_CTX_LICENSE_CLIENT_INVALID (0x1B8F)] |
| Error code 7056 | The system license has expired. The login request was rejected. [ERROR_CTX_LICENSE_EXPIRED (0x1B90)] |
| Error code 7057 | Remote control could not be terminated because the specified session is not currently being remotely controlled. [ERROR_CTX_SHADOW_NOT_RUNNING (0x1B91)] |
| Error code 7058 | The console's remote control was terminated due to a display mode change. Changing the display mode in a remote control session is not supported. [ERROR_CTX_SHADOW_ENDED_BY_MODE_CHANGE (0x1B92)] |
| Error code 7059 | Activation has already been reset to the maximum number of times for this installation. Your activation timer will not be cleared. [ERROR_ACTIVATION_COUNT_EXCEEDED (0x1B93)] |
| Error code 7060 | Remote logins are currently disabled. [ERROR_CTX_WINSTATIONS_DISABLED (0x1B94)] |
| Error code 7061 | You do not have the appropriate encryption level to access this session. [ERROR_CTX_ENCRYPTION_LEVEL_REQUIRED (0x1B95)] |
| Error code 7062 | User %s/s is currently logged on to this computer. Only the current user or administrator can log on to this computer. [ERROR_CTX_SESSION_IN_USE (0x1B96)] |
| Error code 7063 | User %s/s is already logged in to this computer's console. You do not have permission to log in at this time. To resolve this issue, contact %s/s and ask them to log out. [ERROR_CTX_NO_FORCE_LOGOFF (0x1B97)] |
| Error code 7064 | Unable to sign you in due to account restrictions. [ERROR_CTX_ACCOUNT_RESTRICTION (0x1B98)] |
| Error code 7065 | The RDP protocol component %2 detected an error in the protocol stream and terminated the client connection. [ERROR_RDP_PROTOCOL_ERROR (0x1B99)] |
| Error code 7066 | The client drive mapping service has connected on the terminal connection. [ERROR_CTX_CDM_CONNECT (0x1B9A)] |
| Error code 7067 | The client drive mapping service was disconnected on terminal connection. [ERROR_CTX_CDM_DISCONNECT (0x1B9B)] |
| Error code 7068 | The Terminal Server security layer detected an error in the protocol stream and terminated the client connection. [ERROR_CTX_SECURITY_LAYER_ERROR (0x1B9C)] |
| Error code 7069 | The target session is incompatible with the current session. [ERROR_TS_INCOMPATIBLE_SESSIONS (0x1B9D)] |
| Error code 8001 | The File Replication Service API was called incorrectly. [FRS_ERR_INVALID_API_SEQUENCE (0x1F41)] |
| Error code 8002 | The file replication service could not be started. [FRS_ERR_STARTING_SERVICE (0x1F42)] |
| Error code 8003 | The file replication service could not be stopped. [FRS_ERR_STOPPING_SERVICE (0x1F43)] |
| Error code 8004 | The File Replication Service API terminated the request. The event log may provide more information. [FRS_ERR_INTERNAL_API (0x1F44)] |
| Error code 8005 | The File Replication Service terminated the request. The event log may provide more information. [FRS_ERR_INTERNAL (0x1F45)] |
| Error code 8006 | The file copy service could not be contacted. The event log may provide more information. [FRS_ERR_SERVICE_COMM (0x1F46)] |
| Error code 8007 | The File Replication Service cannot fulfill the request because the user does not have sufficient privileges. The event log may provide more information. [FRS_ERR_INSUFFICIENT_PRIV (0x1F47)] |
| Error code 8008 | The File Replication Service cannot fulfill the request because authenticated RPC is not available. The event log may provide more information. [FRS_ERR_AUTHENTICATION (0x1F48)] |
| Error code 8009 | The File Replication Service cannot fulfill the request because the user does not have sufficient privileges on the domain controller. The event log may provide more information. [FRS_ERR_PARENT_INSUFFICIENT_PRIV (0x1F49)] |
| Error code 8010 | The File Replication Service cannot fulfill the request because authenticated RPC is not available on the domain controller. The event log may provide more information. [FRS_ERR_PARENT_AUTHENTICATION (0x1F4A)] |
| Error code 8011 | The File Replication Service cannot contact the File Replication Service on the domain controller. The event log may provide more information. [FRS_ERR_CHILD_TO_PARENT_COMM (0x1F4B)] |
| Error code 8012 | The File Replication service on the domain controller cannot contact the File Replication service on this computer. The event log may provide more information. [FRS_ERR_PARENT_TO_CHILD_COMM (0x1F4C)] |
| Error code 8013 | The File Replication Service could not populate the system volume due to an internal error. The event log may provide more information. [FRS_ERR_SYSVOL_POPULATE (0x1F4D)] |
| Error code 8014 | The File Replication Service could not populate the system volume due to an internal timeout. The event log may provide more information. [FRS_ERR_SYSVOL_POPULATE_TIMEOUT (0x1F4E)] |
| Error code 8015 | The File Replication Service cannot process the request. The system volume is occupied by a previous request. [FRS_ERR_SYSVOL_IS_BUSY (0x1F4F)] |
| Error code 8016 | The File Replication Service could not stop replication of the system volume due to an internal error. The event log may provide more information. [FRS_ERR_SYSVOL_DEMOTE (0x1F50)] |
| Error code 8017 | The File Replication Service detected an invalid parameter. [FRS_ERR_INVALID_SERVICE_PARAMETER (0x1F51)] |
| Error code 8200 | An error occurred while installing the directory service. For more information, see the event log. [ERROR_DS_NOT_INSTALLED (0x2008)] |
| Error code 8201 | The directory service evaluated group membership locally. [ERROR_DS_MEMBERSHIP_EVALUATED_LOCALLY (0x2009)] |
| Error code 8202 | The specified directory service attribute or value does not exist. [ERROR_DS_NO_ATTRIBUTE_OR_VALUE (0x200A)] |
| Error code 8203 | The specified directory service attribute syntax is invalid. [ERROR_DS_INVALID_ATTRIBUTE_SYNTAX (0x200B)] |
| Error code 8204 | The specified attribute type is not defined for the directory service. [ERROR_DS_ATTRIBUTE_TYPE_UNDEFINED (0x200C)] |
| Error code 8205 | The specified directory service attribute or value already exists. [ERROR_DS_ATTRIBUTE_OR_VALUE_EXISTS (0x200D)] |
| Error code 8206 | Directory service is busy. [ERROR_DS_BUSY (0x200E)] |
| Error code 8207 | Directory service is unavailable. [ERROR_DS_UNAVAILABLE (0x200F)] |
| Error code 8208 | The directory service could not allocate a relative identifier. [ERROR_DS_NO_RIDS_ALLOCATED (0x2010)] |
| Error code 8209 | The directory service has exhausted the relative identifier pool. [ERROR_DS_NO_MORE_RIDS (0x2011)] |
| Error code 8210 | The requested operation could not be performed because the directory service is not the primary service for this type of operation. [ERROR_DS_INCORRECT_ROLE_OWNER (0x2012)] |
| Error code 8211 | Directory Service could not initialize the subsystem that allocates relative identifiers. [ERROR_DS_RIDMGR_INIT_ERROR (0x2013)] |
| Error code 8212 | The requested operation did not satisfy one or more constraints associated with the object class. [ERROR_DS_OBJ_CLASS_VIOLATION (0x2014)] |
| Error code 8213 | The directory service can only perform the requested operation on a leaf object. [ERROR_DS_CANT_ON_NON_LEAF (0x2015)] |
| Error code 8214 | The directory service cannot perform the requested operation on the object's RDN attribute. [ERROR_DS_CANT_ON_RDN (0x2016)] |
| Error code 8215 | The directory service detected an attempt to modify the object class of an object. [ERROR_DS_CANT_MOD_OBJ_CLASS (0x2017)] |
| Error code 8216 | The requested cross-domain move could not be performed. [ERROR_DS_CROSS_DOM_MOVE_ERROR (0x2018)] |
| Error code 8217 | The global catalog server could not be contacted. [ERROR_DS_GC_NOT_AVAILABLE (0x2019)] |
| Error code 8218 | The policy object is shared and can only be modified from the root. [ERROR_SHARED_POLICY (0x201A)] |
| Error code 8219 | The policy object does not exist. [ERROR_POLICY_OBJECT_NOT_FOUND (0x201B)] |
| Error code 8220 | The requested policy information is only in the directory service. [ERROR_POLICY_ONLY_IN_DS (0x201C)] |
| Error code 8221 | Domain controller promotion is currently active. [ERROR_PROMOTION_ACTIVE (0x201D)] |
| Error code 8222 | Domain controller promotion is not currently active [ERROR_NO_PROMOTION_ACTIVE (0x201E)] |
| Error code 8224 | An operations error occurred. [ERROR_DS_OPERATIONS_ERROR (0x2020)] |
| Error code 8225 | A protocol error occurred. [ERROR_DS_PROTOCOL_ERROR (0x2021)] |
| Error code 8226 | The time limit for this request has been exceeded. [ERROR_DS_TIMELIMIT_EXCEEDED (0x2022)] |
| Error code 8227 | The size limit for this request has been exceeded. [ERROR_DS_SIZELIMIT_EXCEEDED (0x2023)] |
| Error code 8228 | The administrative limit for this request has been exceeded. [ERROR_DS_ADMIN_LIMIT_EXCEEDED (0x2024)] |
| Error code 8229 | The comparison response was incorrect. [ERROR_DS_COMPARE_FALSE (0x2025)] |
| Error code 8230 | The comparison response was correct. [ERROR_DS_COMPARE_TRUE (0x2026)] |
| Error code 8231 | The server does not support the requested authentication method. [ERROR_DS_AUTH_METHOD_NOT_SUPPORTED (0x2027)] |
| Error code 8232 | A more secure authentication method is required for this server. [ERROR_DS_STRONG_AUTH_REQUIRED (0x2028)] |
| Error code 8233 | Inappropriate authentication. [ERROR_DS_INAPPROPRIATE_AUTH (0x2029)] |
| Error code 8234 | Unknown authentication mechanism. [ERROR_DS_AUTH_UNKNOWN (0x202A)] |
| Error code 8235 | A referral was returned from the server. [ERROR_DS_REFERRAL (0x202B)] |
| Error code 8236 | The server does not support the requested critical extension. [ERROR_DS_UNAVAILABLE_CRIT_EXTENSION (0x202C)] |
| Error code 8237 | This request requires a secure connection. [ERROR_DS_CONFIDENTIALITY_REQUIRED (0x202D)] |
| Error code 8238 | Inappropriate match. [ERROR_DS_INAPPROPRIATE_MATCHING (0x202E)] |
| Error code 8239 | A constraint violation occurred. [ERROR_DS_CONSTRAINT_VIOLATION (0x202F)] |
| Error code 8240 | There is no such object on the server. [ERROR_DS_NO_SUCH_OBJECT (0x2030)] |
| Error code 8241 | There is a problem with the alias. [ERROR_DS_ALIAS_PROBLEM (0x2031)] |
| Error code 8242 | An invalid dn syntax was specified. [ERROR_DS_INVALID_DN_SYNTAX (0x2032)] |
| Error code 8243 | The object is a leaf object. [ERROR_DS_IS_LEAF (0x2033)] |
| Error code 8244 | There is a problem with the alias not being referenced. [ERROR_DS_ALIAS_DEREF_PROBLEM (0x2034)] |
| Error code 8245 | The server is unwilling to process the request. [ERROR_DS_UNWILLING_TO_PERFORM (0x2035)] |
| Error code 8246 | A loop has been detected. [ERROR_DS_LOOP_DETECT (0x2036)] |
| Error code 8247 | There is a naming violation. [ERROR_DS_NAMING_VIOLATION (0x2037)] |
| Error code 8248 | The result set is too large. [ERROR_DS_OBJECT_RESULTS_TOO_LARGE (0x2038)] |
| Error code 8249 | The operation affects multiple DSAs [ERROR_DS_AFFECTS_MULTIPLE_DSAS (0x2039)] |
| Error code 8250 | The server is not working. [ERROR_DS_SERVER_DOWN (0x203A)] |
| Error code 8251 | A local error occurred. [ERROR_DS_LOCAL_ERROR (0x203B)] |
| Error code 8252 | An encoding error occurred. [ERROR_DS_ENCODING_ERROR (0x203C)] |
| Error code 8253 | A decoding error occurred. [ERROR_DS_DECODING_ERROR (0x203D)] |
| Error code 8254 | The search filter cannot be recognized. [ERROR_DS_FILTER_UNKNOWN (0x203E)] |
| Error code 8255 | One or more parameters are invalid. [ERROR_DS_PARAM_ERROR (0x203F)] |
| Error code 8256 | The specified method is not supported. [ERROR_DS_NOT_SUPPORTED (0x2040)] |
| Error code 8257 | No results were returned. [ERROR_DS_NO_RESULTS_RETURNED (0x2041)] |
| Error code 8258 | The server does not support the specified control. [ERROR_DS_CONTROL_NOT_FOUND (0x2042)] |
| Error code 8259 | A referral loop was detected by the client. [ERROR_DS_CLIENT_LOOP (0x2043)] |
| Error code 8260 | The preset referral limit has been exceeded. [ERROR_DS_REFERRAL_LIMIT_EXCEEDED (0x2044)] |
| Error code 8261 | Search requires a SORT control. [ERROR_DS_SORT_CONTROL_MISSING (0x2045)] |
| Error code 8262 | Search results exceed the specified offset range. [ERROR_DS_OFFSET_RANGE_ERROR (0x2046)] |
| Error code 8301 | The root object must be the head of the naming context. The root object cannot have an instantiated parent. [ERROR_DS_ROOT_MUST_BE_NC (0x206D)] |
| Error code 8302 | The add replica operation could not be performed. The naming context must be writable in order to create the replica. [ERROR_DS_ADD_REPLICA_INHIBITED (0x206E)] |
| Error code 8303 | An attribute reference occurred that was not defined in the schema. [ERROR_DS_ATT_NOT_DEF_IN_SCHEMA (0x206F)] |
| Error code 8304 | The maximum object size has been exceeded. [ERROR_DS_MAX_OBJ_SIZE_EXCEEDED (0x2070)] |
| Error code 8305 | An attempt was made to add an object to the directory with a name that is already in use. [ERROR_DS_OBJ_STRING_NAME_EXISTS (0x2071)] |
| Error code 8306 | An attempt was made to add an object of a class that does not have an RDN defined in the schema. [ERROR_DS_NO_RDN_DEFINED_IN_SCHEMA (0x2072)] |
| Error code 8307 | An attempt was made to add an object with an RDN that is not defined in the schema. [ERROR_DS_RDN_DOESNT_MATCH_SCHEMA (0x2073)] |
| Error code 8308 | None of the required attributes were found on the objects. [ERROR_DS_NO_REQUESTED_ATTS_FOUND (0x2074)] |
| Error code 8309 | The user buffer is too small. [ERROR_DS_USER_BUFFER_TO_SMALL (0x2075)] |
| Error code 8310 | The attribute specified in the operation does not exist on the object. [ERROR_DS_ATT_IS_NOT_ON_OBJ (0x2076)] |
| Error code 8311 | Illegal modification operation. Some aspects of the modification are not allowed. [ERROR_DS_ILLEGAL_MOD_OPERATION (0x2077)] |
| Error code 8312 | The specified object is too large. [ERROR_DS_OBJ_TOO_LARGE (0x2078)] |
| Error code 8313 | The specified instance type is invalid. [ERROR_DS_BAD_INSTANCE_TYPE (0x2079)] |
| Error code 8314 | The operation must be performed on the primary DSA. [ERROR_DS_MASTERDSA_REQUIRED (0x207A)] |
| Error code 8315 | The object class attribute must be specified. [ERROR_DS_OBJECT_CLASS_REQUIRED (0x207B)] |
| Error code 8316 | The required attribute is missing. [ERROR_DS_MISSING_REQUIRED_ATT (0x207C)] |
| Error code 8317 | An attempt was made to modify an object to include an attribute that is illegal for its class. [ERROR_DS_ATT_NOT_DEF_FOR_CLASS (0x207D)] |
| Error code 8318 | The specified attribute already exists on the object. [ERROR_DS_ATT_ALREADY_EXISTS (0x207E)] |
| Error code 8320 | The specified attribute does not exist or has no values. [ERROR_DS_CANT_ADD_ATT_VALUES (0x2080)] |
| Error code 8321 | Multiple values were specified for an attribute that can only have one value. [ERROR_DS_SINGLE_VALUE_CONSTRAINT (0x2081)] |
| Error code 8322 | The attribute value was not in the acceptable range. [ERROR_DS_RANGE_CONSTRAINT (0x2082)] |
| Error code 8323 | The specified value already exists. [ERROR_DS_ATT_VAL_ALREADY_EXISTS (0x2083)] |
| Error code 8324 | The attribute cannot be removed because it does not exist in the object. [ERROR_DS_CANT_REM_MISSING_ATT (0x2084)] |
| Error code 8325 | The attribute value cannot be removed because it does not exist in the object. [ERROR_DS_CANT_REM_MISSING_ATT_VAL (0x2085)] |
| Error code 8326 | The specified root object cannot be a subreference. [ERROR_DS_ROOT_CANT_BE_SUBREF (0x2086)] |
| Error code 8327 | Sequence not allowed. [ERROR_DS_NO_CHAINING (0x2087)] |
| Error code 8328 | Evaluation with chains is not allowed. [ERROR_DS_NO_CHAINED_EVAL (0x2088)] |
| Error code 8329 | The operation cannot be performed because the object's parent is either unmounted or deleted. [ERROR_DS_NO_PARENT_OBJECT (0x2089)] |
| Error code 8330 | A parent is not allowed to be an alias. Aliases are leaf objects. [ERROR_DS_PARENT_IS_AN_ALIAS (0x208A)] |
| Error code 8331 | The object and its parent must be of the same type, either both primitives or both replicas. [ERROR_DS_CANT_MIX_MASTER_AND_REPS (0x208B)] |
| Error code 8332 | The operation cannot be performed because of the presence of child objects. This operation can only be performed on a leaf object. [ERROR_DS_CHILDREN_EXIST (0x208C)] |
| Error code 8333 | The directory object was not found. [ERROR_DS_OBJ_NOT_FOUND (0x208D)] |
| Error code 8334 | The object with the alias is missing. [ERROR_DS_ALIASED_OBJ_MISSING (0x208E)] |
| Error code 8335 | The object name has invalid syntax. [ERROR_DS_BAD_NAME_SYNTAX (0x208F)] |
| Error code 8336 | An alias may not refer to another alias. [ERROR_DS_ALIAS_POINTS_TO_ALIAS (0x2090)] |
| Error code 8337 | The alias reference cannot be undone. [ERROR_DS_CANT_DEREF_ALIAS (0x2091)] |
| Error code 8338 | The operation is out of scope. [ERROR_DS_OUT_OF_SCOPE (0x2092)] |
| Error code 8339 | The operation cannot continue because the object is being removed. [ERROR_DS_OBJECT_BEING_REMOVED (0x2093)] |
| Error code 8340 | The DSA object could not be deleted. [ERROR_DS_CANT_DELETE_DSA_OBJ (0x2094)] |
| Error code 8341 | A directory service error occurred. [ERROR_DS_GENERIC_ERROR (0x2095)] |
| Error code 8342 | The operation can only be performed on an internal DSA primary object. [ERROR_DS_DSA_MUST_BE_INT_MASTER (0x2096)] |
| Error code 8343 | The object must be of class DSA. [ERROR_DS_CLASS_NOT_DSA (0x2097)] |
| Error code 8344 | Insufficient access rights to perform the operation. [ERROR_DS_INSUFF_ACCESS_RIGHTS (0x2098)] |
| Error code 8345 | The object cannot be added because the parent is not on the list of possible superiors. [ERROR_DS_ILLEGAL_SUPERIOR (0x2099)] |
| Error code 8346 | Access to the attribute is not allowed because the attribute is owned by the Security Account Manager (SAM). [ERROR_DS_ATTRIBUTE_OWNED_BY_SAM (0x209A)] |
| Error code 8347 | The name contains too many parts. [ERROR_DS_NAME_TOO_MANY_PARTS (0x209B)] |
| Error code 8348 | Name too long. [ERROR_DS_NAME_TOO_LONG (0x209C)] |
| Error code 8349 | The name value is too long. [ERROR_DS_NAME_VALUE_TOO_LONG (0x209D)] |
| Error code 8350 | The directory service encountered a name resolution error. [ERROR_DS_NAME_UNPARSEABLE (0x209E)] |
| Error code 8351 | The directory service cannot obtain the attribute type for the name. [ERROR_DS_NAME_TYPE_UNKNOWN (0x209F)] |
| Error code 8352 | The name does not identify an object; the name identifies a ghost. [ERROR_DS_NOT_AN_OBJECT (0x20A0)] |
| Error code 8353 | The security descriptor is too short. [ERROR_DS_SEC_DESC_TOO_SHORT (0x20A1)] |
| Error code 8354 | Invalid security descriptor. [ERROR_DS_SEC_DESC_INVALID (0x20A2)] |
| Error code 8355 | Failed to create a name for the deleted object. [ERROR_DS_NO_DELETED_NAME (0x20A3)] |
| Error code 8356 | The new subreference parent must exist. [ERROR_DS_SUBREF_MUST_HAVE_PARENT (0x20A4)] |
| Error code 8357 | The object must be a naming context. [ERROR_DS_NCNAME_MUST_BE_NC (0x20A5)] |
| Error code 8358 | An attribute owned by the system cannot be added. [ERROR_DS_CANT_ADD_SYSTEM_ONLY (0x20A6)] |
| Error code 8359 | The object class must be structural; you cannot instantiate an abstract class. [ERROR_DS_CLASS_MUST_BE_CONCRETE (0x20A7)] |
| Error code 8360 | The schema object could not be found. [ERROR_DS_INVALID_DMD (0x20A8)] |
| Error code 8361 | A local object with this GUID (dead or alive) already exists. [ERROR_DS_OBJ_GUID_EXISTS (0x20A9)] |
| Error code 8362 | The operation cannot be performed on a backlink. [ERROR_DS_NOT_ON_BACKLINK (0x20AA)] |
| Error code 8363 | The cross-reference for the specified naming context could not be found. [ERROR_DS_NO_CROSSREF_FOR_NC (0x20AB)] |
| Error code 8364 | The operation could not be performed because the directory service is shut down. [ERROR_DS_SHUTTING_DOWN (0x20AC)] |
| Error code 8365 | The directory service request is invalid. [ERROR_DS_UNKNOWN_OPERATION (0x20AD)] |
| Error code 8366 | The role owner attribute could not be read. [ERROR_DS_INVALID_ROLE_OWNER (0x20AE)] |
| Error code 8367 | The requested FSMO operation failed. The current FSMO owner could not be contacted. [ERROR_DS_COULDNT_CONTACT_FSMO (0x20AF)] |
| Error code 8368 | Modifying the distinguished name via a naming context is not allowed. [ERROR_DS_CROSS_NC_DN_RENAME (0x20B0)] |
| Error code 8369 | The attribute cannot be modified because it is owned by the system. [ERROR_DS_CANT_MOD_SYSTEM_ONLY (0x20B1)] |
| Error code 8370 | Only replicators can perform this function. [ERROR_DS_REPLICATOR_ONLY (0x20B2)] |
| Error code 8371 | The specified class is not defined. [ERROR_DS_OBJ_CLASS_NOT_DEFINED (0x20B3)] |
| Error code 8372 | The specified class is not a subclass. [ERROR_DS_OBJ_CLASS_NOT_SUBCLASS (0x20B4)] |
| Error code 8373 | The name reference is invalid. [ERROR_DS_NAME_REFERENCE_INVALID (0x20B5)] |
| Error code 8374 | Cross-reference already exists. [ERROR_DS_CROSS_REF_EXISTS (0x20B6)] |
| Error code 8375 | A primary cross-reference cannot be deleted. [ERROR_DS_CANT_DEL_MASTER_CROSSREF (0x20B7)] |
| Error code 8376 | Subtree notifications are only supported on NC headers. [ERROR_DS_SUBTREE_NOTIFY_NOT_NC_HEAD (0x20B8)] |
| Error code 8377 | The media filter is too complex. [ERROR_DS_NOTIFY_FILTER_TOO_COMPLEX (0x20B9)] |
| Error code 8378 | Schema update failed |
| Error code 8379 | Schema update failed |
| Error code 8380 | Schema update failed |
| Error code 8381 | Schema update failed |
| Error code 8382 | Schema update failed |
| Error code 8383 | Schema update failed |
| Error code 8384 | Schema update failed |
| Error code 8385 | Failed to delete the chart |
| Error code 8386 | Failed to delete the chart |
| Error code 8387 | Schema update failed |
| Error code 8388 | Schema update failed |
| Error code 8389 | Schema update failed |
| Error code 8390 | Schema update failed |
| Error code 8391 | Schema update failed |
| Error code 8392 | Schema update failed |
| Error code 8393 | Failed to delete the chart |
| Error code 8394 | Failed to delete the chart |
| Error code 8395 | Failed to delete the chart |
| Error code 8396 | Schema update failed to recalculate the validation cache. [ERROR_DS_RECALCSCHEMA_FAILED (0x20CC)] |
| Error code 8397 | The tree deletion did not complete. The request must be submitted again to continue the tree deletion. [ERROR_DS_TREE_DELETE_NOT_FINISHED (0x20CD)] |
| Error code 8398 | The requested delete operation could not be performed. [ERROR_DS_CANT_DELETE (0x20CE)] |
| Error code 8399 | The control class ID for the schema register could not be read. [ERROR_DS_ATT_SCHEMA_REQ_ID (0x20CF)] |
| Error code 8400 | The attribute scheme has invalid syntax. [ERROR_DS_BAD_ATT_SCHEMA_SYNTAX (0x20D0)] |
| Error code 8401 | The attribute cannot be cached. [ERROR_DS_CANT_CACHE_ATT (0x20D1)] |
| Error code 8402 | The class could not be cached. [ERROR_DS_CANT_CACHE_CLASS (0x20D2)] |
| Error code 8403 | The attribute cannot be removed from the cache. [ERROR_DS_CANT_REMOVE_ATT_CACHE (0x20D3)] |
| Error code 8404 | The class could not be removed from the cache. [ERROR_DS_CANT_REMOVE_CLASS_CACHE (0x20D4)] |
| Error code 8405 | The distinguished name attribute could not be read. [ERROR_DS_CANT_RETRIEVE_DN (0x20D5)] |
| Error code 8406 | A directory service master reference is not configured. Therefore, the directory service is unable to issue references to objects outside this group. [ERROR_DS_MISSING_SUPREF (0x20D6)] |
| Error code 8407 | The instance type attribute could not be retrieved. [ERROR_DS_CANT_RETRIEVE_INSTANCE (0x20D7)] |
| Error code 8408 | An internal error occurred. [ERROR_DS_CODE_INCONSISTENCY (0x20D8)] |
| Error code 8409 | A database error occurred. [ERROR_DS_DATABASE_ERROR (0x20D9)] |
| Error code 8410 | The GOVERNSID attribute is missing. [ERROR_DS_GOVERNSID_MISSING (0x20DA)] |
| Error code 8411 | The expected attribute is missing. [ERROR_DS_MISSING_EXPECTED_ATT (0x20DB)] |
| Error code 8412 | The specified naming context is missing a cross-reference. [ERROR_DS_NCNAME_MISSING_CR_REF (0x20DC)] |
| Error code 8413 | A security check error occurred. [ERROR_DS_SECURITY_CHECKING_ERROR (0x20DD)] |
| Error code 8414 | The schema was not loaded. [ERROR_DS_SCHEMA_NOT_LOADED (0x20DE)] |
| Error code 8415 | Schema allocation failed. Please check if the device memory is low. [ERROR_DS_SCHEMA_ALLOC_FAILED (0x20DF)] |
| Error code 8416 | Failed to get the required syntax for the attribute schema. [ERROR_DS_ATT_SCHEMA_REQ_SYNTAX (0x20E0)] |
| Error code 8417 | Global catalog verification failed. The global catalog is unavailable or does not support the operation. Part of the directory is currently unavailable. [ERROR_DS_GCVERIFY_ERROR (0x20E1)] |
| Error code 8418 | The replication operation failed due to a schema mismatch between the servers involved. [ERROR_DS_DRA_SCHEMA_MISMATCH (0x20E2)] |
| Error code 8419 | The DSA object could not be found. [ERROR_DS_CANT_FIND_DSA_OBJ (0x20E3)] |
| Error code 8420 | The naming context could not be found. [ERROR_DS_CANT_FIND_EXPECTED_NC (0x20E4)] |
| Error code 8421 | The naming context could not be found in the cache. [ERROR_DS_CANT_FIND_NC_IN_CACHE (0x20E5)] |
| Error code 8422 | The child object could not be retrieved. [ERROR_DS_CANT_RETRIEVE_CHILD (0x20E6)] |
| Error code 8423 | Modification is not allowed for security reasons. [ERROR_DS_SECURITY_ILLEGAL_MODIFY (0x20E7)] |
| Error code 8424 | The process cannot replace the hidden record. [ERROR_DS_CANT_REPLACE_HIDDEN_REC (0x20E8)] |
| Error code 8425 | The hierarchy file is invalid. [ERROR_DS_BAD_HIERARCHY_FILE (0x20E9)] |
| Error code 8426 | An attempt to create a hierarchical table failed. [ERROR_DS_BUILD_HIERARCHY_TABLE_FAILED (0x20EA)] |
| Error code 8427 | The directory configuration parameter is missing from the registry. [ERROR_DS_CONFIG_PARAM_MISSING (0x20EB)] |
| Error code 8428 | An attempt to count address book indexes failed. [ERROR_DS_COUNTING_AB_INDICES_FAILED (0x20EC)] |
| Error code 8429 | Hierarchy table allocation failed. [ERROR_DS_HIERARCHY_TABLE_MALLOC_FAILED (0x20ED)] |
| Error code 8430 | The directory service encountered an internal failure. [ERROR_DS_INTERNAL_FAILURE (0x20EE)] |
| Error code 8431 | The directory service encountered an unknown failure. [ERROR_DS_UNKNOWN_ERROR (0x20EF)] |
| Error code 8432 | The root object requires a "top" class. [ERROR_DS_ROOT_REQUIRES_CLASS_TOP (0x20F0)] |
| Error code 8433 | This directory server is shutting down and cannot take ownership of new floating primary single-role roles. [ERROR_DS_REFUSING_FSMO_ROLES (0x20F1)] |
| Error code 8434 | The directory service is missing mandatory configuration information and cannot determine ownership of the floating single primary operating roles. [ERROR_DS_MISSING_FSMO_SETTINGS (0x20F2)] |
| Error code 8435 | The directory service was unable to transfer ownership of one or more of the single-floating primary process roles to other servers. [ERROR_DS_UNABLE_TO_SURRENDER_ROLES (0x20F3)] |
| Error code 8436 | The replication operation failed. [ERROR_DS_DRA_GENERIC (0x20F4)] |
| Error code 8437 | An invalid parameter was specified for this replication operation. [ERROR_DS_DRA_INVALID_PARAMETER (0x20F5)] |
| Error code 8438 | The directory service is too busy to complete the replication operation at this time. [ERROR_DS_DRA_BUSY (0x20F6)] |
| Error code 8439 | The distinguished name specified for this replication operation is invalid. [ERROR_DS_DRA_BAD_DN (0x20F7)] |
| Error code 8440 | The naming context specified for this replication operation is invalid. [ERROR_DS_DRA_BAD_NC (0x20F8)] |
| Error code 8441 | The specified distinguished name for this replication operation already exists. [ERROR_DS_DRA_DN_EXISTS (0x20F9)] |
| Error code 8442 | The copy system encountered an internal error. [ERROR_DS_DRA_INTERNAL_ERROR (0x20FA)] |
| Error code 8443 | The replication process encountered a database inconsistency. [ERROR_DS_DRA_INCONSISTENT_DIT (0x20FB)] |
| Error code 8444 | The server specified for this replication operation could not be contacted. [ERROR_DS_DRA_CONNECTION_FAILED (0x20FC)] |
| Error code 8445 | The replication process encountered an object with an invalid instance type. [ERROR_DS_DRA_BAD_INSTANCE_TYPE (0x20FD)] |
| Error code 8446 | The replication operation failed to allocate memory. [ERROR_DS_DRA_OUT_OF_MEM (0x20FE)] |
| Error code 8447 | The replication process encountered a mail system error. [ERROR_DS_DRA_MAIL_PROBLEM (0x20FF)] |
| Error code 8448 | The replication reference information for the target server already exists. [ERROR_DS_DRA_REF_ALREADY_EXISTS (0x2100)] |
| Error code 8449 | The replication reference information for the target server does not exist. [ERROR_DS_DRA_REF_NOT_FOUND (0x2101)] |
| Error code 8450 | The naming context cannot be removed because it has been copied to another server. [ERROR_DS_DRA_OBJ_IS_REP_SOURCE (0x2102)] |
| Error code 8451 | The replication process encountered a database error. [ERROR_DS_DRA_DB_ERROR (0x2103)] |
| Error code 8452 | The naming context is being removed or not replicated from the specified server. [ERROR_DS_DRA_NO_REPLICA (0x2104)] |
| Error code 8453 | Replication access denied. [ERROR_DS_DRA_ACCESS_DENIED (0x2105)] |
| Error code 8454 | The requested operation is not supported by this version of the directory service. [ERROR_DS_DRA_NOT_SUPPORTED (0x2106)] |
| Error code 8455 | The remote replication procedure call was canceled. [ERROR_DS_DRA_RPC_CANCELLED (0x2107)] |
| Error code 8456 | The source server is currently rejecting replication requests. [ERROR_DS_DRA_SOURCE_DISABLED (0x2108)] |
| Error code 8457 | The destination server is currently rejecting replication requests. [ERROR_DS_DRA_SINK_DISABLED (0x2109)] |
| Error code 8458 | The replication operation failed due to an object name collision. [ERROR_DS_DRA_NAME_COLLISION (0x210A)] |
| Error code 8459 | The replication source has been reinstalled. [ERROR_DS_DRA_SOURCE_REINSTALLED (0x210B)] |
| Error code 8460 | The replication operation failed because the requested parent object is missing. [ERROR_DS_DRA_MISSING_PARENT (0x210C)] |
| Error code 8461 | The replication process was preempted. [ERROR_DS_DRA_PREEMPTED (0x210D)] |
| Error code 8462 | The replication synchronization attempt was abandoned due to lack of updates. [ERROR_DS_DRA_ABANDON_SYNC (0x210E)] |
| Error code 8463 | The replication process was terminated due to a system shutdown. [ERROR_DS_DRA_SHUTDOWN (0x210F)] |
| Error code 8464 | The synchronization attempt failed because the destination DC is currently waiting for new partial attributes to be synchronized from the source. This condition is normal if a recently planned change has modified the partial attribute set. The destination partial attribute set is not a subset of the source partial attribute set. [ERROR_DS_DRA_INCOMPATIBLE_PARTIAL_SET (0x2110)] |
| Error code 8465 | An attempt to synchronize a replica failed because the primary replica attempted to synchronize from a partial replica. [ERROR_DS_DRA_SOURCE_IS_PARTIAL_REPLICA (0x2111)] |
| Error code 8466 | The server specified for this replication operation was contacted, but that server was unable to contact an additional server required to complete the operation. [ERROR_DS_DRA_EXTN_CONNECTION_FAILED (0x2112)] |
| Error code 8467 | The directory service schema version for the source group is incompatible with the directory service version on this computer. [ERROR_DS_INSTALL_SCHEMA_MISMATCH (0x2113)] |
| Error code 8468 | Schema update failed |
| Error code 8469 | Name translation |
| Error code 8470 | Name translation |
| Error code 8471 | Name translation |
| Error code 8472 | Name translation |
| Error code 8473 | Name translation |
| Error code 8474 | Name translation |
| Error code 8475 | Modification of a created attribute is not allowed. [ERROR_DS_CONSTRUCTED_ATT_MOD (0x211B)] |
| Error code 8476 | The specified OM object class is invalid for an attribute with the specified syntax. [ERROR_DS_WRONG_OM_OBJ_CLASS (0x211C)] |
| Error code 8477 | Copy request forwarded; awaiting response. [ERROR_DS_DRA_REPL_PENDING (0x211D)] |
| Error code 8478 | The requested operation requires a directory service and none was available. [ERROR_DS_DS_REQUIRED (0x211E)] |
| Error code 8479 | The LDAP display name for the class or attribute contains non-ASCII characters. [ERROR_DS_INVALID_LDAP_DISPLAY_NAME (0x211F)] |
| Error code 8480 | The requested search is only supported for basic searches. [ERROR_DS_NON_BASE_SEARCH (0x2120)] |
| Error code 8481 | The search failed to retrieve attributes from the database. [ERROR_DS_CANT_RETRIEVE_ATTS (0x2121)] |
| Error code 8482 | A schema update operation attempted to add a backlink attribute that does not have a matching redirect link. [ERROR_DS_BACKLINK_WITHOUT_LINK (0x2122)] |
| Error code 8483 | The source and destination of the cross-domain transport do not agree on the epoch number of the object. Neither the source nor the destination contains the latest version of the object. [ERROR_DS_EPOCH_MISMATCH (0x2123)] |
| Error code 8484 | The source and destination of the cross-domain transport do not agree on the current name of the object. Neither the source nor the destination contains the latest version of the object. [ERROR_DS_SRC_NAME_MISMATCH (0x2124)] |
| Error code 8485 | The source and destination of the cross-domain transfer are the same. The caller should use the local transfer instead of the cross-domain transfer. [ERROR_DS_SRC_AND_DST_NC_IDENTICAL (0x2125)] |
| Error code 8486 | The source and destination for the cross-domain transfer do not agree on naming contexts in the forest. Neither the source nor the destination contains the latest version of the partition container. [ERROR_DS_DST_NC_MISMATCH (0x2126)] |
| Error code 8487 | The cross-domain transport destination is not authorized for the destination naming context. [ERROR_DS_NOT_AUTHORITIVE_FOR_DST_NC (0x2127)] |
| Error code 8488 | The source and destination of a cross-domain transport do not agree on the identity of the source object. Neither the source nor the destination contains the latest version of the source object. [ERROR_DS_SRC_GUID_MISMATCH (0x2128)] |
| Error code 8489 | The object being moved across domains is already known to have been deleted by the destination server. The source server does not have the latest version of the source object. [ERROR_DS_CANT_MOVE_DELETED_OBJECT (0x2129)] |
| Error code 8490 | Another operation requiring exclusive access to the PDC FSMO is already in progress. [ERROR_DS_PDC_OPERATION_IN_PROGRESS (0x212A)] |
| Error code 8491 | A cross-domain move failed, so there are two versions of the moved object—one in each of the source and destination domains. The destination object must be removed to restore the system to a consistent state. [ERROR_DS_CROSS_DOMAIN_CLEANUP_REQD (0x212B)] |
| Error code 8492 | This object may not be moved across domain boundaries either because cross-domain moves for this class are not allowed or the object has some special properties, e.g. |
| Error code 8493 | Objects with memberships cannot be moved across domain boundaries, as moving them once would violate the membership conditions for the account group. Remove the object from any account group membership and try again. [ERROR_DS_CANT_WITH_ACCT_GROUP_MEMBERSHPS (0x212D)] |
| Error code 8494 | The naming context header must be a direct child of another naming context header and not an internal node. [ERROR_DS_NC_MUST_HAVE_NC_PARENT (0x212E)] |
| Error code 8495 | The directory cannot validate the proposed naming context name because it does not have a replica of the naming context above the proposed naming context. Please ensure that the domain naming primary role is occupied by a server configured as a global catalog server and that the server is up to date with its replication partners. (Applies only to Windows 2000 domain naming primaries) [ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE (0x212F)] |
| Error code 8496 | The destination domain must be in native mode. [ERROR_DS_DST_DOMAIN_NOT_NATIVE (0x2130)] |
| Error code 8497 | The operation cannot be performed because the server does not have an infrastructure container in the domain of interest. [ERROR_DS_MISSING_INFRASTRUCTURE_CONTAINER (0x2131)] |
| Error code 8498 | Cross-domain moves are not allowed for non-empty account groups. [ERROR_DS_CANT_MOVE_ACCOUNT_GROUP (0x2132)] |
| Error code 8499 | Cross-domain moves are not allowed for non-empty resource groups. [ERROR_DS_CANT_MOVE_RESOURCE_GROUP (0x2133)] |
| Error code 8500 | The attribute search flag is invalid. The ANR bit is only valid on Unicode or Teletex string attributes. [ERROR_DS_INVALID_SEARCH_FLAG (0x2134)] |
| Error code 8501 | Tree deletes starting from an object with header NC as a child are not allowed. [ERROR_DS_NO_TREE_DELETE_ABOVE_NC (0x2135)] |
| Error code 8502 | The directory service failed to lock a tree in preparation for deleting the tree because the tree was in use. [ERROR_DS_COULDNT_LOCK_TREE_FOR_DELETE (0x2136)] |
| Error code 8503 | The directory service failed to determine the list of objects to delete while attempting to delete a tree. [ERROR_DS_COULDNT_IDENTIFY_OBJECTS_FOR_TREE_DELETE (0x2137)] |
| Error code 8504 | Security Account Management initialization failed with the following error: |
| Error code 8505 | Only an administrator can modify the membership list for an administrative group. [ERROR_DS_SENSITIVE_GROUP_VIOLATION (0x2139)] |
| Error code 8506 | The primary group ID for the domain controller account cannot be changed. [ERROR_DS_CANT_MOD_PRIMARYGROUPID (0x213A)] |
| Error code 8507 | An attempt was made to modify the database schema. [ERROR_DS_ILLEGAL_BASE_SCHEMA_MOD (0x213B)] |
| Error code 8508 | Adding a new mandatory attribute to an existing class, deleting a mandatory attribute from an existing class, or adding an optional attribute to a higher special class that is not a backlink attribute (either directly or through inheritance, for example, by adding or deleting a helper class) is not allowed. [ERROR_DS_NONSAFE_SCHEMA_CHANGE (0x213C)] |
| Error code 8509 | Schema updates are not allowed on this DC because the DC is not the FSMO role owner for the schema. [ERROR_DS_SCHEMA_UPDATE_DISALLOWED (0x213D)] |
| Error code 8510 | An object of this class cannot be created within a schema container. You can only create attribute schema and class schema objects within a schema container. [ERROR_DS_CANT_CREATE_UNDER_SCHEMA (0x213E)] |
| Error code 8511 | The replica/slave install failed to obtain the objectVersion attribute on the schema container on the source DC. Either the attribute is missing from the schema container or the supplied credentials do not have permission to read it. [ERROR_DS_INSTALL_NO_SRC_SCH_VERSION (0x213F)] |
| Error code 8512 | The replica/slave installation failed to read the objectVersion attribute in the SCHEMA section of the schema.ini file in the system32 directory. [ERROR_DS_INSTALL_NO_SCH_VERSION_IN_INIFILE (0x2140)] |
| Error code 8513 | The specified group type is invalid. [ERROR_DS_INVALID_GROUP_TYPE (0x2141)] |
| Error code 8514 | You cannot merge global groups in a mixed domain if the group is locked out. [ERROR_DS_NO_NEST_GLOBALGROUP_IN_MIXEDDOMAIN (0x2142)] |
| Error code 8515 | You cannot nest local groups in a mixed domain if security is enabled for the group. [ERROR_DS_NO_NEST_LOCALGROUP_IN_MIXEDDOMAIN (0x2143)] |
| Error code 8516 | A global group cannot have a local group as a member. [ERROR_DS_GLOBAL_CANT_HAVE_LOCAL_MEMBER (0x2144)] |
| Error code 8517 | A global group cannot have a universal group as a member. [ERROR_DS_GLOBAL_CANT_HAVE_UNIVERSAL_MEMBER (0x2145)] |
| Error code 8518 | A universal group cannot have a local group as a member. [ERROR_DS_UNIVERSAL_CANT_HAVE_LOCAL_MEMBER (0x2146)] |
| Error code 8519 | A global group cannot have a cross-domain member. [ERROR_DS_GLOBAL_CANT_HAVE_CROSSDOMAIN_MEMBER (0x2147)] |
| Error code 8520 | A local group cannot have another cross-domain local group as a member. [ERROR_DS_LOCAL_CANT_HAVE_CROSSDOMAIN_LOCAL_MEMBER (0x2148)] |
| Error code 8521 | The group containing primary members cannot be changed to a security-disabled group. [ERROR_DS_HAVE_PRIMARY_MEMBERS (0x2149)] |
| Error code 8522 | Failed to load the schema cache in the default SD conversion of string on a schema class object. [ERROR_DS_STRING_SD_CONVERSION_FAILED (0x214A)] |
| Error code 8523 | Only DSAs configured to be global catalog servers should be allowed to have the Domain Naming Master (FSMO) role. (Applies only to Windows 2000 servers) [ERROR_DS_NAMING_MASTER_GC (0x214B)] |
| Error code 8524 | The DSA process was unable to continue due to a DNS lookup failure. [ERROR_DS_DNS_LOOKUP_FAILURE (0x214C)] |
| Error code 8525 | While processing a change to an object's DNS hostname, the service's primary name values could not be kept synchronized. [ERROR_DS_COULDNT_UPDATE_SPNS (0x214D)] |
| Error code 8526 | The security descriptor attribute could not be read. [ERROR_DS_CANT_RETRIEVE_SD (0x214E)] |
| Error code 8527 | The requested object was not found, but an object with this key was found. [ERROR_DS_KEY_NOT_UNIQUE (0x214F)] |
| Error code 8528 | The syntax of the linked attribute being added is incorrect. Forward links can only have the syntax 2.5.5.1, 2.5.5.7, and 2.5.5.14, and backlinks can only have the syntax 2.5.5.1. [ERROR_DS_WRONG_LINKED_ATT_SYNTAX (0x2150)] |
| Error code 8529 | The Security Account Manager needs to obtain the boot password. [ERROR_DS_SAM_NEED_BOOTKEY_PASSWORD (0x2151)] |
| Error code 8530 | The Security Account Manager needs to obtain the boot key from the floppy disk. [ERROR_DS_SAM_NEED_BOOTKEY_FLOPPY (0x2152)] |
| Error code 8531 | The directory service could not be started. [ERROR_DS_CANT_START (0x2153)] |
| Error code 8532 | Directory services could not be started. [ERROR_DS_INIT_FAILURE (0x2154)] |
| Error code 8533 | Connection between the client and server requires packet privacy or better. [ERROR_DS_NO_PKT_PRIVACY_ON_CONNECTION (0x2155)] |
| Error code 8534 | The source domain may not be in the same forest as the destination. [ERROR_DS_SOURCE_DOMAIN_IN_FOREST (0x2156)] |
| Error code 8535 | The destination domain must be in the forest. [ERROR_DS_DESTINATION_DOMAIN_NOT_IN_FOREST (0x2157)] |
| Error code 8536 | The operation requires destination domain auditing to be enabled. [ERROR_DS_DESTINATION_AUDITING_NOT_ENABLED (0x2158)] |
| Error code 8537 | The process could not locate a DC for the source domain. [ERROR_DS_CANT_FIND_DC_FOR_SRC_DOMAIN (0x2159)] |
| Error code 8538 | The source object must be a group or user. [ERROR_DS_SRC_OBJ_NOT_GROUP_OR_USER (0x215A)] |
| Error code 8539 | The SID for the source object already exists in the destination forest. [ERROR_DS_SRC_SID_EXISTS_IN_FOREST (0x215B)] |
| Error code 8540 | The source and destination object must be of the same type. [ERROR_DS_SRC_AND_DST_OBJECT_CLASS_MISMATCH (0x215C)] |
| Error code 8541 | Security Account Management initialization failed with the following error: |
| Error code 8542 | Schema information could not be included in the replication request. [ERROR_DS_DRA_SCHEMA_INFO_SHIP (0x215E)] |
| Error code 8543 | The replication operation could not be completed due to a schema incompatibility. [ERROR_DS_DRA_SCHEMA_CONFLICT (0x215F)] |
| Error code 8544 | The replication operation could not be completed due to a previous schema incompatibility. [ERROR_DS_DRA_EARLIER_SCHEMA_CONFLICT (0x2160)] |
| Error code 8545 | The replication update could not be applied because the source or destination has not yet received information about the recent cross-domain move. [ERROR_DS_DRA_OBJ_NC_MISMATCH (0x2161)] |
| Error code 8546 | The requested domain could not be deleted because there are domain controllers still hosting this domain. [ERROR_DS_NC_STILL_HAS_DSAS (0x2162)] |
| Error code 8547 | The requested operation can only be performed on a global catalog server. [ERROR_DS_GC_REQUIRED (0x2163)] |
| Error code 8548 | A local group can only be a member of other local groups in the same domain. [ERROR_DS_LOCAL_MEMBER_OF_LOCAL_ONLY (0x2164)] |
| Error code 8549 | Foreign security principles cannot be members of global groups. [ERROR_DS_NO_FPO_IN_UNIVERSAL_GROUPS (0x2165)] |
| Error code 8550 | Copying the attribute to the GC is not allowed for security reasons. [ERROR_DS_CANT_ADD_TO_GC (0x2166)] |
| Error code 8551 | The checkpoint could not be taken with the PDC because there are too many modifications currently being processed. [ERROR_DS_NO_CHECKPOINT_WITH_PDC (0x2167)] |
| Error code 8552 | The operation requires source domain auditing to be enabled. [ERROR_DS_SOURCE_AUDITING_NOT_ENABLED (0x2168)] |
| Error code 8553 | Security core objects can only be created within domain naming contexts. [ERROR_DS_CANT_CREATE_IN_NONDOMAIN_NC (0x2169)] |
| Error code 8554 | The Service Principal Name (SPN) could not be created because the provided hostname is not in the necessary format. [ERROR_DS_INVALID_NAME_FOR_SPN (0x216A)] |
| Error code 8555 | A filter was passed that uses the configured attributes. [ERROR_DS_FILTER_USES_CONTRUCTED_ATTRS (0x216B)] |
| Error code 8556 | The unicodePwd attribute value must be enclosed in quotes. [ERROR_DS_UNICODEPWD_NOT_IN_QUOTES (0x216C)] |
| Error code 8557 | Your computer could not be joined to the domain. You have exceeded the maximum number of computer accounts you are allowed to create in this domain. Contact your system administrator to reset or increase this limit. [ERROR_DS_MACHINE_ACCOUNT_QUOTA_EXCEEDED (0x216D)] |
| Error code 8558 | For security reasons, the process must run on the destination DC. [ERROR_DS_MUST_BE_RUN_ON_DST_DC (0x216E)] |
| Error code 8559 | For security reasons, the DC power supply must be NT4SP4 or higher. [ERROR_DS_SRC_DC_MUST_BE_SP4_OR_GREATER (0x216F)] |
| Error code 8560 | Critical Directory Service System objects cannot be deleted during tree delete operations. The tree delete may have been partially performed. [ERROR_DS_CANT_TREE_DELETE_CRITICAL_OBJ (0x2170)] |
| Error code 8561 | Directory Services could not be started due to the following error: |
| Error code 8562 | Security Account Management initialization failed with the following error: |
| Error code 8563 | The installed operating system version is incompatible with the current functional level of the cluster. You must upgrade to a newer operating system version before this server can become a domain controller in this cluster. [ERROR_DS_FOREST_VERSION_TOO_HIGH (0x2173)] |
| Error code 8564 | The installed operating system version is incompatible with the functional level of the current domain. You must upgrade to a new operating system version before this server can become a domain controller in this domain. [ERROR_DS_DOMAIN_VERSION_TOO_HIGH (0x2174)] |
| Error code 8565 | The operating system version installed on this server no longer supports the current forest functional level. The forest functional level must be raised before this server can become a domain controller in this forest. [ERROR_DS_FOREST_VERSION_TOO_LOW (0x2175)] |
| Error code 8566 | The operating system version installed on this server no longer supports the current domain functional level. The domain functional level must be elevated before this server can become a domain controller in this domain. [ERROR_DS_DOMAIN_VERSION_TOO_LOW (0x2176)] |
| Error code 8567 | The operating system version installed on this server is incompatible with the functional level of the domain or forest. [ERROR_DS_INCOMPATIBLE_VERSION (0x2177)] |
| Error code 8568 | The functional level of the domain (or forest) cannot be raised to the required value because one or more domain controllers in the domain (or forest) are at a lower, incompatible functional level. [ERROR_DS_LOW_DSA_VERSION (0x2178)] |
| Error code 8569 | The functional level of the cluster cannot be raised to the desired value because one or more domains are still in mixed domain mode. All domains in the forest must be in native mode to raise the functional level of the cluster. [ERROR_DS_NO_BEHAVIOR_VERSION_IN_MIXEDDOMAIN (0x2179)] |
| Error code 8570 | The requested sort order is not supported. [ERROR_DS_NOT_SUPPORTED_SORT_ORDER (0x217A)] |
| Error code 8571 | The requested name already exists as a unique identifier. [ERROR_DS_NAME_NOT_UNIQUE (0x217B)] |
| Error code 8572 | The machine account was created before NT4. The account must be recreated. [ERROR_DS_MACHINE_ACCOUNT_CREATED_PRENT4 (0x217C)] |
| Error code 8573 | The database is out of the version store. [ERROR_DS_OUT_OF_VERSION_STORE (0x217D)] |
| Error code 8574 | Unable to continue the operation because multiple conflicting controls are being used. [ERROR_DS_INCOMPATIBLE_CONTROLS_USED (0x217E)] |
| Error code 8575 | A valid security descriptor reference domain could not be found for this partition. [ERROR_DS_NO_REF_DOMAIN (0x217F)] |
| Error code 8576 | Schema update failed |
| Error code 8577 | Schema update failed |
| Error code 8578 | The account group cannot have a universal group as a member. [ERROR_DS_AG_CANT_HAVE_UNIVERSAL_MEMBER (0x2182)] |
| Error code 8579 | Rename or move operations on label context headers or read-only objects are not allowed. [ERROR_DS_MODIFYDN_DISALLOWED_BY_INSTANCE_TYPE (0x2183)] |
| Error code 8580 | Move operations are not allowed on objects in the schema label context. [ERROR_DS_NO_OBJECT_MOVE_IN_SCHEMA_NC (0x2184)] |
| Error code 8581 | The system flag is set on the object and does not allow the object to be moved or renamed. [ERROR_DS_MODIFYDN_DISALLOWED_BY_FLAG (0x2185)] |
| Error code 8582 | This object is not allowed to change its ancestral container. Moves to this object are not prohibited but are restricted to sibling containers. [ERROR_DS_MODIFYDN_WRONG_GRANDPARENT (0x2186)] |
| Error code 8583 | Unable to fully resolve a referral to another group. [ERROR_DS_NAME_ERROR_TRUST_REFERRAL (0x2187)] |
| Error code 8584 | The requested action is not supported on the standard server. [ERROR_NOT_SUPPORTED_ON_STANDARD_SERVER (0x2188)] |
| Error code 8585 | A directory service partition on a remote server could not be accessed. Ensure that at least one server for the partition in question is running. [ERROR_DS_CANT_ACCESS_REMOTE_PART_OF_AD (0x2189)] |
| Error code 8586 | The directory cannot validate the proposed naming context (or partition) name because it does not have a replica and cannot contact a replica of the naming context above the proposed naming context. Please ensure that the original naming context is properly registered in DNS and that at least one replica of this naming context is reachable by the primary domain name. [ERROR_DS_CR_IMPOSSIBLE_TO_VALIDATE_V2 (0x218A)] |
| Error code 8587 | The thread limit for this request has been exceeded. [ERROR_DS_THREAD_LIMIT_EXCEEDED (0x218B)] |
| Error code 8588 | The global catalog server is not in the closest location. [ERROR_DS_NOT_CLOSEST (0x218C)] |
| Error code 8589 | The DS cannot derive a Service Principal Name (SPN) by which to mutually authenticate the target server because the corresponding server object in the local DS database does not have a serverReference attribute. [ERROR_DS_CANT_DERIVE_SPN_WITHOUT_SERVER_REF (0x218D)] |
| Error code 8590 | The directory service failed to enter single user mode. [ERROR_DS_SINGLE_USER_MODE_FAILED (0x218E)] |
| Error code 8591 | The directory service cannot parse the script due to a syntax error. [ERROR_DS_NTDSCRIPT_SYNTAX_ERROR (0x218F)] |
| Error code 8592 | The directory service could not process the script due to an error. [ERROR_DS_NTDSCRIPT_PROCESS_ERROR (0x2190)] |
| Error code 8593 | The directory service cannot perform the requested operation because the servers involved have different replication intervals (which is typically associated with a domain rename in progress). [ERROR_DS_DIFFERENT_REPL_EPOCHS (0x2191)] |
| Error code 8594 | The directory service binding must be renegotiated due to a change in the server extensions information. [ERROR_DS_DRS_EXTENSIONS_CHANGED (0x2192)] |
| Error code 8595 | Operation not allowed on the disabled cross reference. [ERROR_DS_REPLICA_SET_CHANGE_NOT_ALLOWED_ON_DISABLED_CR (0x2193)] |
| Error code 8596 | Schema update failed |
| Error code 8597 | Schema update failed |
| Error code 8598 | Failed to delete the chart |
| Error code 8599 | The directory service failed to authorize the request. [ERROR_DS_AUTHORIZATION_FAILED (0x2197)] |
| Error code 8600 | The directory service cannot process the script because it is invalid. [ERROR_DS_INVALID_SCRIPT (0x2198)] |
| Error code 8601 | The remote cross-reference creation operation on the Domain Naming Master FSMO failed. Operation error in extended data. [ERROR_DS_REMOTE_CROSSREF_OP_FAILED (0x2199)] |
| Error code 8602 | A cross-reference with the same name is in use locally. [ERROR_DS_CROSS_REF_BUSY (0x219A)] |
| Error code 8603 | The DS cannot derive a Service Principal Name (SPN) by which to mutually authenticate the target server because the server's domain has been deleted from the forest. [ERROR_DS_CANT_DERIVE_SPN_FOR_DELETED_DOMAIN (0x219B)] |
| Error code 8604 | Writable NC prevents this DC from decreasing. [ERROR_DS_CANT_DEMOTE_WITH_WRITEABLE_NC (0x219C)] |
| Error code 8605 | The requested object has a non-unique ID and cannot be retrieved. [ERROR_DS_DUPLICATE_ID_FOUND (0x219D)] |
| Error code 8606 | Insufficient attributes were given to create an object. This object may not exist because it may have been deleted and already compiled. [ERROR_DS_INSUFFICIENT_ATTR_TO_CREATE_OBJECT (0x219E)] |
| Error code 8607 | The group cannot be converted due to attribute restrictions on the requested group type. [ERROR_DS_GROUP_CONVERSION_ERROR (0x219F)] |
| Error code 8608 | Cross-domain moves are not allowed for non-empty basic application groups. [ERROR_DS_CANT_MOVE_APP_BASIC_GROUP (0x21A0)] |
| Error code 8609 | Cross-domain moves are not allowed for application groups based on non-empty queries. [ERROR_DS_CANT_MOVE_APP_QUERY_GROUP (0x21A1)] |
| Error code 8610 | The ownership of the FSMO role could not be verified because its directory partition was not successfully replicated to at least one replication partner. [ERROR_DS_ROLE_NOT_VERIFIED (0x21A2)] |
| Error code 8611 | The target container for a known object container redirect cannot already be a special container. [ERROR_DS_WKO_CONTAINER_CANNOT_BE_SPECIAL (0x21A3)] |
| Error code 8612 | The directory service cannot perform the requested operation because a domain rename operation is in progress. [ERROR_DS_DOMAIN_RENAME_IN_PROGRESS (0x21A4)] |
| Error code 8613 | The directory service detected a child partition under the requested new partition name. The partition hierarchy must be created top-down. [ERROR_DS_EXISTING_AD_CHILD_NC (0x21A5)] |
| Error code 8614 | The directory service cannot replicate to this server because the time since the last replication to this server exceeded the tombstone lifetime. [ERROR_DS_REPL_LIFETIME_EXCEEDED (0x21A6)] |
| Error code 8615 | The requested operation is not permitted on an object within the system container. [ERROR_DS_DISALLOWED_IN_SYSTEM_CONTAINER (0x21A7)] |
| Error code 8616 | The LDAP servers' send queue is full because the client is not processing the results of its requests quickly enough. No further requests will be processed until the client realizes this. If the client does not catch up, it will be disconnected. [ERROR_DS_LDAP_SEND_QUEUE_FULL (0x21A8)] |
| Error code 8617 | The scheduled replication did not occur because the system was too busy to perform the request within the schedule. The replication queue was overloaded. Consider reducing the number of partners or reducing the frequency of scheduled replication. [ERROR_DS_DRA_OUT_SCHEDULE_WINDOW (0x21A9)] |
| Error code 8618 | At this time, it is not possible to determine whether the branch replication policy is available on the hub domain controller. Please try again later to calculate replication latency. [ERROR_DS_POLICY_NOT_KNOWN (0x21AA)] |
| Error code 8619 | The site settings object for the specified site does not exist. [ERROR_NO_SITE_SETTINGS_OBJECT (0x21AB)] |
| Error code 8620 | The local account store does not contain secrets for the specified account. [ERROR_NO_SECRETS (0x21AC)] |
| Error code 8621 | A writable domain controller could not be found in the domain. [ERROR_NO_WRITABLE_DC_FOUND (0x21AD)] |
| Error code 8622 | The server object for the domain controller does not exist. [ERROR_DS_NO_SERVER_OBJECT (0x21AE)] |
| Error code 8623 | The NTDS settings object for the domain controller does not exist. [ERROR_DS_NO_NTDSA_OBJECT (0x21AF)] |
| Error code 8624 | The requested search operation is not supported for ASQ searches. [ERROR_DS_NON_ASQ_SEARCH (0x21B0)] |
| Error code 8625 | A required audit event could not be created for the operation. [ERROR_DS_AUDIT_FAILURE (0x21B1)] |
| Error code 8626 | Invalid attribute search flags. The subtree index bit is only valid for single-valued attributes. [ERROR_DS_INVALID_SEARCH_FLAG_SUBTREE (0x21B2)] |
| Error code 8627 | Invalid attribute search flags. The tuple index bit is only valid on Unicode string attributes. [ERROR_DS_INVALID_SEARCH_FLAG_TUPLE (0x21B3)] |
| Error code 8628 | Address books are nested too deeply. Failed to create hierarchy table. [ERROR_DS_HIERARCHY_TABLE_TOO_DEEP (0x21B4)] |
| Error code 8629 | The specified updated vector is corrupted. [ERROR_DS_DRA_CORRUPT_UTD_VECTOR (0x21B5)] |
| Error code 8630 | The request to copy secrets was denied. [ERROR_DS_DRA_SECRETS_DENIED (0x21B6)] |
| Error code 8631 | Schema update failed |
| Error code 8632 | Schema update failed |
| Error code 8633 | The replication operation failed because required attributes for the local krbtgt object are missing. [ERROR_DS_DRA_MISSING_KRBTGT_SECRET (0x21B9)] |
| Error code 9001 | The DNS server was unable to interpret the format. [DNS_ERROR_RCODE_FORMAT_ERROR (0x2329)] |
| Error code 9002 | DNS server failure. [DNS_ERROR_RCODE_SERVER_FAILURE (0x232A)] |
| Error code 9003 | DNS name not found. [DNS_ERROR_RCODE_NAME_ERROR (0x232B)] |
| Error code 9004 | The DNS request is not supported by the name server. [DNS_ERROR_RCODE_NOT_IMPLEMENTED (0x232C)] |
| Error code 9005 | DNS operation refused. [DNS_ERROR_RCODE_REFUSED (0x232D)] |
| Error code 9006 | A DNS name that should not exist does not exist. [DNS_ERROR_RCODE_YXDOMAIN (0x232E)] |
| Error code 9007 | The DNS RR set that should not exist does not exist. [DNS_ERROR_RCODE_YXRRSET (0x232F)] |
| Error code 9008 | The DNS RR set that should be present does not exist. [DNS_ERROR_RCODE_NXRRSET (0x2330)] |
| Error code 9009 | The DNS server is not authoritative for the zone. [DNS_ERROR_RCODE_NOTAUTH (0x2331)] |
| Error code 9010 | The DNS name being updated or prereq is not in the zone. [DNS_ERROR_RCODE_NOTZONE (0x2332)] |
| Error code 9016 | DNS signature verification failed. [DNS_ERROR_RCODE_BADSIG (0x2338)] |
| Error code 9017 | Invalid DNS key. [DNS_ERROR_RCODE_BADKEY (0x2339)] |
| Error code 9018 | DNS signature expired. [DNS_ERROR_RCODE_BADTIME (0x233A)] |
| Error code 9501 | No records were found for the specified DNS query. [DNS_INFO_NO_RECORDS (0x251D)] |
| Error code 9502 | The DNS packet is corrupted. [DNS_ERROR_BAD_PACKET (0x251E)] |
| Error code 9503 | No DNS packet found. [DNS_ERROR_NO_PACKET (0x251F)] |
| Error code 9504 | DNS Error Check Rcode. [DNS_ERROR_RCODE (0x2520)] |
| Error code 9505 | DNS packet is not secure. [DNS_ERROR_UNSECURE_PACKET (0x2521)] |
| Error code 9551 | Invalid DNS type. [DNS_ERROR_INVALID_TYPE (0x254F)] |
| Error code 9552 | Invalid IP address. [DNS_ERROR_INVALID_IP_ADDRESS (0x2550)] |
| Error code 9553 | Invalid property. [DNS_ERROR_INVALID_PROPERTY (0x2551)] |
| Error code 9554 | Try DNS again later. [DNS_ERROR_TRY_AGAIN_LATER (0x2552)] |
| Error code 9555 | The record for the given name and type is not unique. [DNS_ERROR_NOT_UNIQUE (0x2553)] |
| Error code 9556 | The DNS name does not conform to the RFC specification. [DNS_ERROR_NON_RFC_NAME (0x2554)] |
| Error code 9557 | The DNS name is a fully qualified DNS name. [DNS_STATUS_FQDN (0x2555)] |
| Error code 9558 | Dotted DNS name (multi-class). [DNS_STATUS_DOTTED_NAME (0x2556)] |
| Error code 9559 | The DNS name is a single-part name. [DNS_STATUS_SINGLE_PART_NAME (0x2557)] |
| Error code 9560 | The DNS name contains an invalid character. [DNS_ERROR_INVALID_NAME_CHAR (0x2558)] |
| Error code 9561 | The DNS name is all numeric. [DNS_ERROR_NUMERIC_NAME (0x2559)] |
| Error code 9562 | The requested operation is not allowed on the DNS root server. [DNS_ERROR_NOT_ALLOWED_ON_ROOT_SERVER (0x255A)] |
| Error code 9563 | The record could not be created because this part of the DNS namespace has been delegated to another server. [DNS_ERROR_NOT_ALLOWED_UNDER_DELEGATION (0x255B)] |
| Error code 9564 | The DNS server could not find a set of root hints. [DNS_ERROR_CANNOT_FIND_ROOT_HINTS (0x255C)] |
| Error code 9565 | The DNS server found root hints, but they were inconsistent across all adapters. [DNS_ERROR_INCONSISTENT_ROOT_HINTS (0x255D)] |
| Error code 9566 | The specified value is too small for this parameter. [DNS_ERROR_DWORD_VALUE_TOO_SMALL (0x255E)] |
| Error code 9567 | The specified value is too large for this parameter. [DNS_ERROR_DWORD_VALUE_TOO_LARGE (0x255F)] |
| Error code 9568 | This operation is not allowed while the DNS server is loading zones in the background. Please try again later. [DNS_ERROR_BACKGROUND_LOADING (0x2560)] |
| Error code 9569 | The requested operation is not permitted on a DNS server running on a read-only domain controller (DC). [DNS_ERROR_NOT_ALLOWED_ON_RODC (0x2561)] |
| Error code 9570 | Data is not allowed under a DNAME record. [DNS_ERROR_NOT_ALLOWED_UNDER_DNAME (0x2562)] |
| Error code 9571 | This operation requires credential delegation. [DNS_ERROR_DELEGATION_REQUIRED (0x2563)] |
| Error code 9601 | DNS zone does not exist. [DNS_ERROR_ZONE_DOES_NOT_EXIST (0x2581)] |
| Error code 9602 | DNS zone information is not available. [DNS_ERROR_NO_ZONE_INFO (0x2582)] |
| Error code 9603 | Invalid DNS zone operation. [DNS_ERROR_INVALID_ZONE_OPERATION (0x2583)] |
| Error code 9604 | Invalid DNS zone configuration. [DNS_ERROR_ZONE_CONFIGURATION_ERROR (0x2584)] |
| Error code 9605 | The DNS zone has no Start of Authority (SOA) record. [DNS_ERROR_ZONE_HAS_NO_SOA_RECORD (0x2585)] |
| Error code 9606 | The DNS zone has no name server (NS) record. [DNS_ERROR_ZONE_HAS_NO_NS_RECORDS (0x2586)] |
| Error code 9607 | DNS zone locked. [DNS_ERROR_ZONE_LOCKED (0x2587)] |
| Error code 9608 | DNS zone creation failed. [DNS_ERROR_ZONE_CREATION_FAILED (0x2588)] |
| Error code 9609 | The DNS zone already exists. [DNS_ERROR_ZONE_ALREADY_EXISTS (0x2589)] |
| Error code 9610 | The automatic DNS zone already exists. [DNS_ERROR_AUTOZONE_ALREADY_EXISTS (0x258A)] |
| Error code 9611 | Invalid DNS zone type. [DNS_ERROR_INVALID_ZONE_TYPE (0x258B)] |
| Error code 9612 | The secondary DNS zone requires the primary IP address. [DNS_ERROR_SECONDARY_REQUIRES_MASTER_IP (0x258C)] |
| Error code 9613 | The DNS zone is not secondary. [DNS_ERROR_ZONE_NOT_SECONDARY (0x258D)] |
| Error code 9614 | You need a secondary IP address. [DNS_ERROR_NEED_SECONDARY_ADDRESSES (0x258E)] |
| Error code 9615 | WINS initialization failed. [DNS_ERROR_WINS_INIT_FAILED (0x258F)] |
| Error code 9616 | WINS servers are needed. [DNS_ERROR_NEED_WINS_SERVERS (0x2590)] |
| Error code 9617 | NBTSTAT initialization call failed. [DNS_ERROR_NBSTAT_INIT_FAILED (0x2591)] |
| Error code 9618 | Invalid deletion of start of authority (SOA) [DNS_ERROR_SOA_DELETE_INVALID (0x2592)] |
| Error code 9619 | A conditional forwarding zone already exists for this name. [DNS_ERROR_FORWARDER_ALREADY_EXISTS (0x2593)] |
| Error code 9620 | This zone must be configured with one or more primary DNS server IP addresses. [DNS_ERROR_ZONE_REQUIRES_MASTER_IP (0x2594)] |
| Error code 9621 | The operation cannot be performed because this zone is closed. [DNS_ERROR_ZONE_IS_SHUTDOWN (0x2595)] |
| Error code 9651 | The primary DNS zone requires a data file. [DNS_ERROR_PRIMARY_REQUIRES_DATAFILE (0x25B3)] |
| Error code 9652 | Invalid data file name for DNS zone. [DNS_ERROR_INVALID_DATAFILE_NAME (0x25B4)] |
| Error code 9653 | Failed to open the data file for the DNS zone. [DNS_ERROR_DATAFILE_OPEN_FAILURE (0x25B5)] |
| Error code 9654 | Failed to write data file for DNS zone. [DNS_ERROR_FILE_WRITEBACK_FAILED (0x25B6)] |
| Error code 9655 | Failed reading data file for DNS zone. [DNS_ERROR_DATAFILE_PARSING (0x25B7)] |
| Error code 9701 | DNS record does not exist. [DNS_ERROR_RECORD_DOES_NOT_EXIST (0x25E5)] |
| Error code 9702 | DNS record format error. [DNS_ERROR_RECORD_FORMAT (0x25E6)] |
| Error code 9703 | Failed to create node in DNS. [DNS_ERROR_NODE_CREATION_FAILED (0x25E7)] |
| Error code 9704 | Unknown DNS record type. [DNS_ERROR_UNKNOWN_RECORD_TYPE (0x25E8)] |
| Error code 9705 | DNS record timed out. [DNS_ERROR_RECORD_TIMED_OUT (0x25E9)] |
| Error code 9706 | The name is not in the DNS zone. [DNS_ERROR_NAME_NOT_IN_ZONE (0x25EA)] |
| Error code 9707 | CNAME loop detected. [DNS_ERROR_CNAME_LOOP (0x25EB)] |
| Error code 9708 | The node is a CNAME DNS record. [DNS_ERROR_NODE_IS_CNAME (0x25EC)] |
| Error code 9709 | A CNAME record already exists for the specified name. [DNS_ERROR_CNAME_COLLISION (0x25ED)] |
| Error code 9710 | Record only at the root of the DNS zone. [DNS_ERROR_RECORD_ONLY_AT_ZONE_ROOT (0x25EE)] |
| Error code 9711 | DNS record already exists. [DNS_ERROR_RECORD_ALREADY_EXISTS (0x25EF)] |
| Error code 9712 | Secondary DNS zone data error. [DNS_ERROR_SECONDARY_DATA (0x25F0)] |
| Error code 9713 | The DNS cache data could not be created. [DNS_ERROR_NO_CREATE_CACHE_DATA (0x25F1)] |
| Error code 9714 | DNS name does not exist. [DNS_ERROR_NAME_DOES_NOT_EXIST (0x25F2)] |
| Error code 9715 | The pointer record (PTR) could not be created. [DNS_WARNING_PTR_CREATE_FAILED (0x25F3)] |
| Error code 9716 | DNS domain deletion was canceled. [DNS_WARNING_DOMAIN_UNDELETED (0x25F4)] |
| Error code 9717 | Directory service is unavailable. [DNS_ERROR_DS_UNAVAILABLE (0x25F5)] |
| Error code 9718 | The DNS zone already exists in the directory service. [DNS_ERROR_DS_ZONE_ALREADY_EXISTS (0x25F6)] |
| Error code 9719 | The DNS server does not create or read the boot file for the directory service-integrated DNS zone. [DNS_ERROR_NO_BOOTFILE_IF_DS_ZONE (0x25F7)] |
| Error code 9720 | The node is a DNAME DNS record. [DNS_ERROR_NODE_IS_DNAME (0x25F8)] |
| Error code 9721 | A DNAME record already exists for the specified name. [DNS_ERROR_DNAME_COLLISION (0x25F9)] |
| Error code 9722 | An alias loop was detected with CNAME or DNAME records. [DNS_ERROR_ALIAS_LOOP (0x25FA)] |
| Error code 9751 | DNS AXFR (zone transfer) completed. [DNS_INFO_AXFR_COMPLETE (0x2617)] |
| Error code 9752 | DNS zone transfer failed. [DNS_ERROR_AXFR (0x2618)] |
| Error code 9753 | A local WINS server has been added. [DNS_INFO_ADDED_LOCAL_WINS (0x2619)] |
| Error code 9801 | Secure update callback needs to continue the update request. [DNS_STATUS_CONTINUE_NEEDED (0x2649)] |
| Error code 9851 | The TCP/IP network protocol is not installed. [DNS_ERROR_NO_TCPIP (0x267B)] |
| Error code 9852 | No DNS servers are configured for the local system. [DNS_ERROR_NO_DNS_SERVERS (0x267C)] |
| Error code 9901 | The specified directory partition does not exist. [DNS_ERROR_DP_DOES_NOT_EXIST (0x26AD)] |
| Error code 9902 | The specified directory partition already exists. [DNS_ERROR_DP_ALREADY_EXISTS (0x26AE)] |
| Error code 9903 | This DNS server is not listed in the specified directory partition. [DNS_ERROR_DP_NOT_ENLISTED (0x26AF)] |
| Error code 9904 | This DNS server is already listed in the specified directory partition. [DNS_ERROR_DP_ALREADY_ENLISTED (0x26B0)] |
| Error code 9905 | The directory section is unavailable at this time. Please wait a few minutes and try again. [DNS_ERROR_DP_NOT_AVAILABLE (0x26B1)] |
| Error code 9906 | The application directory partition operation failed. The domain controller holding the domain naming primary role is down, unable to service the request, or is not running Windows Server 2003. [DNS_ERROR_DP_FSMO_ERROR (0x26B2)] |
| Error code 10004 | The blocking process was interrupted by calling WSACancelBlockingCall. [WSAEINTR (0x2714)] |
| Error code 10009 | The supplied file handle is invalid. [WSAEBADF (0x2719)] |
| Error code 10013 | An attempt was made to access a socket in a manner prohibited by its access permissions. [WSAEACCES (0x271D)] |
| Error code 10014 | The system detected an invalid pointer address while attempting to use a pointer argument in a call. [WSAEFAULT (0x271E)] |
| Error code 10022 | An invalid argument was supplied. [WSAEINVAL (0x2726)] |
| Error code 10024 | Too many open sockets. [WSAEMFILE (0x2728)] |
| Error code 10035 | The non-blocking socket operation could not be completed immediately. [WSAEWOULDBLOCK (0x2733)] |
| Error code 10036 | A blocking operation is currently in progress. [WSAEINPROGRESS (0x2734)] |
| Error code 10037 | An operation was attempted on a non-blocking socket that already has a process in progress. [WSAEALREADY (0x2735)] |
| Error code 10038 | An operation was attempted on something that is not a socket. [WSAENOTSOCK (0x2736)] |
| Error code 10039 | The requested address was deleted from a process on a socket. [WSAEDESTADDRREQ (0x2737)] |
| Error code 10040 | The message sent on the datagram socket was larger than the internal message buffer or other network limit, or the buffer used to receive the datagram was smaller than the datagram itself. [WSAEMSGSIZE (0x2738)] |
| Error code 10041 | A protocol was specified in a socket function call that does not support the requested socket type semantics. [WSAEPROTOTYPE (0x2739)] |
| Error code 10042 | An invalid or unsupported unknown option or level was specified in a getockopt or setsockopt call. [WSAENOPROTOOPT (0x273A)] |
| Error code 10043 | The required protocol is not configured on the system or is not implemented. [WSAEPROTONOSUPPORT (0x273B)] |
| Error code 10044 | The specified socket type is not supported in this address family. [WSAESOCKTNOSUPPORT (0x273C)] |
| Error code 10045 | The operation you attempted is not supported for the object type referenced. [WSAEOPNOTSUPP (0x273D)] |
| Error code 10046 | The protocol family is not configured in the system or is not implemented. [WSAEPFNOSUPPORT (0x273E)] |
| Error code 10047 | An address used that is not compatible with the requested protocol. [WSAEAFNOSUPPORT (0x273F)] |
| Error code 10048 | Normally, only one use is allowed per socket address (protocol/network address/port). [WSAEADDRINUSE (0x2740)] |
| Error code 10049 | The requested address is invalid in its context. [WSAEADDRNOTAVAIL (0x2741)] |
| Error code 10050 | A network socket operation encountered a dead connection. [WSAENETDOWN (0x2742)] |
| Error code 10051 | A socket operation was attempted for an unreachable network. [WSAENETUNREACH (0x2743)] |
| Error code 10052 | The connection was terminated because the keepalive activity detected a failure during the operation. [WSAENETRESET (0x2744)] |
| Error code 10053 | The established connection was aborted by the software on the host machine. [WSAECONNABORTED (0x2745)] |
| Error code 10054 | An existing connection was forcibly closed by the remote host. [WSAECONNRESET (0x2746)] |
| Error code 10055 | An operation could not be performed on a socket because the system lacked sufficient buffer space or because the queue was full. [WSAENOBUFS (0x2747)] |
| Error code 10056 | A connection request was made on an already connected socket. [WSAEISCONN (0x2748)] |
| Error code 10057 | A request to send or receive data was rejected because the socket is offline and (when sending on a datagram socket using a sendto connection) no address was provided. [WSAENOTCONN (0x2749)] |
| Error code 10058 | A request to send or receive data was rejected because the socket was already closed in that direction with a previous shutdown call. [WSAESHUTDOWN (0x274A)] |
| Error code 10059 | Too many references to some kernel elements. [WSAETOOMANYREFS (0x274B)] |
| Error code 10060 | The connection attempt failed because the calling party did not respond correctly after a period of time, or the established connection failed because the calling host failed to respond. [WSAETIMEDOUT (0x274C)] |
| Error code 10061 | No connection could be made because the target device actually rejected it. [WSAECONNREFUSED (0x274D)] |
| Error code 10062 | The name cannot be translated. [WSAELOOP (0x274E)] |
| Error code 10063 | The name component or name is too long. [WSAENAMETOOLONG (0x274F)] |
| Error code 10064 | The socket operation failed because the destination host was down. [WSAEHOSTDOWN (0x2750)] |
| Error code 10065 | A socket operation was attempted to an unreachable host. [WSAEHOSTUNREACH (0x2751)] |
| Error code 10066 | A directory that is not empty cannot be removed. [WSAENOTEMPTY (0x2752)] |
| Error code 10067 | The Windows Sockets application may have a limit on the number of applications that may use it at one time. [WSAEPROCLIM (0x2753)] |
| Error code 10068 | Quota has run out. [WSAEUSERS (0x2754)] |
| Error code 10069 | Disk quota is out. [WSAEDQUOT (0x2755)] |
| Error code 10070 | The file handle reference is no longer available. [WSAESTALE (0x2756)] |
| Error code 10071 | The item is not available locally. [WSAEREMOTE (0x2757)] |
| Error code 10091 | WSAStartup cannot start at this time because the platform it uses to provide network services is currently unavailable. [WSASYSNOTREADY (0x276B)] |
| Error code 10092 | The required Windows Sockets version is not supported. [WSAVERNOTSUPPORTED (0x276C)] |
| Error code 10093 | Either the application did not call WSAStartup or WSAStartup failed. [WSANOTINITIALISED (0x276D)] |
| Error code 10101 | Returned by WSARecv or WSARecvFrom to indicate that the remote end has initiated a healthy shutdown sequence. [WSAEDISCON (0x2775)] |
| Error code 10102 | No more results could be returned by WSALookupServiceNext. [WSAENOMORE (0x2776)] |
| Error code 10103 | A call to WSALookupServiceEnd was made while processing this call. The call was canceled. [WSAECANCELLED (0x2777)] |
| Error code 10104 | The procedure call table is invalid. [WSAEINVALIDPROCTABLE (0x2778)] |
| Error code 10105 | The requested service provider is invalid. [WSAEINVALIDPROVIDER (0x2779)] |
| Error code 10106 | The requested service provider could not be loaded or initialized. [WSAEPROVIDERFAILEDINIT (0x277A)] |
| Error code 10107 | A system call that should never fail failed. [WSASYSCALLFAILURE (0x277B)] |
| Error code 10108 | No such service is known. The service cannot be found in the specified namespace. [WSASERVICE_NOT_FOUND (0x277C)] |
| Error code 10109 | The specified class was not found. [WSATYPE_NOT_FOUND (0x277D)] |
| Error code 10110 | No more results could be returned by WSALookupServiceNext. [WSA_E_NO_MORE (0x277E)] |
| Error code 10111 | A call to WSALookupServiceEnd was made while processing this call. The call has been canceled. [WSA_E_CANCELLED (0x277F)] |
| Error code 10112 | The database query failed because it was actively rejected. [WSAEREFUSED (0x2780)] |
| Error code 11001 | No such host is known. [WSAHOST_NOT_FOUND (0x2AF9)] |
| Error code 11002 | This is usually a temporary error during hostname resolution and means that the local server did not receive a response from a trusted server. [WSATRY_AGAIN (0x2AFA)] |
| Error code 11003 | An unrecoverable error occurred while searching the database. [WSANO_RECOVERY (0x2AFB)] |
| Error code 11004 | The requested name is valid, but no data of the requested type was found. [WSANO_DATA (0x2AFC)] |
| Error code 11005 | At least one reserve has arrived. [WSA_QOS_RECEIVERS (0x2AFD)] |
| Error code 11006 | At least one path has arrived. [WSA_QOS_SENDERS (0x2AFE)] |
| Error code 11007 | No senders. [WSA_QOS_NO_SENDERS (0x2AFF)] |
| Error code 11008 | No receivers. [WSA_QOS_NO_RECEIVERS (0x2B00)] |
| Error code 11009 | Reserve confirmed. [WSA_QOS_REQUEST_CONFIRMED (0x2B01)] |
| Error code 11010 | Error due to lack of resources. [WSA_QOS_ADMISSION_FAILURE (0x2B02)] |
| Error code 11011 | Rejected for administrative reasons - Bad credentials. [WSA_QOS_POLICY_FAILURE (0x2B03)] |
| Error code 11012 | Unknown or conflicting style. [WSA_QOS_BAD_STYLE (0x2B04)] |
| Error code 11013 | Problem with part of the service provider's filters or buffer in general. [WSA_QOS_BAD_OBJECT (0x2B05)] |
| Error code 11014 | Problem with some part of flowpec. [WSA_QOS_TRAFFIC_CTRL_ERROR (0x2B06)] |
| Error code 11015 | Generic QOS error. [WSA_QOS_GENERIC_ERROR (0x2B07)] |
| Error code 11016 | An invalid or unknown service type was found in the flowpec. [WSA_QOS_ESERVICETYPE (0x2B08)] |
| Error code 11017 | An invalid or inconsistent flowpec was found in the QOS structure. [WSA_QOS_EFLOWSPEC (0x2B09)] |
| Error code 11018 | The QOS provider buffer is invalid. [WSA_QOS_EPROVSPECBUF (0x2B0A)] |
| Error code 11019 | An invalid QOS filter style was used. [WSA_QOS_EFILTERSTYLE (0x2B0B)] |
| Error code 11020 | An invalid QOS filter type was used. [WSA_QOS_EFILTERTYPE (0x2B0C)] |
| Error code 11021 | An incorrect number of QOS FILTERSPECs was specified in the FLOWDESCRIPTOR. [WSA_QOS_EFILTERCOUNT (0x2B0D)] |
| Error code 11022 | An object with an invalid ObjectLength field was specified in the QOS provider buffer. [WSA_QOS_EOBJLENGTH (0x2B0E)] |
| Error code 11023 | An incorrect number of flow descriptors was specified in the QOS structure. [WSA_QOS_EFLOWCOUNT (0x2B0F)] |
| Error code 11024 | An unknown object was found in the QOS provider's buffer. [WSA_QOS_EUNKOWNPSOBJ (0x2B10)] |
| Error code 11025 | An invalid policy object was found in the QOS provider buffer. [WSA_QOS_EPOLICYOBJ (0x2B11)] |
| Error code 11026 | An invalid QOS flow descriptor was found in the flow descriptor list. [WSA_QOS_EFLOWDESC (0x2B12)] |
| Error code 11027 | An invalid or inconsistent flowpec was found in the specified QOS provider buffer. [WSA_QOS_EPSFLOWSPEC (0x2B13)] |
| Error code 11028 | An invalid FILTERSPEC was found in the QOS provider buffer. [WSA_QOS_EPSFILTERSPEC (0x2B14)] |
| Error code 11029 | An invalid shape discard mode object was found in the specified QOS provider buffer. [WSA_QOS_ESDMODEOBJ (0x2B15)] |
| Error code 11030 | An invalid shaping rate object was found in the QOS provider buffer. [WSA_QOS_ESHAPERATEOBJ (0x2B16)] |
| Error code 11031 | A reserved policy element was found in the QOS provider's buffer. [WSA_QOS_RESERVED_PETYPE (0x2B17)] |
| Error code 12001 | No more handles can be created at this time. [ERROR_INTERNET_OUT_OF_HANDLES (0x2EE1)] |
| Error code 12002 | The request has timed out. [ERROR_INTERNET_TIMEOUT (0x2EE2)] |
| Error code 12003 | An extended error was returned from the server. This is typically a string or buffer containing a lengthy error message. Call InternetGetLastResponseInfo to retrieve the error text. [ERROR_INTERNET_EXTENDED_ERROR (0x2EE3)] |
| Error code 12004 | An internal error occurred. [ERROR_INTERNET_INTERNAL_ERROR (0x2EE4)] |
| Error code 12005 | Invalid URL. [ERROR_INTERNET_INVALID_URL (0x2EE5)] |
| Error code 12006 | The URL scheme could not be recognized or is not supported. [ERROR_INTERNET_UNRECOGNIZED_SCHEME (0x2EE6)] |
| Error code 12007 | The server name could not be resolved. [ERROR_INTERNET_NAME_NOT_RESOLVED (0x2EE7)] |
| Error code 12008 | The requested protocol could not be located. [ERROR_INTERNET_PROTOCOL_NOT_FOUND (0x2EE8)] |
| Error code 12009 | A request to InternetQueryOption or InternetSetOption specified an invalid option value. [ERROR_INTERNET_INVALID_OPTION (0x2EE9)] |
| Error code 12010 | The option length supplied to InternetQueryOption or InternetSetOption is incorrect for the specified option type. [ERROR_INTERNET_BAD_OPTION_LENGTH (0x2EEA)] |
| Error code 12011 | The requested option could not be set, it was just queried. [ERROR_INTERNET_OPTION_NOT_SETTABLE (0x2EEB)] |
| Error code 12012 | WinINet support is being turned off or unloaded. [ERROR_INTERNET_SHUTDOWN (0x2EEC)] |
| Error code 12013 | The request to connect to and log in to the FTP server could not be completed because the supplied username is incorrect. [ERROR_INTERNET_INCORRECT_USER_NAME (0x2EED)] |
| Error code 12014 | The request to connect to and log in to the FTP server could not be completed because the supplied password is incorrect. [ERROR_INTERNET_INCORRECT_PASSWORD (0x2EEE)] |
| Error code 12015 | The connection and login request to the FTP server failed. [ERROR_INTERNET_LOGIN_FAILURE (0x2EEF)] |
| Error code 12016 | The requested operation is invalid. [ERROR_INTERNET_INVALID_OPERATION (0x2EF0)] |
| Error code 12017 | The operation was canceled, usually because the handle the request was running on was closed before the operation completed. [ERROR_INTERNET_OPERATION_CANCELLED (0x2EF1)] |
| Error code 12018 | The supplied handle type is incorrect for this operation. [ERROR_INTERNET_INCORRECT_HANDLE_TYPE (0x2EF2)] |
| Error code 12019 | The requested operation cannot be performed because the supplied handle is not in the correct state. [ERROR_INTERNET_INCORRECT_HANDLE_STATE (0x2EF3)] |
| Error code 12020 | The request could not be submitted via a proxy. [ERROR_INTERNET_NOT_PROXY_REQUEST (0x2EF4)] |
| Error code 12021 | The requested registry value could not be located. [ERROR_INTERNET_REGISTRY_VALUE_NOT_FOUND (0x2EF5)] |
| Error code 12022 | The requested registry value was specified but is of an incorrect type or has an invalid value. [ERROR_INTERNET_BAD_REGISTRY_PARAMETER (0x2EF6)] |
| Error code 12023 | Direct network access cannot be performed at this time. [ERROR_INTERNET_NO_DIRECT_ACCESS (0x2EF7)] |
| Error code 12024 | An asynchronous request could not be made because a zero context value was provided. [ERROR_INTERNET_NO_CONTEXT (0x2EF8)] |
| Error code 12025 | An asynchronous request could not be made because the callback function was not set. [ERROR_INTERNET_NO_CALLBACK (0x2EF9)] |
| Error code 12026 | The requested operation could not be completed because one or more requests were pending. [ERROR_INTERNET_REQUEST_PENDING (0x2EFA)] |
| Error code 12027 | The request format is invalid. [ERROR_INTERNET_INCORRECT_FORMAT (0x2EFB)] |
| Error code 12028 | The requested item could not be located. [ERROR_INTERNET_ITEM_NOT_FOUND (0x2EFC)] |
| Error code 12029 | An attempt to connect to the server failed. [ERROR_INTERNET_CANNOT_CONNECT (0x2EFD)] |
| Error code 12030 | The connection to the server was terminated. [ERROR_INTERNET_CONNECTION_ABORTED (0x2EFE)] |
| Error code 12031 | The connection to the server was reset. [ERROR_INTERNET_CONNECTION_RESET (0x2EFF)] |
| Error code 12032 | The function needs to be re-requested. [ERROR_INTERNET_FORCE_RETRY (0x2F00)] |
| Error code 12033 | The request to the proxy is invalid. [ERROR_INTERNET_INVALID_PROXY_REQUEST (0x2F01)] |
| Error code 12034 | A user interface or other blocking operation was requested. [ERROR_INTERNET_NEED_UI (0x2F02)] |
| Error code 12036 | The request failed because the handle already exists. [ERROR_INTERNET_HANDLE_EXISTS (0x2F04)] |
| Error code 12037 | The SSL certificate date received from the server is invalid. The certificate has expired. [ERROR_INTERNET_SEC_CERT_DATE_INVALID (0x2F05)] |
| Error code 12038 | The SSL certificate common name (hostname field) is incorrect – for example, if you enter www.server.com and the common name in the certificate is www.different.com. [ERROR_INTERNET_SEC_CERT_CN_INVALID (0x2F06)] |
| Error code 12039 | The application is switching from a non-SSL connection to an SSL connection due to a redirect. [ERROR_INTERNET_HTTP_TO_HTTPS_ON_REDIR (0x2F07)] |
| Error code 12040 | The application is switching from SSL to a non-SSL connection due to a redirect. [ERROR_INTERNET_HTTPS_TO_HTTP_ON_REDIR (0x2F08)] |
| Error code 12041 | The content is not completely secure. Some of the displayed content may originate from insecure servers. [ERROR_INTERNET_MIXED_SECURITY (0x2F09)] |
| Error code 12042 | The application publishes and attempts to change multiple lines of text on an insecure server. [ERROR_INTERNET_CHG_POST_IS_NON_SECURE (0x2F0A)] |
| Error code 12043 | The application is relaying data to an insecure server. [ERROR_INTERNET_POST_IS_NON_SECURE (0x2F0B)] |
| Error code 12044 | The server requests client authentication. [ERROR_INTERNET_CLIENT_AUTH_CERT_NEEDED (0x2F0C)] |
| Error code 12045 | The function is not familiar with the certificate authority that created the server certificate. [ERROR_INTERNET_INVALID_CA (0x2F0D)] |
| Error code 12046 | Client authorization is not set up on this computer. [ERROR_INTERNET_CLIENT_AUTH_NOT_SETUP (0x2F0E)] |
| Error code 12047 | The application could not start an asynchronous thread. [ERROR_INTERNET_ASYNC_THREAD_FAILED (0x2F0F)] |
| Error code 12048 | The function could not process the redirect because the system changed (for example, from HTTP to FTP). [ERROR_INTERNET_REDIRECT_SCHEME_CHANGE (0x2F10)] |
| Error code 12049 | Another issue has a password dialog in progress. [ERROR_INTERNET_DIALOG_PENDING (0x2F11)] |
| Error code 12050 | The dialog must be retried. [ERROR_INTERNET_RETRY_DIALOG (0x2F12)] |
| Error code 12052 | Data sent to an SSL connection is being redirected to a non-SSL connection. [ERROR_INTERNET_HTTPS_HTTP_SUBMIT_REDIR (0x2F14)] |
| Error code 12053 | The request requires a CD-ROM to be inserted into the CD-ROM drive to locate the requested resource. [ERROR_INTERNET_INSERT_CDROM (0x2F15)] |
| Error code 12054 | The requested resource requires Fortezza authentication. [ERROR_INTERNET_FORTEZZA_LOGIN_NEEDED (0x2F16)] |
| Error code 12055 | The SSL certificate contains errors. [ERROR_INTERNET_SEC_CERT_ERRORS (0x2F17)] |
| Error code 12056 | ERROR_INTERNET_SEC_CERT_REV_FAILED [ERROR_INTERNET_SEC_CERT_NO_REV (0x2F18)] |
| Error code 12110 | The requested operation cannot be performed on the FTP session handler because the operation is already in progress. [ERROR_FTP_TRANSFER_IN_PROGRESS (0x2F4E)] |
| Error code 12111 | The FTP operation did not complete because the session was aborted. [ERROR_FTP_DROPPED (0x2F4F)] |
| Error code 12112 | Passive mode is not available on the server. [ERROR_FTP_NO_PASSIVE_MODE (0x2F50)] |
| Error code 12130 | An error was detected while parsing the data returned from the Gopher server. [ERROR_GOPHER_PROTOCOL_ERROR (0x2F62)] |
| Error code 12131 | The request must be made to the file locator. [ERROR_GOPHER_NOT_FILE (0x2F63)] |
| Error code 12132 | An error was encountered while receiving data from the Gopher server. [ERROR_GOPHER_DATA_ERROR (0x2F64)] |
| Error code 12133 | End of data reached. [ERROR_GOPHER_END_OF_DATA (0x2F65)] |
| Error code 12134 | The provided locator is invalid. [ERROR_GOPHER_INVALID_LOCATOR (0x2F66)] |
| Error code 12135 | The locator type is incorrect for this operation. [ERROR_GOPHER_INCORRECT_LOCATOR_TYPE (0x2F67)] |
| Error code 12136 | The requested operation can only be performed on the Gopher+ server, or using a locator that specifies the Gopher+ process. [ERROR_GOPHER_NOT_GOPHER_PLUS (0x2F68)] |
| Error code 12137 | The requested attribute could not be located. [ERROR_GOPHER_ATTRIBUTE_NOT_FOUND (0x2F69)] |
| Error code 12138 | Unknown locator type. [ERROR_GOPHER_UNKNOWN_LOCATOR (0x2F6A)] |
| Error code 12150 | The requested address could not be located. [ERROR_HTTP_HEADER_NOT_FOUND (0x2F76)] |
| Error code 12151 | The server did not return any headers. [ERROR_HTTP_DOWNLEVEL_SERVER (0x2F77)] |
| Error code 12152 | Unable to parse server response. [ERROR_HTTP_INVALID_SERVER_RESPONSE (0x2F78)] |
| Error code 12153 | The supplied header is invalid. [ERROR_HTTP_INVALID_HEADER (0x2F79)] |
| Error code 12154 | The request to HttpQueryInfo is invalid. [ERROR_HTTP_INVALID_QUERY_REQUEST (0x2F7A)] |
| Error code 12155 | The header could not be added because it already exists. [ERROR_HTTP_HEADER_ALREADY_EXISTS (0x2F7B)] |
| Error code 12156 | The redirect failed either because the system changed (for example, HTTP to FTP) or all attempts to redirect failed (the default is five attempts). [ERROR_HTTP_REDIRECT_FAILED (0x2F7C)] |
| Error code 12157 | The application encountered an internal error while loading the SSL libraries. [ERROR_INTERNET_SECURITY_CHANNEL_ERROR (0x2F7D)] |
| Error code 12158 | The function was unable to cache the file. [ERROR_INTERNET_UNABLE_TO_CACHE_FILE (0x2F7E)] |
| Error code 12159 | The required protocol stack was not loaded and the application cannot start WinSock. [ERROR_INTERNET_TCPIP_NOT_INSTALLED (0x2F7F)] |
| Error code 12160 | The HTTP request was not redirected. [ERROR_HTTP_NOT_REDIRECTED (0x2F80)] |
| Error code 12161 | The HTTP cookie requires confirmation. [ERROR_HTTP_COOKIE_NEEDS_CONFIRMATION (0x2F81)] |
| Error code 12162 | The HTTP cookie was rejected by the server. [ERROR_HTTP_COOKIE_DECLINED (0x2F82)] |
| Error code 12163 | Internet connection was lost. [ERROR_INTERNET_DISCONNECTED (0x2F83)] |
| Error code 12164 | The indicated website or server cannot be reached. [ERROR_INTERNET_SERVER_UNREACHABLE (0x2F84)] |
| Error code 12165 | The specified proxy server cannot be reached. [ERROR_INTERNET_PROXY_SERVER_UNREACHABLE (0x2F85)] |
| Error code 12166 | An error occurred in the automatic proxy configuration script. [ERROR_INTERNET_BAD_AUTO_PROXY_SCRIPT (0x2F86)] |
| Error code 12167 | The automatic proxy configuration script could not be downloaded. The INTERNET_FLAG_MUST_CACHE_REQUEST flag is set. [ERROR_INTERNET_UNABLE_TO_DOWNLOAD_SCRIPT (0x2F87)] |
| Error code 12168 | Redirection requires user confirmation. [ERROR_HTTP_REDIRECT_NEEDS_CONFIRMATION (0x2F88)] |
| Error code 12169 | Invalid SSL certificate. [ERROR_INTERNET_SEC_INVALID_CERT (0x2F89)] |
| Error code 12170 | The SSL certificate has been revoked. [ERROR_INTERNET_SEC_CERT_REVOKED (0x2F8A)] |
| Error code 12171 | The function failed due to a security check. [ERROR_INTERNET_FAILED_DUETOSECURITYCHECK (0x2F8B)] |
| Error code 12172 | WinINet API initialization did not occur. This indicates that a higher-level function, such as InternetOpen, has not been called yet. [ERROR_INTERNET_NOT_INITIALIZED (0x2F8C)] |
| Error code 12173 | Not currently applicable. [ERROR_INTERNET_NEED_MSN_SSPI_PKG (0x2F8D)] |
| Error code 12174 | An MS-Logoff summary header was returned from a website. [ERROR_INTERNET_LOGIN_FAILURE_DISPLAY_ENTITY_BODY (0x2F8E)] |
| Error code 12175 | WinINet failed to perform content decoding on the response. For more information, see the Content Encoding topic. [ERROR_INTERNET_DECODING_FAILED (0x2F8F)] |
| Error code 13000 | The specified fast mode policy already exists. [ERROR_IPSEC_QM_POLICY_EXISTS (0x32C8)] |
| Error code 13001 | The specified fast mode policy was not found. [ERROR_IPSEC_QM_POLICY_NOT_FOUND (0x32C9)] |
| Error code 13002 | The specified express mode policy is being used. [ERROR_IPSEC_QM_POLICY_IN_USE (0x32CA)] |
| Error code 13003 | The specified master mode policy already exists. [ERROR_IPSEC_MM_POLICY_EXISTS (0x32CB)] |
| Error code 13004 | The specified master mode policy was not found [ERROR_IPSEC_MM_POLICY_NOT_FOUND (0x32CC)] |
| Error code 13005 | The specified master mode policy is being used. [ERROR_IPSEC_MM_POLICY_IN_USE (0x32CD)] |
| Error code 13006 | The specified main mode filter already exists. [ERROR_IPSEC_MM_FILTER_EXISTS (0x32CE)] |
| Error code 13007 | The specified main mode filter was not found. [ERROR_IPSEC_MM_FILTER_NOT_FOUND (0x32CF)] |
| Error code 13008 | The specified transport mode filter already exists. [ERROR_IPSEC_TRANSPORT_FILTER_EXISTS (0x32D0)] |
| Error code 13009 | The specified transport mode filter does not exist. [ERROR_IPSEC_TRANSPORT_FILTER_NOT_FOUND (0x32D1)] |
| Error code 13010 | The specified master mode authentication list exists. [ERROR_IPSEC_MM_AUTH_EXISTS (0x32D2)] |
| Error code 13011 | The specified master mode authentication list was not found. [ERROR_IPSEC_MM_AUTH_NOT_FOUND (0x32D3)] |
| Error code 13012 | The specified master mode authentication list is being used. [ERROR_IPSEC_MM_AUTH_IN_USE (0x32D4)] |
| Error code 13013 | The specified default master mode policy was not found. [ERROR_IPSEC_DEFAULT_MM_POLICY_NOT_FOUND (0x32D5)] |
| Error code 13014 | The specified default master mode authentication list was not found. [ERROR_IPSEC_DEFAULT_MM_AUTH_NOT_FOUND (0x32D6)] |
| Error code 13015 | The specified default express mode policy was not found. [ERROR_IPSEC_DEFAULT_QM_POLICY_NOT_FOUND (0x32D7)] |
| Error code 13016 | The specified tunnel mode filter exists. [ERROR_IPSEC_TUNNEL_FILTER_EXISTS (0x32D8)] |
| Error code 13017 | The specified tunnel mode filter was not found. [ERROR_IPSEC_TUNNEL_FILTER_NOT_FOUND (0x32D9)] |
| Error code 13018 | Main mode filter pending deletion. [ERROR_IPSEC_MM_FILTER_PENDING_DELETION (0x32DA)] |
| Error code 13019 | Transport filter pending deletion. [ERROR_IPSEC_TRANSPORT_FILTER_PENDING_DELETION (0x32DB)] |
| Error code 13020 | The tunnel filter is waiting to be deleted. [ERROR_IPSEC_TUNNEL_FILTER_PENDING_DELETION (0x32DC)] |
| Error code 13021 | The master mode policy is pending deletion. [ERROR_IPSEC_MM_POLICY_PENDING_DELETION (0x32DD)] |
| Error code 13022 | Main mode authentication packet waiting to be deleted. [ERROR_IPSEC_MM_AUTH_PENDING_DELETION (0x32DE)] |
| Error code 13023 | Quick mode policy pending deletion. [ERROR_IPSEC_QM_POLICY_PENDING_DELETION (0x32DF)] |
| Error code 13024 | The master mode policy was added successfully, but some of the requested views are not supported. [WARNING_IPSEC_MM_POLICY_PRUNED (0x32E0)] |
| Error code 13025 | The Express Mode policy was added successfully, but some of the requested views are not supported. [WARNING_IPSEC_QM_POLICY_PRUNED (0x32E1)] |
| Error code 13800 | ERROR_IPSEC_IKE_NEG_STATUS_BEGIN [ERROR_IPSEC_IKE_NEG_STATUS_BEGIN (0x35E8)] |
| Error code 13801 | IKE authentication credentials not accepted [ERROR_IPSEC_IKE_AUTH_FAIL (0x35E9)] |
| Error code 13802 | Unacceptable IKE security attributes [ERROR_IPSEC_IKE_ATTRIB_FAIL (0x35EA)] |
| Error code 13803 | IKE negotiation in progress [ERROR_IPSEC_IKE_NEGOTIATION_PENDING (0x35EB)] |
| Error code 13804 | General Processing Error [ERROR_IPSEC_IKE_GENERAL_PROCESSING_ERROR (0x35EC)] |
| Error code 13805 | Negotiation timed out [ERROR_IPSEC_IKE_TIMED_OUT (0x35ED)] |
| Error code 13806 | IKE failed to find a valid device certificate. Contact your network security administrator about installing a valid certificate in the appropriate certificate store. [ERROR_IPSEC_IKE_NO_CERT (0x35EE)] |
| Error code 13807 | IKE SA was deleted by peer before establishment was complete [ERROR_IPSEC_IKE_SA_DELETED (0x35EF)] |
| Error code 13808 | IKE SA was deleted before establishment was complete [ERROR_IPSEC_IKE_SA_REAPED (0x35F0)] |
| Error code 13809 | The negotiation request has been queued for too long [ERROR_IPSEC_IKE_MM_ACQUIRE_DROP (0x35F1)] |
| Error code 13810 | The negotiation request has been queued for too long [ERROR_IPSEC_IKE_QM_ACQUIRE_DROP (0x35F2)] |
| Error code 13811 | The negotiation request has been queued too long [ERROR_IPSEC_IKE_QUEUE_DROP_MM (0x35F3)] |
| Error code 13812 | The negotiation request has been queued too long [ERROR_IPSEC_IKE_QUEUE_DROP_NO_MM (0x35F4)] |
| Error code 13813 | No response from peer [ERROR_IPSEC_IKE_DROP_NO_RESPONSE (0x35F5)] |
| Error code 13814 | Negotiation took too long [ERROR_IPSEC_IKE_MM_DELAY_DROP (0x35F6)] |
| Error code 13815 | Negotiation took too long [ERROR_IPSEC_IKE_QM_DELAY_DROP (0x35F7)] |
| Error code 13816 | An unknown error occurred [ERROR_IPSEC_IKE_ERROR (0x35F8)] |
| Error code 13817 | Certificate revocation check failed [ERROR_IPSEC_IKE_CRL_FAILED (0x35F9)] |
| Error code 13818 | Invalid certificate key usage [ERROR_IPSEC_IKE_INVALID_KEY_USAGE (0x35FA)] |
| Error code 13819 | Invalid certificate type [ERROR_IPSEC_IKE_INVALID_CERT_TYPE (0x35FB)] |
| Error code 13820 | IKE negotiations failed because the device certificate used does not contain a private key. IPsec certificates require a private key. Contact your Network Security administrator about replacing it with a certificate that does have a private key. [ERROR_IPSEC_IKE_NO_PRIVATE_KEY (0x35FC)] |
| Error code 13821 | Simultaneous rekeys detected. [ERROR_IPSEC_IKE_SIMULTANEOUS_REKEY (0x35FD)] |
| Error code 13822 | Diffie-Hellman calculation failed [ERROR_IPSEC_IKE_DH_FAIL (0x35FE)] |
| Error code 13823 | I don't know how to handle the critical payload. [ERROR_IPSEC_IKE_CRITICAL_PAYLOAD_NOT_RECOGNIZED (0x35FF)] |
| Error code 13824 | Invalid header [ERROR_IPSEC_IKE_INVALID_HEADER (0x3600)] |
| Error code 13825 | Policy not configured [ERROR_IPSEC_IKE_NO_POLICY (0x3601)] |
| Error code 13826 | Signature verification failed [ERROR_IPSEC_IKE_INVALID_SIGNATURE (0x3602)] |
| Error code 13827 | Authentication failed using Kerberos [ERROR_IPSEC_IKE_KERBEROS_ERROR (0x3603)] |
| Error code 13828 | Peer certificate does not contain a public key [ERROR_IPSEC_IKE_NO_PUBLIC_KEY (0x3604)] |
| Error code 13829 | Payload error processing error [ERROR_IPSEC_IKE_PROCESS_ERR (0x3605)] |
| Error code 13830 | Error processing SA payload [ERROR_IPSEC_IKE_PROCESS_ERR_SA (0x3606)] |
| Error code 13831 | Error processing proposal payload [ERROR_IPSEC_IKE_PROCESS_ERR_PROP (0x3607)] |
| Error code 13832 | Error processing transposition payload [ERROR_IPSEC_IKE_PROCESS_ERR_TRANS (0x3608)] |
| Error code 13833 | Error processing KE payload [ERROR_IPSEC_IKE_PROCESS_ERR_KE (0x3609)] |
| Error code 13834 | Payload ID processing error [ERROR_IPSEC_IKE_PROCESS_ERR_ID (0x360A)] |
| Error code 13835 | Error processing certificate payload [ERROR_IPSEC_IKE_PROCESS_ERR_CERT (0x360B)] |
| Error code 13836 | Error processing certificate request [ERROR_IPSEC_IKE_PROCESS_ERR_CERT_REQ (0x360C)] |
| Error code 13837 | Error processing hash payload [ERROR_IPSEC_IKE_PROCESS_ERR_HASH (0x360D)] |
| Error code 13838 | Error processing signature payload [ERROR_IPSEC_IKE_PROCESS_ERR_SIG (0x360E)] |
| Error code 13839 | Error processing Nonce payload [ERROR_IPSEC_IKE_PROCESS_ERR_NONCE (0x360F)] |
| Error code 13840 | Payload notification processing error [ERROR_IPSEC_IKE_PROCESS_ERR_NOTIFY (0x3610)] |
| Error code 13841 | Error processing payload deletion [ERROR_IPSEC_IKE_PROCESS_ERR_DELETE (0x3611)] |
| Error code 13842 | Error processing VendorId payload [ERROR_IPSEC_IKE_PROCESS_ERR_VENDOR (0x3612)] |
| Error code 13843 | Invalid payload received [ERROR_IPSEC_IKE_INVALID_PAYLOAD (0x3613)] |
| Error code 13844 | Soft SA loaded [ERROR_IPSEC_IKE_LOAD_SOFT_SA (0x3614)] |
| Error code 13845 | Soft SA Torn Down [ERROR_IPSEC_IKE_SOFT_SA_TORN_DOWN (0x3615)] |
| Error code 13846 | An invalid cookie was received. [ERROR_IPSEC_IKE_INVALID_COOKIE (0x3616)] |
| Error code 13847 | Peer failed to send a valid device certificate [ERROR_IPSEC_IKE_NO_PEER_CERT (0x3617)] |
| Error code 13848 | Certificate revocation check failed for peer certificate [ERROR_IPSEC_IKE_PEER_CRL_FAILED (0x3618)] |
| Error code 13849 | New policy invalidates SAs configured using old policy [ERROR_IPSEC_IKE_POLICY_CHANGE (0x3619)] |
| Error code 13850 | No IKE master mode policy available. [ERROR_IPSEC_IKE_NO_MM_POLICY (0x361A)] |
| Error code 13851 | Failed to enable TCB privilege. [ERROR_IPSEC_IKE_NOTCBPRIV (0x361B)] |
| Error code 13852 | Failed to load SECURITY.DLL. [ERROR_IPSEC_IKE_SECLOADFAIL (0x361C)] |
| Error code 13853 | Failed to get security function table send address from SSPI. [ERROR_IPSEC_IKE_FAILSSPINIT (0x361D)] |
| Error code 13854 | Failed to query Kerberos packet for maximum token size. [ERROR_IPSEC_IKE_FAILQUERYSSP (0x361E)] |
| Error code 13855 | Failed to obtain Kerberos server credentials for the ISAKMP service / ERROR_IPSEC_IKE. Kerberos authentication will not work. The most likely cause is a lack of domain membership. This is normal if your computer is a member of a workgroup. [ERROR_IPSEC_IKE_SRVACQFAIL (0x361F)] |
| Error code 13856 | Failed to determine SSPI principal name for ISAKMP service / ERROR_IPSEC_IKE (QueryCredentialsAttributes). [ERROR_IPSEC_IKE_SRVQUERYCRED (0x3620)] |
| Error code 13857 | Failed to obtain a new SPI for the incoming SA from the Ipsec driver. The most common reason for this is that the driver does not have the correct filter. Check your policy to verify filters. [ERROR_IPSEC_IKE_GETSPIFAIL (0x3621)] |
| Error code 13858 | The specified filter is invalid [ERROR_IPSEC_IKE_INVALID_FILTER (0x3622)] |
| Error code 13859 | Memory allocation failed. [ERROR_IPSEC_IKE_OUT_OF_MEMORY (0x3623)] |
| Error code 13860 | Failed to add the security association to the IPSec driver. The most common cause is if IKE negotiations take a long time to complete. If the problem persists, reduce the load on the faulty device. [ERROR_IPSEC_IKE_ADD_UPDATE_KEY_FAILED (0x3624)] |
| Error code 13861 | Invalid policy [ERROR_IPSEC_IKE_INVALID_POLICY (0x3625)] |
| Error code 13862 | Invalid DOI [ERROR_IPSEC_IKE_UNKNOWN_DOI (0x3626)] |
| Error code 13863 | Invalid situation [ERROR_IPSEC_IKE_INVALID_SITUATION (0x3627)] |
| Error code 13864 | Diffie-Hellman failure [ERROR_IPSEC_IKE_DH_FAILURE (0x3628)] |
| Error code 13865 | Invalid Diffie-Hellman group [ERROR_IPSEC_IKE_INVALID_GROUP (0x3629)] |
| Error code 13866 | Payload encryption error [ERROR_IPSEC_IKE_ENCRYPT (0x362A)] |
| Error code 13867 | Payload decryption error [ERROR_IPSEC_IKE_DECRYPT (0x362B)] |
| Error code 13868 | Policy Match Error [ERROR_IPSEC_IKE_POLICY_MATCH (0x362C)] |
| Error code 13869 | Unsupported ID [ERROR_IPSEC_IKE_UNSUPPORTED_ID (0x362D)] |
| Error code 13870 | Hash verification failed [ERROR_IPSEC_IKE_INVALID_HASH (0x362E)] |
| Error code 13871 | Invalid hash algorithm [ERROR_IPSEC_IKE_INVALID_HASH_ALG (0x362F)] |
| Error code 13872 | Invalid hash size [ERROR_IPSEC_IKE_INVALID_HASH_SIZE (0x3630)] |
| Error code 13873 | Invalid encryption algorithm [ERROR_IPSEC_IKE_INVALID_ENCRYPT_ALG (0x3631)] |
| Error code 13874 | Invalid authentication algorithm [ERROR_IPSEC_IKE_INVALID_AUTH_ALG (0x3632)] |
| Error code 13875 | Invalid certificate signature [ERROR_IPSEC_IKE_INVALID_SIG (0x3633)] |
| Error code 13876 | Load failed [ERROR_IPSEC_IKE_LOAD_FAILED (0x3634)] |
| Error code 13877 | Deleted via RPC call [ERROR_IPSEC_IKE_RPC_DELETE (0x3635)] |
| Error code 13878 | A temporary state was created to perform a re-init. This is not a real failure. [ERROR_IPSEC_IKE_BENIGN_REINIT (0x3636)] |
| Error code 13879 | The lifetime value received in Responder Lifetime Notify is less than the minimum value configured for Windows 2000. Please fix the policy on the peer device. [ERROR_IPSEC_IKE_INVALID_RESPONDER_LIFETIME_NOTIFY (0x3637)] |
| Error code 13880 | The recipient cannot process the IKE version specified in the header. [ERROR_IPSEC_IKE_INVALID_MAJOR_VERSION (0x3638)] |
| Error code 13881 | The key length in the certificate is too small for the configured security requirements. [ERROR_IPSEC_IKE_INVALID_CERT_KEYLEN (0x3639)] |
| Error code 13882 | The maximum number of MM SAs applicable to the peer has been exceeded. [ERROR_IPSEC_IKE_MM_LIMIT (0x363A)] |
| Error code 13883 | IKE received a negotiation disable policy. [ERROR_IPSEC_IKE_NEGOTIATION_DISABLED (0x363B)] |
| Error code 13884 | The maximum speed limit for the main mode has been reached. A new main mode will start. [ERROR_IPSEC_IKE_QM_LIMIT (0x363C)] |
| Error code 13885 | The SA master mode has expired or the peer sent a master mode delete. [ERROR_IPSEC_IKE_MM_EXPIRED (0x363D)] |
| Error code 13886 | SA master mode is assumed invalid because the peer has stopped responding. [ERROR_IPSEC_IKE_PEER_MM_ASSUMED_INVALID (0x363E)] |
| Error code 13887 | The certificate is not associated with a trusted root in the IPsec policy. [ERROR_IPSEC_IKE_CERT_CHAIN_POLICY_MISMATCH (0x363F)] |
| Error code 13888 | An unexpected message ID was received. [ERROR_IPSEC_IKE_UNEXPECTED_MESSAGE_ID (0x3640)] |
| Error code 13889 | Invalid authentication offers received. [ERROR_IPSEC_IKE_INVALID_AUTH_PAYLOAD (0x3641)] |
| Error code 13890 | Sending a DOS cookie with initiator notification. [ERROR_IPSEC_IKE_DOS_COOKIE_SENT (0x3642)] |
| Error code 13891 | The IKE service is shutting down. [ERROR_IPSEC_IKE_SHUTTING_DOWN (0x3643)] |
| Error code 13892 | The binding between the CGA address and the certificate could not be verified. [ERROR_IPSEC_IKE_CGA_AUTH_FAILED (0x3644)] |
| Error code 13893 | Error processing NatOA payload. [ERROR_IPSEC_IKE_PROCESS_ERR_NATOA (0x3645)] |
| Error code 13894 | The main mode parameters are invalid for this express mode. [ERROR_IPSEC_IKE_INVALID_MM_FOR_QM (0x3646)] |
| Error code 13895 | The fast mode SA has expired by the IPsec driver. [ERROR_IPSEC_IKE_QM_EXPIRED (0x3647)] |
| Error code 13896 | Too many dynamically added IKEEXT filters detected. [ERROR_IPSEC_IKE_TOO_MANY_FILTERS (0x3648)] |
| Error code 13897 | ERROR_IPSEC_IKE_NEG_STATUS_END [ERROR_IPSEC_IKE_NEG_STATUS_END (0x3649)] |
| Error code 13898 | NAP re-authentication succeeded and the dummy NAP IKEv2 tunnel must be deleted. [ERROR_IPSEC_IKE_KILL_DUMMY_NAP_TUNNEL (0x364A)] |
| Error code 13899 | Error assigning the internal IP address of the initiator in tunnel mode. [ERROR_IPSEC_IKE_INNER_IP_ASSIGNMENT_FAILURE (0x364B)] |
| Error code 13900 | The configuration payload request is missing. [ERROR_IPSEC_IKE_REQUIRE_CP_PAYLOAD_MISSING (0x364C)] |
| Error code 13901 | Negotiation is in progress as the security principle that issued the connection. [ERROR_IPSEC_KEY_MODULE_IMPERSONATION_NEGOTIATION_PENDING (0x364D)] |
| Error code 13902 | SA was removed due to an IKEv1/AuthIP coexistence prevention check. [ERROR_IPSEC_IKE_COEXISTENCE_SUPPRESS (0x364E)] |
| Error code 13903 | The incoming SA request was dropped due to peer IP rate limiting. [ERROR_IPSEC_IKE_RATELIMIT_DROP (0x364F)] |
| Error code 13904 | Peer does not support MOBIKE. [ERROR_IPSEC_IKE_PEER_DOESNT_SUPPORT_MOBIKE (0x3650)] |
| Error code 13905 | Unauthorized SA creation. [ERROR_IPSEC_IKE_AUTHORIZATION_FAILURE (0x3651)] |
| Error code 13906 | Unauthorized SA creation due to insufficiently strong PKINIT-based credentials. [ERROR_IPSEC_IKE_STRONG_CRED_AUTHORIZATION_FAILURE (0x3652)] |
| Error code 13907 | Unauthorized SA creation. You may need to enter updated or different credentials, such as a smart card. [ERROR_IPSEC_IKE_AUTHORIZATION_FAILURE_WITH_OPTIONAL_RETRY (0x3653)] |
| Error code 13908 | Unauthorized SA creation due to insufficiently strong PKINIT-based credentials. This may be related to a failure to assign a certificate to an account for the SA. [ERROR_IPSEC_IKE_STRONG_CRED_AUTHORIZATION_AND_CERTMAP_FAILURE (0x3654)] |
| Error code 13909 | ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END [ERROR_IPSEC_IKE_NEG_STATUS_EXTENDED_END (0x3655)] |
| Error code 13910 | The SPI in the packet does not match a valid IPsec SA. [ERROR_IPSEC_BAD_SPI (0x3656)] |
| Error code 13911 | The packet was received on an IPsec SA that has expired. [ERROR_IPSEC_SA_LIFETIME_EXPIRED (0x3657)] |
| Error code 13912 | The packet received on an IPsec SA does not match the packet characteristics. [ERROR_IPSEC_WRONG_SA (0x3658)] |
| Error code 13913 | Packet sequence number replay verification failed. [ERROR_IPSEC_REPLAY_CHECK_FAILED (0x3659)] |
| Error code 13914 | The IPsec header and/or trailer in the packet is invalid. [ERROR_IPSEC_INVALID_PACKET (0x365A)] |
| Error code 13915 | IPsec integrity check failed. [ERROR_IPSEC_INTEGRITY_CHECK_FAILED (0x365B)] |
| Error code 13916 | IPsec dropped a clear text packet. [ERROR_IPSEC_CLEAR_TEXT_DROP (0x365C)] |
| Error code 13917 | IPsec dropped an incoming ESP packet in authenticated firewall mode. This drop is benign. [ERROR_IPSEC_AUTH_FIREWALL_DROP (0x365D)] |
| Error code 13918 | IPsec dropped a packet due to DoS throttling. [ERROR_IPSEC_THROTTLE_DROP (0x365E)] |
| Error code 13925 | IPsec DoS protection matched an explicit block rule. [ERROR_IPSEC_DOSP_BLOCK (0x3665)] |
| Error code 13926 | IPsec DoS Protection received an IPsec multicast packet that is not allowed. [ERROR_IPSEC_DOSP_RECEIVED_MULTICAST (0x3666)] |
| Error code 13927 | IPsec DoS Protection received an incorrectly formatted packet. [ERROR_IPSEC_DOSP_INVALID_PACKET (0x3667)] |
| Error code 13928 | IPsec DoS protection failed to lookup the state. [ERROR_IPSEC_DOSP_STATE_LOOKUP_FAILED (0x3668)] |
| Error code 13929 | IPsec DoS protection failed to create the state because the maximum number of entries allowed by the policy was reached. [ERROR_IPSEC_DOSP_MAX_ENTRIES (0x3669)] |
| Error code 13930 | IPsec DoS Protection received an IPsec negotiation packet for a module that is not allowed by policy. [ERROR_IPSEC_DOSP_KEYMOD_NOT_ALLOWED (0x366A)] |
| Error code 13931 | IPsec DoS protection is not enabled. [ERROR_IPSEC_DOSP_NOT_INSTALLED (0x366B)] |
| Error code 13932 | IPsec DoS protection failed to create an internal IP rate limit queue because the maximum number of queues allowed by the policy was reached. [ERROR_IPSEC_DOSP_MAX_PER_IP_RATELIMIT_QUEUES (0x366C)] |
| Error code 14000 | The requested section was not present in the activation context. [ERROR_SXS_SECTION_NOT_FOUND (0x36B0)] |
| Error code 14001 | The application failed to start because its side-by-side configuration is incorrect. Please check the application event log for more details. [ERROR_SXS_CANT_GEN_ACTCTX (0x36B1)] |
| Error code 14002 | The application binding data format is invalid. [ERROR_SXS_INVALID_ACTCTXDATA_FORMAT (0x36B2)] |
| Error code 14003 | The indicated assembly is not installed on your system. [ERROR_SXS_ASSEMBLY_NOT_FOUND (0x36B3)] |
| Error code 14004 | The manifest file does not start with the required tag and format information. [ERROR_SXS_MANIFEST_FORMAT_ERROR (0x36B4)] |
| Error code 14005 | The manifest file contains one or more syntax errors. [ERROR_SXS_MANIFEST_PARSE_ERROR (0x36B5)] |
| Error code 14006 | The application attempted to activate a disabled activation context. [ERROR_SXS_ACTIVATION_CONTEXT_DISABLED (0x36B6)] |
| Error code 14007 | The requested search key was not found in any active activation context. [ERROR_SXS_KEY_NOT_FOUND (0x36B7)] |
| Error code 14008 | The version of the component required by the application conflicts with the version of another component that is already active. [ERROR_SXS_VERSION_CONFLICT (0x36B8)] |
| Error code 14009 | The requested activation context section of type does not match the query API used. [ERROR_SXS_WRONG_SECTION_TYPE (0x36B9)] |
| Error code 14010 | Low system resources require disabling isolated activation of the current thread. [ERROR_SXS_THREAD_QUERIES_DISABLED (0x36BA)] |
| Error code 14011 | An attempt to set the default activation context for the process failed because the default activation context for the process has already been set. [ERROR_SXS_PROCESS_DEFAULT_ALREADY_SET (0x36BB)] |
| Error code 14012 | The specified encoding group ID was not recognized. [ERROR_SXS_UNKNOWN_ENCODING_GROUP (0x36BC)] |
| Error code 14013 | The requested encoding was not recognized. [ERROR_SXS_UNKNOWN_ENCODING (0x36BD)] |
| Error code 14014 | The statement contains a reference to an invalid URI. [ERROR_SXS_INVALID_XML_NAMESPACE_URI (0x36BE)] |
| Error code 14015 | The application manifest contains a reference to an uninstalled dependent assembly [ERROR_SXS_ROOT_MANIFEST_DEPENDENCY_NOT_INSTALLED (0x36BF)] |
| Error code 14016 | The manifest for the assembly used by the application contains a reference to a dependent assembly that is not installed [ERROR_SXS_LEAF_MANIFEST_DEPENDENCY_NOT_INSTALLED (0x36C0)] |
| Error code 14017 | The statement contains an invalid assembly identity attribute. [ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE (0x36C1)] |
| Error code 14018 | The manifest is missing the required default namespace specification on the assembly element. [ERROR_SXS_MANIFEST_MISSING_REQUIRED_DEFAULT_NAMESPACE (0x36C2)] |
| Error code 14019 | The statement has a default namespace defined in the assembly element but its value is not “urn |
| Error code 14020 | The checked private manifest crossed a path bound to a reparse point [ERROR_SXS_PRIVATE_MANIFEST_CROSS_PATH_WITH_REPARSE_POINT (0x36C4)] |
| Error code 14021 | Two or more components referenced directly or indirectly by the application manifest contain files with the same name. [ERROR_SXS_DUPLICATE_DLL_NAME (0x36C5)] |
| Error code 14022 | Two or more components referenced directly or indirectly by the application manifest have window classes with the same name. [ERROR_SXS_DUPLICATE_WINDOWCLASS_NAME (0x36C6)] |
| Error code 14023 | Two or more components referenced directly or indirectly by the application manifest have the same COM server CLSIDs. [ERROR_SXS_DUPLICATE_CLSID (0x36C7)] |
| Error code 14024 | Two or more components referenced directly or indirectly by the application manifest contain proxies for the same COM interface IID. [ERROR_SXS_DUPLICATE_IID (0x36C8)] |
| Error code 14025 | Two or more components referenced directly or indirectly by the application manifest have the same COM type library TLBIDs. [ERROR_SXS_DUPLICATE_TLBID (0x36C9)] |
| Error code 14026 | Two or more components referenced directly or indirectly by the application manifest have the same COM ProgIDs. [ERROR_SXS_DUPLICATE_PROGID (0x36CA)] |
| Error code 14027 | Two or more components referenced directly or indirectly by the application manifest are different versions of the same component, which is not allowed. [ERROR_SXS_DUPLICATE_ASSEMBLY_NAME (0x36CB)] |
| Error code 14028 | The component file does not match the verification information in the component manifest. [ERROR_SXS_FILE_HASH_MISMATCH (0x36CC)] |
| Error code 14029 | The policy statement contains one or more syntax errors. [ERROR_SXS_POLICY_PARSE_ERROR (0x36CD)] |
| Error code 14030 | Parse error appears |
| Error code 14031 | Parse error appears |
| Error code 14032 | Parse error appears |
| Error code 14033 | Parse error appears |
| Error code 14034 | Parse error appears |
| Error code 14035 | Parse error appears |
| Error code 14036 | Parse error appears |
| Error code 14037 | Parse error appears |
| Error code 14038 | Parse error appears |
| Error code 14039 | Parse error appears |
| Error code 14040 | Parse error appears |
| Error code 14041 | Parse error appears |
| Error code 14042 | Parse error appears |
| Error code 14043 | Parse error appears |
| Error code 14044 | Parse error appears |
| Error code 14045 | Parse error appears |
| Error code 14046 | Parse error appears |
| Error code 14047 | Parse error appears |
| Error code 14048 | Parse error appears |
| Error code 14049 | Parse error appears |
| Error code 14050 | Parse error appears |
| Error code 14051 | Parse error appears |
| Error code 14052 | Parse error appears |
| Error code 14053 | Parse error appears |
| Error code 14054 | Parse error appears |
| Error code 14055 | Parse error appears |
| Error code 14056 | Parse error appears |
| Error code 14057 | Parse error appears |
| Error code 14058 | Parse error appears |
| Error code 14059 | Parse error appears |
| Error code 14060 | Parse error appears |
| Error code 14061 | Parse error appears |
| Error code 14062 | Parse error appears |
| Error code 14063 | Parse error appears |
| Error code 14064 | Parse error appears |
| Error code 14065 | Parse error appears |
| Error code 14066 | Parse error appears |
| Error code 14067 | Parse error appears |
| Error code 14068 | Parse error appears |
| Error code 14069 | Parse error appears |
| Error code 14070 | Parse error appears |
| Error code 14071 | Parse error appears |
| Error code 14072 | Parse error appears |
| Error code 14073 | Parse error appears |
| Error code 14074 | Assembly Protection Error |
| Error code 14075 | Assembly Protection Error |
| Error code 14076 | Assembly Protection Error |
| Error code 14077 | The HRESULT could not be translated to a matching Win32 error code. [ERROR_SXS_UNTRANSLATABLE_HRESULT (0x36FD)] |
| Error code 14078 | Assembly Protection Error |
| Error code 14079 | The supplied assembly ID is missing one or more attributes that must be present in this context. [ERROR_SXS_MISSING_ASSEMBLY_IDENTITY_ATTRIBUTE (0x36FF)] |
| Error code 14080 | The supplied assembly ID contains one or more attribute names that contain characters that are not allowed in XML names. [ERROR_SXS_INVALID_ASSEMBLY_IDENTITY_ATTRIBUTE_NAME (0x3700)] |
| Error code 14081 | The indicated assembly could not be found. [ERROR_SXS_ASSEMBLY_MISSING (0x3701)] |
| Error code 14082 | The activation context stack for the running thread is corrupted. [ERROR_SXS_CORRUPT_ACTIVATION_STACK (0x3702)] |
| Error code 14083 | The application isolation metadata for this process or thread has become corrupted. [ERROR_SXS_CORRUPTION (0x3703)] |
| Error code 14084 | The activation context being deactivated is not the most recently activated context. [ERROR_SXS_EARLY_DEACTIVATION (0x3704)] |
| Error code 14085 | The activation context being deactivated is inactive for the current execution thread. [ERROR_SXS_INVALID_DEACTIVATION (0x3705)] |
| Error code 14086 | The activation context has already been deactivated. [ERROR_SXS_MULTIPLE_DEACTIVATION (0x3706)] |
| Error code 14087 | A component used by the isolation facility has requested that the process be terminated. [ERROR_SXS_PROCESS_TERMINATION_REQUESTED (0x3707)] |
| Error code 14088 | A kernel-mode component is releasing a reference in the activation context. [ERROR_SXS_RELEASE_ACTIVATION_CONTEXT (0x3708)] |
| Error code 14089 | The activation context for the default system assembly could not be created. [ERROR_SXS_SYSTEM_DEFAULT_ACTIVATION_CONTEXT_EMPTY (0x3709)] |
| Error code 14090 | The attribute value in the identity is not within the legal range. [ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_VALUE (0x370A)] |
| Error code 14091 | The attribute name in the identity is not within the legal range. [ERROR_SXS_INVALID_IDENTITY_ATTRIBUTE_NAME (0x370B)] |
| Error code 14092 | The identity contains two definitions for the same attribute. [ERROR_SXS_IDENTITY_DUPLICATE_ATTRIBUTE (0x370C)] |
| Error code 14093 | The identity string is malformed. This may be due to a trailing comma, more than two unnamed attributes, a missing attribute name, or a missing attribute value. [ERROR_SXS_IDENTITY_PARSE_ERROR (0x370D)] |
| Error code 14094 | The string containing the replaceable local content was invalid. Either the dollar sign ($) was followed by something other than a left parenthesis or another dollar sign, or the right parenthesis was not found for substitution. [ERROR_MALFORMED_SUBSTITUTION_STRING (0x370E)] |
| Error code 14095 | The public key token does not match the specified public key. [ERROR_SXS_INCORRECT_PUBLIC_KEY_TOKEN (0x370F)] |
| Error code 14096 | The replacement string was not set. [ERROR_UNMAPPED_SUBSTITUTION_STRING (0x3710)] |
| Error code 14097 | The component must be locked before submitting the request. [ERROR_SXS_ASSEMBLY_NOT_LOCKED (0x3711)] |
| Error code 14098 | The component store has been corrupted. [ERROR_SXS_COMPONENT_STORE_CORRUPT (0x3712)] |
| Error code 14099 | The advanced installer failed during setup or maintenance. [ERROR_ADVANCED_INSTALLER_FAILED (0x3713)] |
| Error code 14100 | The character encoding in the XML declaration does not match the encoding used in the document. [ERROR_XML_ENCODING_MISMATCH (0x3714)] |
| Error code 14101 | The data identities are the same but their contents are different. [ERROR_SXS_MANIFEST_IDENTITY_SAME_BUT_CONTENTS_DIFFERENT (0x3715)] |
| Error code 14102 | Component identities are different. [ERROR_SXS_IDENTITIES_DIFFERENT (0x3716)] |
| Error code 14103 | Assembly is not a deployment. [ERROR_SXS_ASSEMBLY_IS_NOT_A_DEPLOYMENT (0x3717)] |
| Error code 14104 | The file is not part of the assembly. [ERROR_SXS_FILE_NOT_PART_OF_ASSEMBLY (0x3718)] |
| Error code 14105 | The manifest size exceeds the maximum allowed size. [ERROR_SXS_MANIFEST_TOO_BIG (0x3719)] |
| Error code 14106 | The setting is not registered. [ERROR_SXS_SETTING_NOT_REGISTERED (0x371A)] |
| Error code 14107 | No one or more members are required for the transaction. [ERROR_SXS_TRANSACTION_CLOSURE_INCOMPLETE (0x371B)] |
| Error code 14108 | The SMI initial installer failed during setup or maintenance. [ERROR_SMI_PRIMITIVE_INSTALLER_FAILED (0x371C)] |
| Error code 14109 | A generic executable command displayed a result indicating failure. [ERROR_GENERIC_COMMAND_FAILED (0x371D)] |
| Error code 14110 | A component is missing file verification information in its manifest. [ERROR_SXS_FILE_HASH_MISSING (0x371E)] |
| Error code 15000 | The specified channel path is invalid. [ERROR_EVT_INVALID_CHANNEL_PATH (0x3A98)] |
| Error code 15001 | The specified query is invalid. [ERROR_EVT_INVALID_QUERY (0x3A99)] |
| Error code 15002 | Publisher metadata could not be found in the resource. [ERROR_EVT_PUBLISHER_METADATA_NOT_FOUND (0x3A9A)] |
| Error code 15003 | The event definition template could not be found in the resource (error = %1). [ERROR_EVT_EVENT_TEMPLATE_NOT_FOUND (0x3A9B)] |
| Error code 15004 | The specified publisher name is invalid. [ERROR_EVT_INVALID_PUBLISHER_NAME (0x3A9C)] |
| Error code 15005 | The event data raised by the publisher does not match the event template definition in the publisher manifest [ERROR_EVT_INVALID_EVENT_DATA (0x3A9D)] |
| Error code 15007 | The specified channel could not be found. Check the channel configuration. [ERROR_EVT_CHANNEL_NOT_FOUND (0x3A9F)] |
| Error code 15008 | The specified XML text is not properly formatted. See Extended Error for more details. [ERROR_EVT_MALFORMED_XML_TEXT (0x3AA0)] |
| Error code 15009 | The caller is attempting to subscribe to a direct channel which is not allowed. Direct channel events are passed directly to the log file and cannot be subscribed to. [ERROR_EVT_SUBSCRIPTION_TO_DIRECT_CHANNEL (0x3AA1)] |
| Error code 15010 | Configuration error. [ERROR_EVT_CONFIGURATION_ERROR (0x3AA2)] |
| Error code 15011 | The query result is stale/invalid. This may be due to a history flush or rollback after the query result was generated. Users should address this code by editing the query result object and reissuing the query. [ERROR_EVT_QUERY_RESULT_STALE (0x3AA3)] |
| Error code 15012 | The query result is currently in an invalid state. [ERROR_EVT_QUERY_RESULT_INVALID_POSITION (0x3AA4)] |
| Error code 15013 | The MSXML registry does not support validation. [ERROR_EVT_NON_VALIDATING_MSXML (0x3AA5)] |
| Error code 15014 | An expression can only follow a scope operation change if it evaluates to a node set and is not already part of another scope operation change. [ERROR_EVT_FILTER_ALREADYSCOPED (0x3AA6)] |
| Error code 15015 | A step operation cannot be performed on a term that is not an element set. [ERROR_EVT_FILTER_NOTELTSET (0x3AA7)] |
| Error code 15016 | The left-hand arguments of binary operators must be either attribute nodes or variables, and the right-hand arguments must be constants. [ERROR_EVT_FILTER_INVARG (0x3AA8)] |
| Error code 15017 | The step operation must either include a node test or, in the case of a predicate, an algebraic expression against which each node in the node set specified by the previous node set is tested. [ERROR_EVT_FILTER_INVTEST (0x3AA9)] |
| Error code 15018 | This data type is not currently supported. [ERROR_EVT_FILTER_INVTYPE (0x3AAA)] |
| Error code 15019 | A syntax error occurred at position %1!d! [ERROR_EVT_FILTER_PARSEERR (0x3AAB)] |
| Error code 15020 | This operator is not supported by this filter implementation. [ERROR_EVT_FILTER_UNSUPPORTEDOP (0x3AAC)] |
| Error code 15021 | An unexpected token was encountered. [ERROR_EVT_FILTER_UNEXPECTEDTOKEN (0x3AAD)] |
| Error code 15022 | The requested operation cannot be performed over an enabled direct channel. The channel must first be disabled before the requested operation can be performed. [ERROR_EVT_INVALID_OPERATION_OVER_ENABLED_DIRECT_CHANNEL (0x3AAE)] |
| Error code 15023 | Channel property %1!s! has an invalid value. The value is of an invalid type, is outside the valid range, cannot be updated, or is not supported by this channel type. [ERROR_EVT_INVALID_CHANNEL_PROPERTY_VALUE (0x3AAF)] |
| Error code 15024 | Publisher property %1!s! has an invalid value. The value is of an invalid type, is outside the valid range, cannot be updated, or is not supported by this type of publisher. [ERROR_EVT_INVALID_PUBLISHER_PROPERTY_VALUE (0x3AB0)] |
| Error code 15025 | Channel failed to activate. [ERROR_EVT_CHANNEL_CANNOT_ACTIVATE (0x3AB1)] |
| Error code 15026 | The xpath expression exceeds the supported complexity. Please simplify or split it into two or more simple expressions. [ERROR_EVT_FILTER_TOO_COMPLEX (0x3AB2)] |
| Error code 15027 | The message resource exists but the message was not found in the thread/message table. [ERROR_EVT_MESSAGE_NOT_FOUND (0x3AB3)] |
| Error code 15028 | The message ID for the requested message could not be found. [ERROR_EVT_MESSAGE_ID_NOT_FOUND (0x3AB4)] |
| Error code 15029 | The replacement string for insert index (%1) could not be found. [ERROR_EVT_UNRESOLVED_VALUE_INSERT (0x3AB5)] |
| Error code 15030 | The description string for parameter reference (%1) could not be found. [ERROR_EVT_UNRESOLVED_PARAMETER_INSERT (0x3AB6)] |
| Error code 15031 | The maximum number of replacements has been reached. [ERROR_EVT_MAX_INSERTS_REACHED (0x3AB7)] |
| Error code 15032 | The event definition for event ID (%1) could not be found. [ERROR_EVT_EVENT_DEFINITION_NOT_FOUND (0x3AB8)] |
| Error code 15033 | The resource specified for the requested message locale does not exist. [ERROR_EVT_MESSAGE_LOCALE_NOT_FOUND (0x3AB9)] |
| Error code 15034 | The resource is too old to be compatible. [ERROR_EVT_VERSION_TOO_OLD (0x3ABA)] |
| Error code 15035 | The resource is too new to be compatible. [ERROR_EVT_VERSION_TOO_NEW (0x3ABB)] |
| Error code 15036 | The channel at index %1!d! of the query could not be opened. [ERROR_EVT_CANNOT_OPEN_CHANNEL_OF_QUERY (0x3ABC)] |
| Error code 15037 | The publisher is disabled and its resource is unavailable. This typically occurs when the publisher is in the process of being uninstalled or upgraded. [ERROR_EVT_PUBLISHER_DISABLED (0x3ABD)] |
| Error code 15038 | An attempt was made to create a numeric type outside its valid range. [ERROR_EVT_FILTER_OUT_OF_RANGE (0x3ABE)] |
| Error code 15080 | Subscription activation failed. [ERROR_EC_SUBSCRIPTION_CANNOT_ACTIVATE (0x3AE8)] |
| Error code 15081 | The subscription log is disabled and cannot be used to redirect events. The log must first be enabled before the subscription can be activated. [ERROR_EC_LOG_DISABLED (0x3AE9)] |
| Error code 15082 | When forwarding events from the local machine to itself, the subscription query cannot contain the target record for the subscription. [ERROR_EC_CIRCULAR_FORWARDING (0x3AEA)] |
| Error code 15083 | The credential store used to store credentials is full. [ERROR_EC_CREDSTORE_FULL (0x3AEB)] |
| Error code 15084 | The credentials used by this subscription could not be found in the credential store. [ERROR_EC_CRED_NOT_FOUND (0x3AEC)] |
| Error code 15085 | No active channel was found for query. [ERROR_EC_NO_ACTIVE_CHANNEL (0x3AED)] |
| Error code 15100 | The resource loader failed to find the MUI file. [ERROR_MUI_FILE_NOT_FOUND (0x3AFC)] |
| Error code 15101 | The resource loader failed to load the MUI file because the file failed validation. [ERROR_MUI_INVALID_FILE (0x3AFD)] |
| Error code 15102 | The RC statement is corrupted with invalid data, an unsupported version, or a required element is missing. [ERROR_MUI_INVALID_RC_CONFIG (0x3AFE)] |
| Error code 15103 | The RC statement contains an invalid culture name. [ERROR_MUI_INVALID_LOCALE_NAME (0x3AFF)] |
| Error code 15104 | The RC statement contains an invalid name for the final fallback. [ERROR_MUI_INVALID_ULTIMATEFALLBACK_NAME (0x3B00)] |
| Error code 15105 | The MUI entry was not loaded into the resource loader cache. [ERROR_MUI_FILE_NOT_LOADED (0x3B01)] |
| Error code 15106 | The user stopped enumerating resources. [ERROR_RESOURCE_ENUM_USER_STOP (0x3B02)] |
| Error code 15107 | Failed to install the user interface language. [ERROR_MUI_INTLSETTINGS_UILANG_NOT_INSTALLED (0x3B03)] |
| Error code 15108 | Local installation failed. [ERROR_MUI_INTLSETTINGS_INVALID_LOCALE_NAME (0x3B04)] |
| Error code 15110 | The resource does not have a default or neutral value. [ERROR_MRM_RUNTIME_NO_DEFAULT_OR_NEUTRAL_RESOURCE (0x3B06)] |
| Error code 15111 | The PRI configuration file is invalid. [ERROR_MRM_INVALID_PRICONFIG (0x3B07)] |
| Error code 15112 | Invalid file type. [ERROR_MRM_INVALID_FILE_TYPE (0x3B08)] |
| Error code 15113 | Unknown qualification. [ERROR_MRM_UNKNOWN_QUALIFIER (0x3B09)] |
| Error code 15114 | The qualifier value is invalid. [ERROR_MRM_INVALID_QUALIFIER_VALUE (0x3B0A)] |
| Error code 15115 | No filter found. [ERROR_MRM_NO_CANDIDATE (0x3B0B)] |
| Error code 15116 | The ResourceMap or NamedResource contains an element that does not contain a default or neutral resource. [ERROR_MRM_NO_MATCH_OR_DEFAULT_CANDIDATE (0x3B0C)] |
| Error code 15117 | The ResourceCandidate type is invalid. [ERROR_MRM_RESOURCE_TYPE_MISMATCH (0x3B0D)] |
| Error code 15118 | Duplicate resource map. [ERROR_MRM_DUPLICATE_MAP_NAME (0x3B0E)] |
| Error code 15119 | Duplicate entry. [ERROR_MRM_DUPLICATE_ENTRY (0x3B0F)] |
| Error code 15120 | Invalid resource ID. [ERROR_MRM_INVALID_RESOURCE_IDENTIFIER (0x3B10)] |
| Error code 15121 | Filepath is too long. [ERROR_MRM_FILEPATH_TOO_LONG (0x3B11)] |
| Error code 15122 | Unsupported directory type. [ERROR_MRM_UNSUPPORTED_DIRECTORY_TYPE (0x3B12)] |
| Error code 15126 | Invalid PRI file. [ERROR_MRM_INVALID_PRI_FILE (0x3B16)] |
| Error code 15127 | NamedResource does not exist. [ERROR_MRM_NAMED_RESOURCE_NOT_FOUND (0x3B17)] |
| Error code 15135 | ResourceMap not found. [ERROR_MRM_MAP_NOT_FOUND (0x3B1F)] |
| Error code 15136 | Unsupported MRT profile type. [ERROR_MRM_UNSUPPORTED_PROFILE_TYPE (0x3B20)] |
| Error code 15137 | Invalid qualified operator. [ERROR_MRM_INVALID_QUALIFIER_OPERATOR (0x3B21)] |
| Error code 15138 | The qualifier value could not be determined or the qualifier value was not set. [ERROR_MRM_INDETERMINATE_QUALIFIER_VALUE (0x3B22)] |
| Error code 15139 | Automerge is enabled in the PRI file. [ERROR_MRM_AUTOMERGE_ENABLED (0x3B23)] |
| Error code 15140 | Too many resources were specified for the package. [ERROR_MRM_TOO_MANY_RESOURCES (0x3B24)] |
| Error code 15200 | The monitor returned a DDC/CI capability string that does not comply with the ACCESS.bus 3.0 DDC/CI 1.1 or MCCS 2 Revision 1 specification. [ERROR_MCA_INVALID_CAPABILITIES_STRING (0x3B60)] |
| Error code 15201 | The VCP version code for the monitor (0xDF) returned an invalid version value. [ERROR_MCA_INVALID_VCP_VERSION (0x3B61)] |
| Error code 15202 | The monitor does not comply with the MCCS specification it claims to support. [ERROR_MCA_MONITOR_VIOLATES_MCCS_SPECIFICATION (0x3B62)] |
| Error code 15203 | The MCCS version in the monitor's mccs_ver capability does not match the MCCS version reported by the monitor when using VCP version code (0xDF). [ERROR_MCA_MCCS_VERSION_MISMATCH (0x3B63)] |
| Error code 15204 | The Display Configuration API only works with displays that support the MCCS 1.0 specification, MCCS 2.0 specification, or MCCS 2.0 Revision 1 specification. [ERROR_MCA_UNSUPPORTED_MCCS_VERSION (0x3B64)] |
| Error code 15205 | An internal monitor configuration API error occurred. [ERROR_MCA_INTERNAL_ERROR (0x3B65)] |
| Error code 15206 | The monitor returned an invalid display technology type. CRT Plasma and LCD (TFT) are examples of display technology types. This error indicates that the monitor violates the MCCS 2.0 or MCCS 2.0 Revision 1 specification. [ERROR_MCA_INVALID_TECHNOLOGY_TYPE_RETURNED (0x3B66)] |
| Error code 15207 | The SetMonitorColorTemperature caller specified a color temperature that is not supported by the current monitor. This error indicates that the monitor violates the MCCS 2.0 or MCCS 2.0 Revision 1 specification. [ERROR_MCA_UNSUPPORTED_COLOR_TEMPERATURE (0x3B67)] |
| Error code 15250 | The requested system device could not be identified because there are too many indistinguishable devices that potentially match the identification criteria. [ERROR_AMBIGUOUS_SYSTEM_DEVICE (0x3B92)] |
| Error code 15299 | The requested system device could not be found. [ERROR_SYSTEM_DEVICE_NOT_FOUND (0x3BC3)] |
| Error code 15300 | Hash generation is not enabled for the specified hash version and hash type on the server. [ERROR_HASH_NOT_SUPPORTED (0x3BC4)] |
| Error code 15301 | The hash requested from the server is unavailable or is no longer valid. [ERROR_HASH_NOT_PRESENT (0x3BC5)] |
| Error code 15321 | The secondary interrupt controller instance that manages the specified interrupt is not registered. [ERROR_SECONDARY_IC_PROVIDER_NOT_REGISTERED (0x3BD9)] |
| Error code 15322 | The information provided by the GPIO client driver is invalid. [ERROR_GPIO_CLIENT_INFORMATION_INVALID (0x3BDA)] |
| Error code 15323 | The version specified by the GPIO client driver is not supported. [ERROR_GPIO_VERSION_NOT_SUPPORTED (0x3BDB)] |
| Error code 15324 | The registration packet provided by the GPIO client driver is invalid. [ERROR_GPIO_INVALID_REGISTRATION_PACKET (0x3BDC)] |
| Error code 15325 | The requested operation is not supported for the specified parameter. [ERROR_GPIO_OPERATION_DENIED (0x3BDD)] |
| Error code 15326 | The requested connection mode conflicts with an existing mode on one or more of the specified pins. [ERROR_GPIO_INCOMPATIBLE_CONNECT_MODE (0x3BDE)] |
| Error code 15327 | The interrupt you are trying to detect is unmasked. [ERROR_GPIO_INTERRUPT_ALREADY_UNMASKED (0x3BDF)] |
| Error code 15400 | The requested runlevel switch could not be completed successfully. [ERROR_CANNOT_SWITCH_RUNLEVEL (0x3C28)] |
| Error code 15401 | The service has an invalid runlevel setting. The runlevel of a service must not be higher than the runlevel of its dependent services. [ERROR_INVALID_RUNLEVEL_SETTING (0x3C29)] |
| Error code 15402 | The requested runlevel switch could not be completed successfully because one or more services will not stop or restart within the specified timeout. [ERROR_RUNLEVEL_SWITCH_TIMEOUT (0x3C2A)] |
| Error code 15403 | The runlevel switch agent did not respond within the specified timeout. [ERROR_RUNLEVEL_SWITCH_AGENT_TIMEOUT (0x3C2B)] |
| Error code 15404 | Run level switch is currently in progress. [ERROR_RUNLEVEL_SWITCH_IN_PROGRESS (0x3C2C)] |
| Error code 15405 | One or more services failed to start during the service startup phase of the runlevel adapter. [ERROR_SERVICES_FAILED_AUTOSTART (0x3C2D)] |
| Error code 15501 | The task stop request cannot be completed immediately because the task needs more time to close. [ERROR_COM_TASK_STOP_PENDING (0x3C8D)] |
| Error code 15600 | The package could not be opened. [ERROR_INSTALL_OPEN_PACKAGE_FAILED (0x3CF0)] |
| Error code 15601 | Package not found. [ERROR_INSTALL_PACKAGE_NOT_FOUND (0x3CF1)] |
| Error code 15602 | Package data is invalid. [ERROR_INSTALL_INVALID_PACKAGE (0x3CF2)] |
| Error code 15603 | Update package, dependency, or conflict validation failed. [ERROR_INSTALL_RESOLVE_DEPENDENCY_FAILED (0x3CF3)] |
| Error code 15604 | There is not enough disk space on your computer. Please free up some space and try again. [ERROR_INSTALL_OUT_OF_DISK_SPACE (0x3CF4)] |
| Error code 15605 | There was a problem downloading your product. [ERROR_INSTALL_NETWORK_FAILURE (0x3CF5)] |
| Error code 15606 | The package could not be registered. [ERROR_INSTALL_REGISTRATION_FAILURE (0x3CF6)] |
| Error code 15607 | The package cannot be unregistered. [ERROR_INSTALL_DEREGISTRATION_FAILURE (0x3CF7)] |
| Error code 15608 | The user canceled the installation request. [ERROR_INSTALL_CANCEL (0x3CF8)] |
| Error code 15609 | Installation failed. Please contact your software vendor. [ERROR_INSTALL_FAILED (0x3CF9)] |
| Error code 15610 | The removal failed. Please contact your software vendor. [ERROR_REMOVE_FAILED (0x3CFA)] |
| Error code 15611 | The provided package is already installed, and reinstallation of the package is blocked. Check the AppXDeployment-Server event log for details. [ERROR_PACKAGE_ALREADY_EXISTS (0x3CFB)] |
| Error code 15612 | The application could not start. Try reinstalling the application to fix the problem. [ERROR_NEEDS_REMEDIATION (0x3CFC)] |
| Error code 15613 | One of the prerequisites for installation could not be met. [ERROR_INSTALL_PREREQUISITE_FAILED (0x3CFD)] |
| Error code 15614 | The package store is corrupted. [ERROR_PACKAGE_REPOSITORY_CORRUPTED (0x3CFE)] |
| Error code 15615 | To install this application, you need either a Windows developer license or a system that supports sideloading. [ERROR_INSTALL_POLICY_FAILURE (0x3CFF)] |
| Error code 15616 | The application cannot be started because it is currently updating. [ERROR_PACKAGE_UPDATING (0x3D00)] |
| Error code 15617 | Package deployment blocked by policy. Please contact your system administrator. [ERROR_DEPLOYMENT_BLOCKED_BY_POLICY (0x3D01)] |
| Error code 15618 | The package could not be installed because the resources it modifies are currently in use. [ERROR_PACKAGES_IN_USE (0x3D02)] |
| Error code 15619 | The package could not be recovered because data necessary for recovery was corrupted. [ERROR_RECOVERY_FILE_CORRUPT (0x3D03)] |
| Error code 15620 | Invalid signature. To register in developer mode, AppxSignature.p7x and AppxBlockMap.xml must be valid or should not exist. [ERROR_INVALID_STAGED_SIGNATURE (0x3D04)] |
| Error code 15621 | An error occurred while deleting pre-existing application data for the package. [ERROR_DELETING_EXISTING_APPLICATIONDATA_STORE_FAILED (0x3D05)] |
| Error code 15622 | The package could not be installed because a higher version of this package is already installed. [ERROR_INSTALL_PACKAGE_DOWNGRADE (0x3D06)] |
| Error code 15623 | A binary system error has been detected. Try refreshing your computer to fix the problem. [ERROR_SYSTEM_NEEDS_REMEDIATION (0x3D07)] |
| Error code 15624 | A corrupted CLR NGEN binary was detected on the system. [ERROR_APPX_INTEGRITY_FAILURE_CLR_NGEN (0x3D08)] |
| Error code 15625 | The operation could not be resumed because data necessary for recovery is corrupted. [ERROR_RESILIENCY_FILE_CORRUPT (0x3D09)] |
| Error code 15626 | The package could not be installed because the Windows Firewall service is not running. Enable the Windows Firewall service and try again. [ERROR_INSTALL_FIREWALL_SERVICE_NOT_RUNNING (0x3D0A)] |
| Error code 15700 | The process has no package identity. [APPMODEL_ERROR_NO_PACKAGE (0x3D54)] |
| Error code 15701 | Package runtime information is corrupted. [APPMODEL_ERROR_PACKAGE_RUNTIME_CORRUPT (0x3D55)] |
| Error code 15702 | The package identity is corrupted. [APPMODEL_ERROR_PACKAGE_IDENTITY_CORRUPT (0x3D56)] |
| Error code 15703 | The process has no application identity. [APPMODEL_ERROR_NO_APPLICATION (0x3D57)] |
| Error code 15800 | Failed to load state store. [ERROR_STATE_LOAD_STORE_FAILED (0x3DB8)] |
| Error code 15801 | Failed to retrieve the application's state version. [ERROR_STATE_GET_VERSION_FAILED (0x3DB9)] |
| Error code 15802 | Failed to set the state version for the application. [ERROR_STATE_SET_VERSION_FAILED (0x3DBA)] |
| Error code 15803 | Failed to reset the application's structural state. [ERROR_STATE_STRUCTURED_RESET_FAILED (0x3DBB)] |
| Error code 15804 | The state manager failed to open the container. [ERROR_STATE_OPEN_CONTAINER_FAILED (0x3DBC)] |
| Error code 15805 | The state manager failed to create the container. [ERROR_STATE_CREATE_CONTAINER_FAILED (0x3DBD)] |
| Error code 15806 | The state manager failed to delete the container. [ERROR_STATE_DELETE_CONTAINER_FAILED (0x3DBE)] |
| Error code 15807 | The state manager failed to read the setting. [ERROR_STATE_READ_SETTING_FAILED (0x3DBF)] |
| Error code 15808 | The state manager failed to write the setting. [ERROR_STATE_WRITE_SETTING_FAILED (0x3DC0)] |
| Error code 15809 | The state manager failed to delete the setting. [ERROR_STATE_DELETE_SETTING_FAILED (0x3DC1)] |
| Error code 15810 | The state manager failed to query the setting. [ERROR_STATE_QUERY_SETTING_FAILED (0x3DC2)] |
| Error code 15811 | The state manager failed to read the composite setting. [ERROR_STATE_READ_COMPOSITE_SETTING_FAILED (0x3DC3)] |
| Error code 15812 | The state manager failed to write the composite setup. [ERROR_STATE_WRITE_COMPOSITE_SETTING_FAILED (0x3DC4)] |
| Error code 15813 | State manager failed to enumerate containers. [ERROR_STATE_ENUMERATE_CONTAINER_FAILED (0x3DC5)] |
| Error code 15814 | State Manager failed to enumerate settings. [ERROR_STATE_ENUMERATE_SETTINGS_FAILED (0x3DC6)] |
| Error code 15815 | The state manager composite setting value size exceeded the limit. [ERROR_STATE_COMPOSITE_SETTING_VALUE_SIZE_LIMIT_EXCEEDED (0x3DC7)] |
| Error code 15816 | The state manager setting value size exceeded the limit. [ERROR_STATE_SETTING_VALUE_SIZE_LIMIT_EXCEEDED (0x3DC8)] |
| Error code 15817 | The state manager setting name size exceeded the limit. [ERROR_STATE_SETTING_NAME_SIZE_LIMIT_EXCEEDED (0x3DC9)] |
| Error code 15818 | The state manager container name size exceeded the limit. [ERROR_STATE_CONTAINER_NAME_SIZE_LIMIT_EXCEEDED (0x3DCA)] |
| Error code 15841 | This API cannot be used in the context of the Student application type. [ERROR_API_UNAVAILABLE (0x3DE1)] |
