Smartphone charging technology has advanced to new heights over the past few years. There are smartphones that charge at up to 150 watts, giving you a full charge in less than 15 minutes. Aside from wired charging, we've also seen improvements in wireless charging on smartphones. Although it's much slower, it's still Wireless charging It gives you the added convenience of simply placing your phone on a surface to charge. This convenience can soon turn into a nightmare when you realize that despite placing your phone on a wireless charger, it hasn't gained any charge at all. If this happens to you frequently, here are some ways to fix wireless charging not working on your phone.
1. Connect the wireless charger to a compatible adapter.
While a wireless charger can charge your phone wirelessly, it still needs to be plugged into a wall outlet to receive power. Some wireless chargers come with an adapter right out of the box that you can use to connect the wireless charger to a power outlet.
However, some manufacturers don't ship an adapter with the charger. If this is the case with your wireless charger, you'll need to choose a fast-charging adapter for it to function properly. Most wireless chargers have a maximum output of 10-15 watts, which requires an adapter with at least 18 watts. If you're using your phone's old adapter, it may not provide enough power to charge your phone. Therefore, you'll need to get a compatible power adapter that can provide enough power to the charging base or disc.
2. Try a different cable.
Aside from the wall adapter, the cable you use to connect the charging brick to the wireless charger also plays an important role. A faulty cable can stop the wireless charger from working completely or cause intermittent disconnections that can temporarily halt wireless charging.
A good USB cable should fix this problem and allow for seamless wireless charging. Use it if the cable came with your wireless charger in the box. If you didn't receive one, check out some of the best fast charging cables you can buy for your wireless charger.
3. Remove the phone case and try charging again.
Wireless charging relies on two coils located on the smartphone and the wireless charging pad. For wireless charging to work properly, these coils must be stacked on top of each other without any obstructions. If you use a thick protective case on your smartphone, there's a good chance it will interfere with wireless charging.
Some materials don't work well with wireless charging. Remove any incompatible case that doesn't support wireless charging and place your phone on a wireless charger. The phone will charge normally; the problem lies with the case. Get a thinner case for your phone to use wireless charging with the case.
4. Use a QI-certified wireless charger
Most smartphones support wireless charging with chargers certified to the Qi wireless charging standard. While most wireless chargers are Qi-certified, some cheaper chargers are not.
It's important to choose a high-quality, Qi-certified wireless charger because it's safer and works well with most phones. Take a look at some of the best wireless chargers for your smartphone if you're planning to buy a new device.
5. Place the phone back on the wireless charger.
One drawback of wireless charging is that you have to position your phone in a certain way. This is because wireless charging relies on two coils stacked on top of each other. If the coils aren't aligned properly, wireless charging will stop working or keep disconnecting.
To fix this issue, carefully align and place your phone in the center of the wireless charging pad. Make sure the center of the back of your smartphone's lines is close to the center of the wireless charger. This should alleviate the issue.
6. Enable fast wireless charging on some phones
Wireless charging may work well, but it's very slow. So your smartphone essentially stays at the same battery level. Some phones integrate support for fast wireless charging, which you can enable manually. Here's how to enable it on Samsung devices, for example.
Step 1: Open Settings app On your smartphone, scroll down to Battery and Device Care section. Click on it.
Step 2: Locate Battery option.
Step 3: Scroll down and select More battery settings.
Step 4: Enable the toggle next to Fast wireless charging.
This will allow your phone to charge faster when using a compatible wireless charger.
7. If the phone is hot, let it cool down for a moment.
When wireless charging isn't very efficient, it emits heat. As a result, your smartphone may feel hot to the touch while charging wirelessly for an extended period. If your phone gets too hot, it may stop charging to protect the battery.
This could be why wireless charging isn't working with your phone. Take your phone off the wireless charger and set it aside to cool down for a while. After your phone cools down, place it back on the wireless charger and try charging it.
Charge your phone with ease
Wireless charging is convenient and hassle-free. Just place your phone on your pillow next to your bed, and you'll wake up fully charged. If you don't, follow these steps and you'll be able to fix your phone's wireless charging not working.
