Top 7 Ways to Fix 'Page Fault in Nonpaged Area' Error in Windows 10 and Windows 11

Blue Screen of Death (BSOD) errors are difficult to deal with. They appear suddenly, automatically restart your computer, and briefly display a stop code. One particularly annoying BSOD error is "Page Fault in Nonpaged Area," which can be caused by several underlying issues.

This blue screen of death error indicates a problem with a recently installed driver, or a faulty hardware (RAM or HDD), or a paging file issue. Try these seven methods to fix this blue screen of death error on your Windows computer.

1. Use Startup Repair

You can use the Startup Repair tool on the Windows Recovery Environment page to repair Startup issues with your Windows 11 PCYou can still access the Windows Recovery Environment page if you can't boot to the lock screen after a blue screen of death error. Here's how to do it:

Step 1: Press the power button to start your computer. Once the logo appears, press and hold power button To turn off your computer. Repeat this process 3-4 times, and your computer will automatically restart and launch the Windows Recovery Environment page.

Step 2: Click on an option find the mistakes and resolve it.

Step 3: Click square Advanced Options.

Step 4: Now, click on the option Startup repair.

Step 5: Your computer will then restart. Attempting a startup repair.

2. Check device drivers

A faulty driver can also cause the Blue Screen of Death to appear and produce the stop code: PAGE_FAULT_IN_NONPAGED_AREA on your computer. If you recently installed New GPU Driver Or your audio device or any other component, you must roll back the driver. Here's how to do it:

Step 1: Click on Windows key To open a menu Start. Type Device Manager in the search box and press Enter To open Device Manager.

Step 2: Locate the device and double-click it to open its properties. Switch to the tab Drivers.

Step 3: Click on an option Roll back the driver.

Step 4: Choose any option and click the button. Yeah.

Step 5: Close Device Manager and restart your computer.

3. Use the Windows Memory Diagnostic Tool

Since the “Page Fault in Nonpaged Area” error can be caused by a problem with the random access memory (RAM) or hard disk drive (HDD), you should check the RAM for errors, if any. You can use Windows Memory Diagnostic Tool Built-in to find RAM issues. Here's how:

Step 1: Click on Windows key To open start menu. Write Windows Memory Diagnostic in the search box and press Enter To open the tool.

Step 2: Click an option “Reboot now and check for problems (recommended).”

Step 3: Your computer will restart and load the Windows Memory Diagnostic Tool page. It will begin scanning your memory for errors. Your computer will then restart and boot to the lock screen.

Step 4: Log in to your computer. You'll see a pop-up notification from the Windows Memory Diagnostic Tool.

If the notification does not appear, you can use Event Viewer To check the Windows Memory Diagnostics log file, here's how:

Step 1: Click on Windows key To open the Start menu, type Event Viewer in the search box and press Enter.

Step 2: Go to the Recently Viewed Contracts section. Double-click the option. Windows Logs\System.

Step 3: Look for Enter memory diagnostic results Double click on it.

Step 4: If the record contains the message Windows Memory Diagnostic tested your computer's memory and found no errors.The RAM is good.

4. Perform a CHKDSK scan

After checking your RAM for errors, you should also check your hard drive using the Check Disk utility. It will search for errors on the drive and attempt to repair bad sectors and other errors. Here's how to run a CHKDSK scan:

Step 1: Press the Windows key to open the menu. Start. Type cmd In the search box, click on the Run as administrator option.

Step 2: The User Account Control window will appear. Click the button. "Yeah" To open a command prompt with administrator privileges.

Step 3: Type the following command and press Enter:

chkdsk /r

Step 4: You will see a message “The drive cannot be locked.”Type y and press . Enter.

Step 5: Close the command prompt window.

Step 6: Restart your computer.

The Check Disk utility will start scanning and repairing problems with your hard drive.

5. Run the hardware troubleshooter

Windows has several built-in troubleshooting tools to diagnose and fix problems with software and hardware components. Repeat the following steps to use the Hardware Troubleshooter:

Step 1: Click on Windows key To open Start menu. Type PowerShell in the search bar and tap Ctrl + Shift + Enter Keyboard shortcut at the same time.

Step 2: The User Account Control window will open. Click the button. "Yeah" To open PowerShell with administrator privileges.

Step 3: Type the following command and press Enter:

msdt.exe -id DeviceDiagnostic

Step 4: The Hardware Troubleshooter will open. Click the button next one.

Step 5: Wait while the troubleshooter diagnoses and fixes the problems. Then, close the window. Troubleshooter.

Step 6: Restart your computer.

6. Update BIOS

If you haven't updated your BIOS in a while, you should download and install the latest BIOS version updates on your computer. You'll need to manually visit your PC manufacturer's website and download the latest BIOS update.

Some computer makers ship Driver management utility To check for and download the latest updates, you'll then need to either run the installation file or put the BIOS on a USB drive and then install it on your computer.

7. Modify migration file settings

If the "Page Fault in Nonpaged Area" blue screen error doesn't go away after updating the BIOS, you can try modifying the paging file settings on your computer. Here's how:

Step 1: Click on Keyboard shortcut Windows + R To open the dialog box "employment". Type the following text and press Enter To open the Advanced System Properties window:

%windir%\system32\SystemPropertiesPerformance.exe

Step 2: Switch to tab Advanced Options.

Step 3: Click on the button Change Under the virtual memory section.

Step 4: Uncheck the check box Automatically resize paging file for all drives. Click the OK button.

Step 5: Close window Performance options.

Fix the annoying blue screen of death error

These were the seven ways to fix the “Page Fault in Nonpaged Area” error in Windows 10 and 11. Use Startup RepairCheck your RAM and hard drive for errors, check for missing device drivers, and finally, update your BIOS and adjust your paging file settings to fix the issue.