7 Ways to Get Out of the “Diagnose Your PC” Loop on Windows 11

After installing the latest Windows feature update, your computer may occasionally get stuck in an automatic repair loop. The operating system keeps saying it's diagnosing your computer, but no real progress is made. Forcing your device to restart rarely helps. If you're experiencing similar issues, read on to get out of the loop. Diagnose your computer On Windows.

Windows laptops experiencing the "Diagnosing your PC" error can waste hours of your productivity. Instead of getting work done, you spend most of your time looking at the loading indicator. If you're using an external device to power your computer, it can take up to several hours to complete the diagnostics.

What causes the “Diagnose your computer” issue?

Several factors can cause your computer to get stuck in a diagnostic loop. This can be due to insufficient space, corrupted system files, a buggy automatic repair tool, and more. You can try a number of tricks below to bypass the loading screen. Let's get started.

1. Turn off your computer and run automatic repair.

It's a useful trick to bypass the "Diagnose Your PC" screen. Here's what you need to do.

Step 1: Disconnect all external devices connected to your computer. Router Yours too. Make sure your computer can't connect to the Internet.

Step 2: Press and hold the . button energy Until your device turns off.

Step 3: click on the button energy Again to restart the device. Repeat this process. three times.

Step 4: After turning on your device for the third time, let it load. A message should appear. “Preparing automatic repair” On screen soon.

Step 5: Locate find the mistakes and resolve it.

Step 6: Locate Advanced Options.

Step 7: Click Startup repair.

Wait 30 minutes for the repair process to complete. Then, enable your internet connection.

2. Boot into safe mode and free up space.

You need to turn on your computer in Safe Mode And clearing up unnecessary space. This trick has worked for many people, and it's worth a try.

Step 1: Turn on your Windows device and press F8 . key repeatedly to run the menu Advanced boot options.

Step 2: Locate find the mistakes and resolve it.

Step 3: Click Advanced Options.

Step 4: Locate Startup Settings.

Step 5: Click Enable Safe Mode.

Step 6: Once Windows is booted into Safe Mode, press Windows + R keys to open Playlist. Write cleanmgr And press Enter.

Step 7: Locate disc which you want to clean and click OK.

Step 8: Locate Files that you want to clean and press OK.

Restart your computer to normal mode, and you'll be good to go.

3. Run SFC and DISM scans

Corrupted system files can cause such errors on your computer. It's time to run SFC and DISM scans using the steps below.

اFor step 1: Go to the Advanced Options menu on your computer and select Command Prompt.

Step 2: Run the following command. Here.

sfc / scannow

Step 3: Run the following commands and press Enter After each one.

Dism / Online / Cleanup Image / CheckHealth

Dism / Online / Cleanup Image / ScanHealth

Dism / Online / Cleanup Image / RestoreHealth

Restart your computer and try again.

4. System Restore

You can use a restore point recorded on your computer to restore Windows and fix such issues.

Step 1: Open the Advanced Options menu on Windows and select system recovery.

Step 2: Click next one.

Step 3: check box Show more restore points Select a Windows restore point. Click Next.

Step 4: Click on ending Restart your computer as usual.

5. Uninstall the update

Most likely, the update files failed to install properly. This is why your computer remains stuck in this repair loop while it attempts to diagnose your computer.

Step 1: Launch the advanced options menu and select Uninstall updates.

Step 2: All you have to do is press Uninstall the latest update For features.

Step 3: Enter your administrator password when prompted. Wait for your computer to finish. Uninstall the updateCheck if you can operate your device normally.

6. Disable automatic repair

This trick has worked for many Windows users, and it's worth trying on your own. The Startup Repair utility runs automatically every time your system starts, and sometimes it can prevent you from getting past the "Diagnose Your PC" screen.

Step 1: Go to Advanced Options and select Startup settings.

Step 2: Click on Enable safe mode.

Step 3: Press Windows + R keys to open the Run menu and press cmd. Click OK.

Step 4: Run the following command and press Enter.

bcdedit /set recoverenabled NO

Restart your computer.

7. Use a USB recovery drive

If your computer won't boot, you can use a USB recovery drive to fix the issue. You'll need a 16GB USB flash drive to create and store the recovery image. If you don't have a recovery image, you can create one using another computer.

Step 1: click on the button energy To turn off your device.

Step 2: Enter USB drive To recover on your computer.

Step 3: When prompted, select the option that allows you to boot your device from a USB drive instead. hard disk drive You have.

Step 4: Locate recovery From a drive to reinstall the operating system from USB drive bootable.

Step 5: Select an option recovery to start the process.

Wait while your device reinstalls Windows.

Start using your Windows computer

A buggy installed program could be the main culprit here. Once you've bypassed the "Diagnosing Your PC" error,Uninstall unnecessary applications From your computer. It fixes Windows glitches and frees up space on your device. Which trick worked for you? Share your results in the comments below.